I already installed 64 bit WIndows 7 on my iMac 8,1. is this "right?"

i installed W7 on my imac from 08. and, i read this from the website:
These Macs can use 64-bit editions of Windows Vista and Windows 7:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro (15-inch, Early 2008) and later
MacBook Pro (17-inch, Early 2008) and later
Mac Pro (Early 2008) and later
iMac (21.5 inch, Late 2009)
iMac (27-inch, Late 2009)
iMac (27-inch, Quad Core, Late 2009)
MacBook (13-inch, Late 2009)
mine isn't in here. it that oaky?

Never mind, problem solved. See this post:
http://discussions.apple.com/thread.jspa?threadID=2319285&tstart=0

Similar Messages

  • Can i install 64 bit Windows 7 on my iMac? It was purchased in July 2011

    I need to purchase a copy of Windows 7 Ultimate to install on my iMac using bootcamp. Can someone confirm if 64 bit version of Microsoft's OS will install on my iMac. The machine was purchased in July 2011.
    Following are the specification:
    Processor: 2.7 GHz Intel Core i5
    Memory: 4Gb 1333 MHz DDR3
    Software: Mac OS X Lion 10.7.3
    Thank you
    KT

    64-bit Windows will run on all Intel Core 2 Duo or later Macs. But here's what you want:
    Boot Camp- Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7

  • HT1529 Part 1: Will a Late 2008 Unibody MacBook upgrade to Maverick?  Will I be able to install 64 bit Windows 8 on Bootcamp?

    Part 1: Will a Late 2008 Unibody MacBook upgrade to Maverick?  Will I be able to install 64 bit Windows 8 on Bootcamp?

    OS X Mavericks: System Requirements

  • I am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk

    i am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk

    Launch the Terminal app, copy & paste this command into the window that pops up, and hit the return key. At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key.
    sudo chflags 0 /Volumes/
    Then, copy & paste these next two, one at time, into the window and hit the return key after each:
    sudo chmod a+rx /Volumes/*
    killall Finder
    Quit the Terminal app and try installing again.

  • Black screen while installing 64 bit Windows 7 on early 2010 MBP.

    Hi,
    I just tried doing a clean install of Windows. After partioning the hardrive my system booted into a black screen. It does not have the blinking cursor like I see on other forums.
    I was trying to install a 64 bit Windows 7 on my MBP Early 2010.

    Forgot to mention, it is a 13". But I don't think that is relevant to this matter

  • Boot Camp wont install 64 bit Windows 7 on iMac 2012

    Hello guys,
    I just bought the iMac 27" Late 2012 and im looking into installing Windows 7 via bootcamp.
    At first I downloaded 32 bit Windows from DigitalRiver and tried to install Windows it then let me know that 64bit Windows was required. So I went ahead and downloaded the 64 bit Windows 7 and tried again but it is still giving me the same issue as before "BootCamp only supports 64-bit Windows installation on this platform..."
    What can I do about this?

    Hi billbennettnz,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    Boot Camp Help: Install Windows on your Mac
    https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
    Boot Camp 5.1: Frequently asked questions
    http://support.apple.com/kb/HT5639
    Can I use a downloaded (ISO) version of Windows with Boot Camp?
    MacBook Air (Mid 2011 and later), MacBook Pro (Mid 2012 and later, including Retina models), Mac mini (Mid 2011 and later), and iMac (Late 2012) can install downloaded (ISO) versions of Windows 7 and 8.
    To determine if your Mac supports this feature:
    Click the Go menu and choose Utilities.
    Open Boot Camp Assistant.
    Click Continue. If you see a "Create a Windows 7 or later install disk" checkbox, your Mac supports the use of downloaded (ISO) install images. See the Boot Camp Installation & Setup Guide for more information.
    I hope this information helps ....
    - Judy

  • Can't install 64 Bit Windows 7 on 13" MBP???

    Hello everyone! I'm trying to install 64 Bit Win 7 on my 13" MBP The version of the Bootcamp Assistant I am running (3.02) only allows for the 32 bit version to be installed. I am fully updated on my OSX updates, yet I see that I should be running Bootcamp 3.2 (not sure if "bootcamp" and "bootcamp assistant" are synonymous here).
    I tried to find a 3.2 update (for bootcamp assistant) on the Bootcamp downloads page, and the only thing I could find were the bootcamp Windows Executuables (nothing for the OSX side).
    Obviously I am doing something wrong. Anyone care to explain what I am missing?

    Do you really need 64 bit version of Windows? 32 bit should be fine. I am running 32 bit Windows 7 Ultimate. It works great so far.

  • Can we install 32 bit windows 7 on MBA

    can i install windows 7 32bit on 64bit mba earl 2008?and how to do thta?boot camp not allowing me and i am a newbie.help

    "boot camp not allowing me" tells us nothing that would allow us to help you. How are you trying to Boot Camp and what exact error messages are you seeing?
    From http://support.apple.com/kb/HT5634 it appears your computer is supported as is Windows 7 32 bit.
    Mac model
    Windows 8
    64-bit
    Windows 7
    64-bit
    Windows 7
    32-bit
    Windows Vista
    64-bit
    Windows Vista
    32-bit
    Windows XP
    32-bit
    MacBook Air (13-inch, Mid 2013)
    BCA
    BCA
    MacBook Air (11-inch, Mid 2013)
    BCA
    BCA
    MacBook Air (13-inch, Mid 2012)
    5
    5
    4
    MacBook Air (11-inch, Mid 2012)
    5
    5
    4
    MacBook Air (13-inch, Mid 2011)
    5
    5
    4
    MacBook Air (11-inch, Mid 2011)
    5
    5
    4
    MacBook Air (13-inch, Late 2010)
    4
    4
    MacBook Air (11-inch, Late 2010)
    4
    4
    MacBook Air (13-inch, Mid 2009)
    4
    DVD
    DVD
    MacBook Air (13-inch, Late 2008)
    4
    DVD
    DVD
    MacBook Air (13-inch, Early 2008)
    4
    DVD
    DVD

  • Can we install 32-bit Windows Grid Control on 64-bit 2008 Windows server ?

