I also encounter a publishing error

The past few days, I have encountered a publishing error. I am using iWeb 1.1. When I publish, the content online does update, but iWeb gives an error message at the end and acts as if nothing has published. To update anything I have to update everything now (a time-consuming experience), as any change in iWeb does not register as published even though it does change online. I published to a folder without a problem. I deleted my sites from MobileMe and republished, but that had no effect.
Late tonight I got an email saying that I was getting an additional 60 days of MobileMe service in addition to the 30 days they gave me last month due to the rocky start. Could this publishing error relate to that?
Up until Friday (4 days ago) I had no problems with publish, except for last month after the big switch over to MobileMe. Is anyone else experiencing a publishing error where their sites actually update, but iWeb just does not want to recognize it?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

IWeb 1.1 Image Publishing Errors

When I try to publish my site, I encounter random publishing errors relating to images on my site.
Most of the time, they are images that I've never even heard of (and don't show up under a spotlight search either!). I'm assuming that they're images programed into the chosen template, but why would Apple put images into the templates that create errors? This would be the second time that I've uploaded my page to .mac with v1.1 and I had no problems the first time. All I changed was I added a few more blogs and some pictures.

Thank you for contacting Apple.
Apple is investigating an issue that can cause some to receive one of the the following alerts when using iWeb 1.1 to publish to their .Mac website:
- Unable to read your iDisk quota
- An error occurred while publishing file "[filename]".
- .Mac account credentials validation failed for account "[member name]"
We apologize for any inconvenience, and appreciate your patience as we investigate. We will email you again once we have more information regarding this.
Sincerely,
The .Mac Support Team

Unknown errors encountered during publish(EJB)

Hi,
I am getting following error while deploying simple stateless EJB.
Can anybody help. Please mail me.
I am pasting the error both from JDeveloper and from command prompt deployment.
==========================================
***From JDeveloper 3.2.2 It says***
*** Executing deployment profile E:\jdevloper\myprojects\Hello.prf ***
*** Generating archive file E:\jdevloper\myprojects\HelloSource.jar ***
Compiling the project...done
Validating the profile...done
Initializing deployment...done
Scanning project files...done
Generating classpath dependencies...done
Generating archive entries table...done
*** Archive generation completed ***
*** Deploying the EJB to 8i JVM ***
EJB deployment argument list:
"E:\jdevloper\java1.2\jre\bin\javaw" "-DPATH="standard jdev path"
-classpath "standard path of Jdev" oracle.aurora.ejb.deployment.GenerateEjb
-u system -p manager -s sess_iiop://10.5.0.55:2481:ORCL -republish -keep -temp TEMP
-descriptor "E:\jdevloper\myprojects\Hello.xml" -oracledescriptor E:\jdevloper\myprojects\Hello_oracle.xml
-generated "E:\jdevloper\myprojects\HelloGenerated.jar" "E:\jdevloper\myprojects\HelloSource.jar"
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.......................................done
Compiling Stubs...done
Generating Jar File...done
Loading EJB Jar file and Comm Stubs Jar file...done
Generating EJBHome and EJBObject on the server...done
Publishing EJBHome...
Unknown errors encountered during publish. Please check the server trace file
*** Errors occurred while deploying the EJB to 8i JVM ***
*** Deployment completed ***
==========================================
***Error occured while trying to deploy from command line.***
E:\jdevloper\myprojects>D:\oas9i\bin\deployejb.bat -u system -p manager -s sess_iiop://10.5.0.55:2481:orcl -republish -keep -temp temp -descriptor Hello.xml -oracledescriptor Hello_oracle.xml HelloSource.jar
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.......................................done
Compiling Stubs...done
Generating Jar File...done
Loading EJB Jar file and Comm Stubs Jar file...Exception in thread "main" org.omg.CORBA.COMM_FAILURE: java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read minor code: 0 completed: No
at com.visigenic.vbroker.orb.TcpConnection.read(TcpConnection.java:61)
at com.visigenic.vbroker.orb.GiopConnectionImpl.receive_message(GiopConnectionImpl.java:436)
at com.visigenic.vbroker.orb.GiopConnectionImpl.receive_reply(GiopConnectionImpl.java:347)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke(GiopStubDelegate.java:562)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke(GiopStubDelegate.java:503)
at com.inprise.vbroker.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:60)
at oracle.aurora.AuroraServices._st_JISLoadJava.add(_st_JISLoadJava.java:66)
at oracle.aurora.server.tools.sess_iiop.Loadjava.add(Loadjava.java:137)
at oracle.aurora.server.tools.sess_iiop.Loadjar.loadAndCreate(Loadjar.java:101)
at oracle.aurora.server.tools.sess_iiop.Loadjar.invoke(Loadjar.java:80)
at oracle.aurora.server.tools.sess_iiop.Loadjava.<init>(Loadjava.java:94)
at oracle.aurora.server.tools.sess_iiop.Loadjar.<init>(Loadjar.java:52)
at oracle.aurora.ejb.deployment.GenerateEjb.invoke(GenerateEjb.java:560)
at oracle.aurora.server.tools.sess_iiop.ToolImpl.invoke(ToolImpl.java:143)
at oracle.aurora.ejb.deployment.GenerateEjb.main(GenerateEjb.java:575)
=============================================
I have checked log also. This is the log from oracle trace file.
Session 13 exceeded soft sessionspace limit of 0x100000 bytes.
*** SESSION ID:(8.3994) 2001-06-23 17:44:30.625
jox_call_java_pres_: caught
ORA-04031: unable to allocate 4032 bytes of shared memory ("large pool","unknown object","joxu heap init","ioc_allocate_pal")
Please help me out of this si tuation.
regards,
vijay

