I also have print to tape problems

When I try to print footage to tape, It only captures the audio.
I"m capturing onto my Sony HDR cam, on the DV setting.
I did suspect it might be that final cut pro is set for NSCT, and the camera is set for PAL ( want to print to PAL)
So I did change all the settings on Final cut to PAL, but still nothing.
I know I'm missing something, but I can't put my finger on it
Mac Pro

Hi Shane
I have upgraded my old system to the newest (new Mac Pro + lastest fcp)
As the fcp programe came from the USA, and I'm in Ireland, all the default settings was on NSTC.
So I went and changed them all to PAL.
Then when I tried to print to tape, and the problem occurred, I went back to the settings, and found that I Left 1 setting on NSTC. I then chaned it - that's why I thought it may be the source of my headache.
The footage was filmed in PAL, and I checked, captured in PAL aswell.
Even when I do a playback, with my camera (Sony HDR-FX1E) connected via firewire, it will only show the first frame of the sequence, and every frame I stop on..... audio plays 100% fine.
Mac Pro

Similar Messages

HDV Print-to-Tape problems

About a half hour into a "print to tape" from an HDV sequence to a Sony M25U HDV tape deck, I get an error message that has something to do about a specified file being locked [first issue]. Since I could not determine which file it was having a problem with I decided to render a complete self contained Quicktime and then output that.
When I try to print that to tape it skips [second problem] and it appears to do that with any rendered quicktime. I would think that FCP should have no problems with files that it rendered. This happens with multiple tape decks and FCP workstations.
Anyone else experiencing this? Any suggestions on how to resolve this?
Thanks

Cody,
I have a Z7 which should operate pretty much like the FX1. I did this about a month ago and remember struggling with it. Here are my notes, which may or may not help. It is only vague in my mind at the moment, sorry.
1. I am pretty sure when editing I had Render Control set to ProRes, as you do. When I did print to video, I copied my whole sequence, then put it into a new HDV sequence where the render was set to HDV. This took a long time--2:1 on my MacPro Dual 3GHz. I also have starred here--"When copy to HDV sequence, check titles/etc to make sure aspect ration still OK."
2. I have this part starred--"EACH TIME print to HDV tape on Z7U, go into Easy Set-up and choose HDV 1080i60. Defaults to custom which won't work."
3. Here are some more notes I took, which aren't particularly clear to me at the moment
PTV with the "Different settings" box checked and have this be HDV (1440x1080i60). That may have had to do with the fact I was using the MXO and monitoring with a second monitor. May not apply to you. I also see the note "Playback HAD been set to none".
4. Also this last note:
"Camera AV set to HDV, not 'auto' for this. Usually have on auto. Also FW out HDV-->DV is still ON, which is what need for timecode through AJA. Still seems to record into camera as HDV. Instruction book says to turn this 'off' when record HDV to tape, but seems to work either way."
Hope one of these notes helps you. If I had to pick one to try first, it would be #2. I had it starred the most
Sharon

Print to Tape problems

Keep getting the prompt "Check HDV/DV Input" when attempting to Print to Tape. My AV Devices are set to HDV(1440x1080)30p. I'm using the Canon XLH1 as a deck. Have changed firewires and rebooted. The item property of the sequence I'm trying to print is HDV 1080p30. The camera is on Mode Set HD and Frame Rate at F1, which is 30F.

I get the desktop image when I play and record to the deck.<<</div>
What are you playing? If you simply play the timeline in FCP you should get what's in your timeline recorded to your deck, not the desktop.
Any way, glad the other option worked.
rh

Print to tape problems-Get the audio but no video

I'm going from a QT file I brought into FCS and rendered, et al to tape. I'm able to get the audio track output but no video!
The QT original of my film was 720x486 NTSC 4:3 H.264 and is a .mov file format. Bringing this into FCS, FCS asks whether I want to automatically convert the thing to fit the specs offered in tape output - which, when I actually look in the dropdown for output settings, don't have a 720x486 but does have the usual 720 x 480. FCS chooses the 720 x 480. Ok, so fine. It converts the clip to 720 x 480 and playing back the rendered clip t 720 x 480 looks fine and saves to a QT file fine but when trying to get onto DV tape, the video won't print. I do know it's possible to get a print to tape of my film since a week or so ago, someone made a digibeta output of my film for me using FCS and it came out just fine (I didn't pay attention to what they were doing exactly and perhaps they did some magic that someone else here might be able to fill me in on...).
Anyway, I'm stuck - canNOT get the video track to output to tape. Any clues appreciated. I've been through the output setting module a million times, tried creating a new QT file original to work from, and have confirmed that the recorder works fine because other QT files we created worked fine - though they were 720x480. But shouldn't the conversion FCS does from 720x486 to 720x480 suffice????
Help!