    Dear Guru's,
    We wish to install GRID for one of our 11.1.0.6 production database which is on 64-bit Windows 2008 (Enterprise Edt) server.
    As per http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html , Only Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0)available which is on 32- Bit.
    Now my concerns are :-
    1. Can we install Windows 32-bit 11g Grid Control Release 1 (11.1.0.1.0) on 64-bit Windows 2008 server ??
    2. This is 4GB database ( with less workload) , but since this is the special requirement from the client where he wants to have alert information for this database.
    Is there any alternate option than GRID which can fullfil the requirement of sending alerts ???
    Note :- This database is the only database at our site which is on diffrent network where we can't even use internet.( For sending alerts )
    Thanks in advance

    Are you planning on installing GC on the same host machine? Eh, not sure that's a great idea, at least for the OMSNo we are planning to install Grid control on dr server
    What did you read from the Installation guides - found via Documentation tab from the link you posted?I didn't understand your question ; My database is on 11.1.0.6 and hence i think i should go for 11gR1 Grid control. Please correct me if i am worng
    What "alerts" are you referring to? What's the "sending" requirements? We want basic alerts like diskspace full ,CPU Usage, Tablespace full , Alert log error etc..
    Is there any other tool / utility that i can use for the same ?

  • Installing and Unistalling Windows XP Pro on iMac pro

    I understadn from research that I can install Windows XP on my iMac Pro ( don't have it yet...) by using boot camp, this seems fairly straight forward. My question is can I uninstall it.
    My reasoning is that currently I am running some PLC programming software that is only XP supported, however there are inklings that these will be iMac compatable. I want to run the Xp version under boot camp, then upgrade to Mac OS when they are available.
    Is it possible to uninstall XP once installed?

    Go to this url and read all about Bootcamp from the best source.
    http://www.apple.com/support/bootcamp/
    You should especially read this guide before attempting any BootCamp installation or you might screw it up badly.
    http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf

  • Why i cannot install itune on windows 8.1?some dll required for this installation?

    Thanks for your help.

    Although you're getting a different error message, try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • Issue Installing 64 bit Windows 8

    Lenovo X230 Type 2306
    I cannot install a 64 bit operating system on my laptop. I am unsure if this is due to a bios setting or an operating system setting. I am trying to install Windows 8 Pro 64 bit from a usb flashdrive made using the Windows installer gui "create removable media". The installer defaults to a 32 bit installation on a x64 processor (i5 3320M, 8 gb ram). What do I need to fix in the bios to allow for a 64 bit installation?

    I may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
    Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it.
    Edited by: user12611524 on May 2, 2011 5:11 PM

  • Hello i have ps cs6 already installed on my Windows pc, i Want now to do the Installation on my Mac book. Error wring Aktivation Code. Is it Not possible to Use both?.

    Any Ideals?

    A creative Suite license is only good for the type of platform it is assigned for (PC versus Mac).  If you want to use a Windows version on a Mac you need to install some form of Windows emulator on the Mac.

  • TO change THUNDERBIRD(already installed & used on windows xp) english language to french one without loss.Necessary to unisntall the english version?

    I am using thunderbird english version(up to date)with a lost of message and i want to use thunderbird in french.I try many commands with menu but it seem that nothing good
    So I think to uninstall the english one to run the french one.
    Before doing this "Hows can i get the messages already in my computer?
    Many thanks
    PhD

    FAILEDTO LAUNCH FILES
    /c:\Documents & settings\Actif\application Data\comanyName\setup\prerequisites\requiredapplication_1\nderbird-24.3.08os=Win&lang=frerror:1155

  • When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

    It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
    Trying to update my ipad....but I first need to install itunes!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • [iPhone] How to create subdirectories in an .app file?

    In examining an .app file it looks like a completely flat filesystem, despite the way Xcode can display resources in different groups and subgroups. I am having some name collision issues for some art resources. Is there a way to tell xcode to build

  • Take a look at this build

    Hey all, I'm planning on building a custom rig when I get out of school for the summer. My plan is to build it so that I can continue running OSX without paying obscene money for a mac pro that hasnt been updated in over a year. I am aware of the ris

  • Can you connect your ipod to the tv like a tvo?

    can you just connect your ipod to your tv and record the shows that are on tv?

  • GetRequestURI outputs wrong path

    I've written a servlet Counter that outputs a jpeg image. I setContentType to "image/jpeg". And it works nicely when I coded a IMG tab ie. <IMG src="servlet/Counter"> in my index.htm page from the root directory. However I notice that the request.get

  • Generated Client ID is invalid due to the HTML 4.01 spec

    Hi! I have a simple JSF page, with a h:form component without any attributes. The generated code for the component is as follows: <form id="_id8" method="post" action= ...> </form>The problem is that, starting the id with '_' is invalid due to the HT