You can try to set the java_pool_size and shared_pool_size to larger. This parameter is in the file: init.ora . The size should be large enough. Usually at least 50M.

HELP! Adobe Muse encountered an unexpected error and will have to be terminated. BD/getColorBoundsRe

I keep getthing message when my file loads in the program "This document contains 3 links to assets being unsampled. You should resize smaller or right-mouse click on the assets in the Assets panel to see additional options."
and then I click okay.
I get to the plan mode and then I try to go to the design mode (so i can fix the assets) and at about 90% loading it gives me this message "Adobe Muse encountered an unexpected error and will have to be terminated.
BD/getColorBoundsRect-ArgumentError: Error #2015: Invalid BitmapData." and i have to terminate the program...
How can i fix my assets so i can open my program? I use muse beta prerelease.

Well, after 20 hours of work and rebuilding most of my Muse website I finally was able to upload by site again.
Here was my problems per above and the last 20 hours. When publishing the site it does the following: Optimize assets, exportin desktip page 1 thru 19, Fining export HTML files then uploading images which I have 2208 on this site plus other stuff uploaded.
I can not answer why it now works as "normally"it would het error #2015 uring optimizing assets wich is an invalid bitmap data error and failed at only 9% publish process then got a 1125 index 0 is out of range0 at publish 20% complete.
I did rewrite most of the pages and made minor changes to all of them thinking that would force all pages to be uploaded as I also took option to upload all pages instead of just those that changes. All 2008 images were reloaded onto the pages by another hint I read on how to delete all thumbnails and thus the files is to select all and press delete and it will leave one as required. Then the one left could be deleted by itself. Thanks for whoever asked the question and who answered it. This saved me a lot of time.
Thanks to all that have taken the time to help me out. Muse is a great program but sometimes you don't have any idea if it is working at something so I found myself looking at the computer busy light to see if Muse was taking a lot of cycles. It would help to have a wider use of the cursor busy indicator as sometimes the system seemed like it was hung up but it was not.
Thanks guys!

The device has encountered an unexpected error. Installation error: application verification failed

the device has encountered an unexpected error. Installation error: application verification failed
I have been receiving this message over and over again when trying to publish my iOS app for the app store (I use Flash cc AIR 3.9.1.1080 for iOS and my settings are: "device testing in interpreter mode", as my app uses several swfs).
I have done everything from scratch, as recommended on other sections of the forums: new app ID from my apple developer account, new Distribution Certificates, new Distribution Provisioning Profiles and nothing works.
I can install my app on my iPad if I use the development Certificate and Provisioning Profile and everything seems OK. But as soon as I use the Distribution Certificate and Provisioning Profile get the same message:
the device has encountered an unexpected error. Installation error: application verification failed
I have done everything from the beggining over and over and nothing works. Am I the only one having this issue on Flash cc???