H.264 isn't supported as an editing format in FCP... convert the files to a supported format. If it seems to be OK in playback in the Canvas, I'd suggest you export it as a QuickTime Conversion movie and choose DV as the format... reimport that and print to a DV deck/camera.
H.264 is a delivery format, not an editing format... resizing it probably hurt the picture too BTW... If it's really critical, then you should do the above to the source clips and re-edit, but choose ProRes as the codec, and keep it 720X486... no resize that way. Re edit in a ProRes sequence matching the frame rate and size. FCP will set it up for you when you drag to it just as it did before, but it will not resize in that case.
Jerry

Final cut pro print to tape problem

So i needed to print this news package on a tape, when i go to do it, all seems well until i play it back. all i see is black screen. We use firewire to a jvc mini dv tapedeck and mac book pro with fcp 7.03. Need help greatly.

Make sure your camera is getting a signal...
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

TS1843 I have a third party router, my IMAC keeps on dropping out when used wirelessly, I also have a laptop ,printer and ipod, I dont loose connectivity with them. My IMAC sits right next to the router, no problems when hardwired. need suggestions. t

my imac keeps on dropping out of the wireless network, when hardwired i have no problem. I also have a laptop,printer and ipod, all of which work fine. need advice or suggestion.

HI Paco, a couple of things to try to start with...
Change the Channel on the Router.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712

Problems with capturing and printing-to-tape using FCP4

Having trouble logging footage and printing to video using FCP4.
1) When we log-in footage (capture) it constantly stops and says, "dropped frames". This usually happens after 10-15 minutes of logging-in footage. Why is this happening??
2) When we Print-To-Tape, it will suddenly stop! Sometimes it will continue Printing-To-Tape, but without audio!
Is this a common problem? Should we re-install FCP4?
We've done all the software updates, but we're still experiencing these problems. We've also cleared up our computer by deleting old FCP4 projects.
We have a G4 with three internal Hard Drives with approx 180GB each. We're using the Sony DSR-11 as our Mini-DV deck.
Help!!!!

We don't have Virex or Norton software in the machine. We have Disk Warrior which was helpful in the past with other problems. Should I run another check using Disk Warrior?
We only have one machine which has three internal drives. We've experienced the same problems using each of the drives.
We do have some video stored in the system drive, but normally we don't use that drive. The system drive currently has 70GB availble, as do each of the other internal drives.
We have updated our FCP to 4.5, but should we trying re-installing it?

2 Problems Printing to Tape

1. I am using Print to Tape to put my sequence on MiniDV and for some reason when I record it, nothing is showing up on the tape. I know that the Device is connected to FCP because it starts recording automatically through Print to Tape. I am using an old Sony Handycam DCR-TRV38
2. In Print to Tape when the sequence is playing I get a dropped frame error. I have gone through the list in the FCP manual to troubleshoot and it helped in that the sequence played through about 15 minutes before the error appeared. Any other things I can do to get this to play through... I have got to get it onto MiniDV TODAY!!!