Hi Daniel:
I´m far from being an expert on Xcode (or any code) but this is what I did and it worked:
- On Xcode go to Preferences > Accounts > select your App Developer Account, then click "view details" on the lower right corner.
- There you can see which of your "Signing Identities" (Certificates) are "Valid". You should have at least one for Development and one for Distribution.
- Below that window there are two icons which you can use to add, export or revoke a "Signing Identitie" (Certificate).
- Choose the one you want to use (Develop. or Distrib.), export it to the folder of the app you are working on and name it in such a way you can relate it to your app. Before knowing this I was exporting them using Keychain Access and I wasn´t naming them to differentiate each one properly.
- On your Apple Developer account create the Provisioning Profile for your app. I deleted any App IDs or Prov. Profs. which were useless.
- Then on my Apple Developer account I generated a Development Prov. Prof. to install and test my app on my iPad. All went fine.
- Then an Ad Hoc Prov. Prof. again to install and test my app on my iPad. All went fine.
- Then I generated the App Store Prov. Prof. and I was able to install the app on my device without the upsetting error.
- Then I uploaded the app to iTunes Connect with no problem.
These link was useful for me: https://developer.apple.com/library/ios/technotes/tn2318/_index.html#//apple_ref/doc/uid/D TS40013777-CH1-TNTAG0
You can also search for "Certificates" and "Provisioning" on Xcode help.
Good luck!

Publishing Error: Insufficient Memory

Hi All,
I am using Captivate 4 with around 60 slides, now when I publish my project I always come across the following error:
I have tried different settings, such as making sure that there is no "compression" happening when publishing my project (Edit >Preferences >SWF Quality), also I have done restarting my computer for many times, started from a scratch and recreate my project. But still I encounter the same error over and over again, thus I am not able to publish my project.
Could you share insights and or suggestions on this particular error.
Thanks,
-Miguel

OK, I got it to work. I made a mistake in the order of operations, I think.
If you should recieve this error, this is how to resolve the problem if your system meets the same or similar specs as mine:
1. Check your environment variables and look for the JAVA_TOOL_OPTIONS. (Environment variables can be found in Windows 7 by clicking Start > Right click on Computer > Click Properties > Click Advanced System Settings > Click the Environmental Variables button.
If the JAVA_TOOL_OPTIONS variable exists, delete it.
2. Go to Control Panel > Programs and Features and remove all instances of Java, or Java Runtime Environment software.
3. Download and install the latest version of Java from the developer's website.
4. Once you have verified that you have the latest version of the JRE installed, go back to the Environmental Variables.
5. Under the System Variables (NOT the user variables) click New.
6. In the box next to Variable Name, type JAVA_TOOL_OPTIONS
7. In the box next to Variable Value, type -Xmx256M
8. Click OK, then click OK, then click again to close all the windows that are open.
9. Close Captivate 5 (if it is open) and restart the application.
10. Publish your project.
It should work fine after that. If it does not work, try restarting Windows and then publishing again.

IWeb publishing error unknown version 1.01

Help. I thought iWeb was supposed to be fairly simple!
I have a reasonable amount of content, which I have recently gone to a lot of hard work to transpose from homepage to iweb. It now won't publish. I get the above error message. I have looked for something to aid me with this, but it tends to be regarding version 1.1 (I haven't upgraded). I want to cry. Any ideas anyone? Is it because I changed a couple of site names? Are five photo pages with approximately 80 photos on more than 1 GB? I have gone into Domain, this indicates 1.1GB but I don't think that can be right! Also, I tried to publish to a folder - no success there either - the above error message again!
Please help me, I'm so frustrated I could pop!
Matt

"homepage transposed to iWeb"?
does that mean you have a homepage version of the photos then an iWeb published one?
then yeah it is likely you've exceeded the 1Gb space allotment in a single user .mac account. (80 photos x 5 x 2(homepage+iWeb versions) .... its possible to reach 1 Gb depending on the size of the photos
Play around with publishing to a free version of .mac . Create a new user on your computer and use that to publish to the new .mac account. See if you encounter problems publishing there, this way you can rule out whether it was your paid .mac account that's faulty or your ISP/network.
Lookslike you have to make a choice between homepage and iWeb. Just arrange your photos on iPhoto as you see fit (the 5 albums you want) and play around in iWeb.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem"

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

Hi hongkongpom,
Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah. My problem was resolved after that. Will list the chat history below in hopes that it may help you as well.
Good luck!
Samia
Chat Transcript
Friday, October 4, 2013 05:55 AM
Duration: 81 minutes 28 seconds
Rebekah:
Welcome to AppleCare chat support. Please give me a moment to look over your information.
Rebekah:
Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
Rebekah:
Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
SAMIA:
Sure, it's 8L8395UY2C5
SAMIA:
My problem is with iTunes.
Rebekah:
Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
SAMIA:
I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
SAMIA:
I don't have a problem with iPod.
SAMIA:
Just iTunes
Rebekah:
No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
Rebekah:
Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
SAMIA:
This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Rebekah:
Thanks for that info!
SAMIA:
Pleasure!
Rebekah:
What version of Windows (XP, Vista, 7) do you have?
SAMIA:
Windows 7
SAMIA:
Windows 7 Home Premium
Rebekah:
Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
SAMIA:
Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
SAMIA:
- AppleMobileDeviceSupport64
SAMIA:
- Bonjour64
SAMIA:
iTunes64
SAMIA:
SetupAdmin
SAMIA:
I selected Repair in all of them instead of Remove and all worked but iTunes64
SAMIA:
That's when I received the message that I sent you earlier.
SAMIA:
By the way, this is the fir st time something like this occured. I never had problems with installation before.
Rebekah:
I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Rebekah:
First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
SAMIA:
Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
SAMIA:
I closed all applications
SAMIA:
Also, my iTunes doesn't open anymore after the new failed installation.
Rebekah:
The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
Rebekah:
So no worries! We have the right article!
Rebekah:
On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
SAMIA:
I thought so after doing a little exploration.
SAMIA:
done
Rebekah:
Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
Rebekah:
After the uninstallation is complete, we don't want to restart your computer if you're prompted.
SAMIA:
Done
Rebekah:
Then if you see other iTunes entries on the list, we'll want to remove them the same way.
Rebekah:
Then we will remove all instances of Apple Software Update the same way you removed iTunes.
SAMIA:
Okay, but do I have to remoce iCloud as well?
SAMIA:
Rebekah, I received the same error message again when uninstalling
Rebekah:
We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
Rebekah:
How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
SAMIA:
I am unable to uninstall iTunes either
SAMIA:
Stopped completely
SAMIA:
I treied clicking Repair
Rebekah:
Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
SAMIA:
I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
Rebekah:
This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
SAMIA:
Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
Rebekah:
Awesome! I'm glad that worked!
Rebekah:
To be sure I am on the same page, what was the last component we uninstalled?
SAMIA:
iTunes
SAMIA:
Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
Rebekah:
That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
SAMIA:
Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
Rebekah:
The second one is Apple Mobile Device Support.
Rebekah:
The Application Support will be the last component we uninstall.
SAMIA:
Thanks! I'm on it.
SAMIA:
Done! ll 3 are gone, well 4 with iTunes. Now what?
Rebekah:
Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
SAMIA:
There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
Rebekah:
Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
SAMIA:
No
SAMIA:
Since I removed it
Rebekah:
Oh, perfect! If it was removed, we should be set!
Rebekah:
We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
Rebekah:
That should allow you to download iTunes!
SAMIA:
Shall I downloaad the latest vesion?
Rebekah:
You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
SAMIA:
Okay, thanks Rebekah!
Rebekah:
You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
SAMIA:
Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
Rebekah:
You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
Rebekah:
I hope you have a lovely day!
Rebekah:
It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
SAMIA:
Will do, thanks.

Report Server has encountered a SharePoint error.