How full is your Capture Scratch drive?
It also helps to have a drive that's in good shape. If you have Disk Warrior, use it on the drive to clean things up.
Try doing an Audio Mixdown before printing to tape. (select the entire timeline then SEQUENCE >RENDER ONLY > MIXDOWN)
If the footage for the sequence you are trying to print is on more than one drive, make sure that your drives are not going to sleep. Check your energy saver preferences. There is also an application that can help with this, I believe it's called Drive Spindown. (A search here will probably find a link to it)
Finally, a good workaround for your problem might be to export your sequence to a self contained QT movie (use current settings) then import that file to a new sequence and print that to tape. That way FCP is only dealing with one file.
rh

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Timecode problems when Printing to tape HDV sequence

I have a project fully edited in HDV format and I want to make a master on tape to archive. I have done this before with no problems but now I have an odd issue. After FCP has printed to tape and I review the footage on the deck (camera is the recording device). The picture is on tape and looks fine but the timecode is not function properly. Instead of running continuously it freezes and then will skip forward some. Again the picture is there and looks fine. I have switched out the decks and the tapes and tried it 5 times but with the same results. What makes this more odd is the first hour of footage runs properly and then after that the problem starts.
I played back other projects like this that I did the same way and the timecode runs correctly. This is a very odd issue and hoping someone else has seen this before and can help. Thanks!

Try exporting the sequence as a self contained movie, then try recording that. My guts say the HDV you're working with is just not allowing your CPU to keep up with it all, and TC might be where this is showing up. But a single file playing back would make things easier on your system all round, and it's lossless. File/Export/QT movie... then check on make self contained, and leave off recompress all frames. This is lossless quality wise.
Sure it's not just dirty heads or something on your recording devices? LIkely not, but it's a shot in the dark from here.
Jerry

Problems printing to tape - Express HD

Hi
I am having problems exporting a movie to tape with Express – not on all projects just occasionally (and for no apparent reason I can see) and I’m finding it really puzzling.
I’ve checked easy set up option and its set to Firewire Pal Basic (I’m in the UK), refreshed video. Made sure the playback is set to high quality – and when I go through the print to tape routine the camera (canon 700i) appears to respond by moving from pause to record – but all I get is a black screen on the camera whilst the exporting movie appears on the Mac monitor.
Anybody got any clues – is there something I’m missing?
Many thanks for your help
John

I Print to Video using the "easy setup" : Apple Basic Firewire.
I import using "Apple - DV Converter". Seems strange that I have to switch setups depending on Inforamtion direction. {the two setups are adjacent in the easy setup menu, NTSC}.
Works both with tape and with a DVD recorder.
Discovered this by trial and err. Hope you spent less time than I did.
-wbajr tbc
My converter is an old ADVC 100 circa '03.
I was wondering if the ADVC 110 experiences the same "feature" or if there are any converters that don't need this "swap". Will ask as a separate post.
eMac DVD Mac OS X (10.4.5)

URGENT! Problem printing to tape

I have a Sony HDV-A1U video camera. I edited a video in FCP and I want to print the footage back to a tape. My camera is not being recognized by the computer. All my camera shows is a blue screen. My sequence is setup for HDV and my easy setup is configured for HDV. Any ideas?

You'll know some of this already but it's a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
Don't use iMovie for capturing (or printing to tape) - it doesn't give you a timecode and that's very important.
If none of the above works, then I suggest you trash our preferences. FCP gets it’s knickers in a twist from time to time and if you trash your preferences it will often sort things out (with no harm done to your project etc etc) . . .
Download FCP Rescue :
http://fcprescue.andersholck.com/
Once it’s downloaded, hit Backup first, then hit Trash. If the Trash does no good, hit Restore and everything's as it was. (Easy-Peasy)
FCP Rescue is freeware but there’s provision to make a donation if you wish – (it’s well worth it)
If you need reassurance about trashing your prefs, go to this Apple page:
http://docs.info.apple.com/article.html?artnum=302337
Or this Ken Stone page:
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Problems with iTunes/ipad2 I'm trying to buy FREE apps and I'm being told my card is declined but I also have more then enough credit on my account! Anyone having this problem?

Problems with iTunes/ipad2 I'm trying to buy FREE apps and I'm being told my card is declined but I also have more then enough credit on my account! Anyone having this problem?

Part of the validation for credit cards is that they need to be registered to exactly the same name and address that you have on your iTunes account, which prepaid cards tend not to be. Do you have a proper credit card that you could use ? Or are iTunes gift cards available in your country so that you could try using them as your payment method ?
Until you have a valid payment method on your account and what you owe iTunes has been paid off then you won't be able to download any item from the store, including free apps (and updates to apps).

Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.

thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?

I also have print to tape problems

Similar Messages

Maybe you are looking for