Hi,
I am getting following error when i try to browse the reporting service url.
http://servername/ReportServer
Report Server has encountered a SharePoint error. The system cannot find the path specified. (Exception from HRESULT: 0x80070003)
It is configured in sharepoint integrated mode.
Created a site collection with "Business Intelligence Center" and published couple of reports and it gets renderd. Everything seems to be working except for browsing the reporting service URL. Here is the Log info.
******************** Start LOG Info ********************************************************
library!ReportServer_0-7!2b14!06/26/2012-03:26:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: , Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint
error. ---> System.IO.DirectoryNotFoundException: The system cannot find the path specified. (Exception from HRESULT: 0x80070003)
   at Microsoft.SharePoint.Library.SPRequestInternalClass.OpenWebInternal(String bstrUrl, Guid& pguidID, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale,
String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl, String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String&
pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl, String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, Int32& plSiteFlags, Boolean& pbOverwriteMUICultures, Boolean& pbMUIEnabled,
String& pbstrAlternateMUICultures, Int32& puiVersion, Int16& pnClientTag)
   at Microsoft.SharePoint.Library.SPRequest.OpenWebInternal(String bstrUrl, Guid& pguidID, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale, String&
pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl, String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl,
String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl, String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, Int32& plSiteFlags, Boolean& pbOverwriteMUICultures, Boolean& pbMUIEnabled, String& pbstrAlternateMUICultures,
Int32& puiVersion, Int16& pnClientTag)
   at Microsoft.SharePoint.SPWeb.InitWebPublic()
   at Microsoft.SharePoint.SPWeb.get_ID()
   at Microsoft.ReportingServices.SharePoint.Objects.RSSPImpWeb.get_ID()
   at Microsoft.ReportingServices.SharePoint.Utilities.CatalogItemUtilities.CreateCatalogItem(RSSPWeb web)
   at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.InternalFindObjects(ExternalItemPath wssUrl, CatalogItemList& children)
   at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.FindObjectsNonRecursive(ExternalItemPath wssUrl, CatalogItemList& childList, Security secMgr, IPathTranslator pathTranslator, Boolean appendMyReports)
   --- End of inner exception stack trace ---;
webserver!ReportServer_0-7!2b14!06/26/2012-03:26:56:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> System.IO.DirectoryNotFoundException:
The system cannot find the path specified. (Exception from HRESULT: 0x80070003)
***************************** END LOG info ***************************************
Any help is greatly appreciated.
Thanks and Regards,
Manjunath

Detach the contentdb from SP and then reattach it. To do that you'd run this command:
STSADM -o deletecontentdb -url https://******.com -databasename whateverdb
Then to add it back you'd do:
STSADM -o addcontentdb url https://******.com -databasename whateverdb
Thank you Mike Yin, I have confirmed that this solution works, I had the exact issue, my investigation steps are in this order:
1. Verify if there is a orphaned site (use stsadm.exe -o enumsites or stsadm -o enumallwebs or Test-SPContentDatabase
2. On my case I found the site orphaned on the root url [/] so I cannot just do a stsadm -o deletesite -force -siteid, so I did is to Remove Content from the CA and then re-add the content db back using CA. (Application Management > open the affected
Content DB and click the Remove content database checkbox. Then click Add a content Database, and re-add the same contentDB.
3. Verify in the RS Config Manager and click the RS Web Service URL, to see if works.

AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."

Adobe Media Encoder CC 2014 on MacPro "mid-2012" (MacPro5,1) running OSX 10.9.3 and getting this error when trying to launch Adobe Media Encoder CC 2014:
Adobe Media Encoder Error
Adobe Media Encoder has encountered an unexpected error and cannot continue.
Have uninstalled, reinstalled. Checked and fixed permissions numerous times. Tried removing all plugins and that didn't fix. Also tried editing the text listings within the .app for OpenGL and CUDA to remove all cards listed - that didn't fix anything either.
At this point it's uninstalled and "hopefully" everything will point to CC (non-2014 version). Adobe Media Encoder CC works fine. Adobe Media Encoder CS6 works fine.
Cannot find any other reports of this issue.

Progress in trying to fix. This workaround was NOT successful on previous attempts, but now appears to be working. Seems like the trick was to have AME CC 2014 started and open BEFORE doing any of this? As always, make sure all of your permissions are set properly - had done that numerous times previously. My issue was NOT directly permission related.
Navigate to the following folder:
You may see a file SHORTCUT that is invalid called "Presets":
Remove/delete this file. It's a broken shortcut.
Move a folder of .EPR files into the "8.0" folder. Call it anything except "Presets". Go to AME CC 2014 and quit. (I was greeted with another crash message.)
Open AME CC 2014 again. Your presets will not be loaded yet, but you should see an XML file that was created in your new folder like this:
Delete this file.
You should see a new folder also created by AME called "Presets". Move your .EPR files into this folder and delete the original folder. Quit AME CC 2014. (I was greeted with ANOTHER crash message.)
Open AME CC 2014. Your preset files should be there at the top under the preset browser:
Probably a good idea to keep a copy of those .EPR files elsewhere

Encountered an internal error in the SSL library

Hi,
We need to harden our environment according CIS standards. After applying those policies I am encountering following issue:
Unix/Linux agents managed by the interal Unix/Linux resource (Management Servers domain joined) pool turn grey with the
WS-Management Certificate Health in critical state. Some return healthy after a while... to fail again after a while.
When I resign the certificate through Discovery Wizard the agent turns healthy again... to return to a grey state again after a while.
Error in Health Explorer below:
ErrorMessage
WSManFault The server certificate on the destination computer (flexprod1.mydomain.net:1270) has the following errors:
Encountered an internal error in the SSL library.
While troubleshooting I found out that executing following results in an error
winrm e http://schemas.microsoft.com/wbem/wscim/1/cim-schema/2/SCX_Agent?__cimnamespace=root/scx -r:https://flexprod1.mydomain.net:1270
-u:scomuser -p:pswd -auth:basic -encoding:utf-8
WSManFault
Message = The server certificate on the destination computer (flexprod1.mydomain.net:1270) has the following errors:
Encountered an internal error in the SSL library.
Error number: -2147012721 0x80072F8F
A security error occurred
When I re-execute the command right afterwards... it succeeds! :-/ When I run the command 10 minutes afterwards, it fails again the
first time it is executed.
My guess the possibility it is related to above issue is likely.
I'm not having this issue on the gateway servers (not domain joined) where the policies are not applied.
P.s. Unfortunately I installed security and critical updates a few hours before applying the gpo so it could well be related to that
also.
Before I try to revert the changes made by the gpo... can anyone verify if a setting in the gpo can cause this issue?
Relevant part (I think) of the gpo below. Or does anyone know what this might be caused by or how to further troubleshoot this?
Thanks!
Microsoft network client: Digitally sign communications (always) Enabled
Microsoft Network Server
Policy Setting
Microsoft network server: Digitally sign communications (always) Enabled
Microsoft network server: Digitally sign communications (if client agrees) Enabled
Network Access
Policy Setting
Network access: Do not allow anonymous enumeration of SAM accounts and shares Enabled
Network Security
Policy Setting
Network security: LAN Manager authentication level Send NTLMv2 response only. Refuse LM & NTLM
Network security: Minimum session security for NTLM SSP based (including secure RPC) clients Enabled
Require NTLMv2 session security Enabled
Require 128-bit encryption Enabled
Network security: Minimum session security for NTLM SSP based (including secure RPC) servers Enabled
Require NTLMv2 session security Enabled
Require 128-bit encryption Enabled
System Cryptography
Policy Setting
System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing Enabled
System Settings
Policy Setting
System settings: Use Certificate Rules on Windows Executables for Software Restriction Policies Enabled
User Account Control
Policy Setting
User Account Control: Admin Approval Mode for the Built-in Administrator account Enabled
User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode Prompt for consent for non-Windows binaries
User Account Control: Switch to the secure desktop when prompting for elevation Enabled
Other
Policy Setting
Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings Enabled
Registry Values
Policy Setting
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ScreenSaverGracePeriod "0"
MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\SafeDllSearchMode 1
MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\DisableIPSourceRouting 2
MACHINE\System\CurrentControlSet\Services\Tcpip6\Parameters\DisableIPSourceRouting 2

Hi Steve,
Thanks for your reply.
I've managed to pinpoint the issue to the following gpo setting:
System cryptography: Use FIPS 140 compliant cryptographic algorithms, including encryption, hashing and signing algorithms
Description: For the Schannel Security Service Provider (SSP), this security setting disables the weaker Secure Sockets Layer (SSL) protocols and supports only the Transport Layer Security (TLS) protocols as a client and as a server (if applicable). If this
setting is enabled, Transport Layer Security/Secure Sockets Layer (TLS/SSL) Security Provider uses only the FIPS 140 approved cryptographic algorithms: 3DES and AES for encryption, RSA or ECC public key cryptography for the TLS key exchange and authentication,
and only the Secure Hashing Algorithm (SHA1, SHA256, SHA384, and SHA512) for the TLS hashing requirements.
Disabled the setting in a new gpo and everything returned to normal.
Grts.

I can't install itunes. I get an error code 2894 with a message stating that the installer has encountered an unexpected error. Anyone know what I need to do?

I can't install itunes. I get an error code 2894 & a message that states the installer has encountered an unexpected error installing this package. Anyone know what I need to do to fix this?

Are you able to uninstall iTunes and QuickTime?
You might have to search for the Windows Installer Cleanup Utility, which would allow you to remove some applications that you can't from Control Panel.
Also, take a look at this Apple document -> Trouble installing iTunes or QuickTime for Windows.

App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results

Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspx

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

I also encounter a publishing error

Similar Messages

Maybe you are looking for