I always get an error during the process of the lastest itunes update on my windows 7 64 bit laptop, i have been installing the correct version for my laptop.

anytime i try to update to the latest itunes it does not work. i have a windows 7 64bit laptop.

When you get on the download page scroll down on the left hand side there is 64bit version. I installed it. But the thing I can't work out is in task manger says 32bit

Similar Messages

I have Mountain Lion OS X 10.8.5 using Safari, Version 6.0.5 is that the correct version for Safari?

I have Mountain Lion OS X 10.8.5 using Safari, Version 6.0.5 is that the correct version for Safari?

About Safari 6.1.1 for OS X Mountain Lion
This site says that Safari 6.1.1 is the version for Mountain Lion.

How do I get Itunes downloaded on a windows 7 32 bit laptop? I have tried many times and it will not recognize it. Thanks

Hi, how do I get Itunes downloaded on a laptop with windows 7 32 bit? I have tried , but failed many times. My daughter is going to get a new phone soon I would like her to be able to save her music to her laptop. Please help if you can. Thanks

If you have an IPHONE 3G and you will be getting a new upgrade soon will you be able to get your downloaded music easily on your new IPHONE??

I can't import more than 5 questions in GIFT format, even though I am not getting any errors during the process.

I created a GIFT file with 25 questions, but when I import into Captivate 8.0.1.242 I can only see the first 5 questions. I have triple-checked my import file for any syntax or other problems, but it seems perfectly fine.
Any ideas?

The info on Adobe's online help needs to be updated. You must save your text file in UTF-8 format, otherwise only the first five questions will be imported.

I cant seem to download the latest version of itunes to my laptop computer. I keep getting an error during the installation of assembley "Microsoft VC80.CRT.type="win 32".version="8.0.507276195"Please refer to Help and Support for more information. HRES7

I cant seem to download the latset version of itunes onto my laptop computer. I keep getting this error HRESULT: 0x8007054F. Dont know what that means. Please HELP!!!!!!!!!!!!!!

Hi tKalra - I got the same error and finally managed to install itunes successfully. Below is what happened with me.
I have Windows7 64 bit. I downloaded itunes 10.6.3 for windows64bit and started the installation wizard by opening the downloaded file. At one stage I got the same error you have mentioned above. I started googling to find a solution and thats how I found your post. Anyway I went through lot of other posts that suggested lot of different things but I just wanted to try my own thing first.
So what I did is to go through with the wizard by clicking ok on the error. I then got an error about apple mobile device service not running. I ignored and went ahead with the installation. Installation finished but the itunes wont start giving the service not running error. I tried to manually start the service but it gave a privilege error.
I then went to control panel and uninstalled itunes, apple mobile device thing and bonjour..basically what ever was from apple. Then I also went to start -> run -> regedit and checked for any registry keys for apple under local user and local computer. Deleted if found. Restarted and then just right clicked on the itunes setup file that was downloaded and ran it as administrator. That did it for me. So I am guessing it was privilege thing but not sure. Hope this helps.

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I'm trying to update my Itunes and keep getting an error message "The older version of Bonjour cannot be removed. Contact your technical group" What can I do or need to do?

What I said in the question. I have windows XP

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

How can I get Messages to show the correct time for read receipts?

Messages in Mountain Lion shows the wrong time for read receipts. For example, my iPad will show a message was read at 3:37 pm but if I open Messages on my MacBook, the read receipt shows the time that I opened the Messages app as opposed to the time the message was actually read. This is not too much of an issue if my iPad is handy, but really, shouldn't Messages on my MacBook be able to show the correct time the message was read? It syncs all the other infromation with Messages on iOs.
I should mention that if Messages is running on my MacBook when the recipient reads the message, then it does show the correct time the message was read. It's if Messages was not running and I re-launch it that the read receipt time gets mixed up.

HI,
As far as I am aware Messages marks or time stamps an iMessage at the time of receipt rather then the time you got around to reading it.
I will admit that in most cases reading and receiving as the app opens will be near enough the same time in some conversations.
Adding Time Stamps to Chat is what iChat has always done particularly with AIM based Chats.
The "Sync" in Messages is "display on all devices" and after that each iMessages is dealth with separately on each device.
There is no syncing of deleting/dimssing an iMessages or having read it on another device.
8:58 PM Tuesday; April 16, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

When starting I get an error: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. "

Each time I start up Firefox 4.0b6 I am getting the following error message: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. ". I run Firefox 3.6 as my standard Firefox browser in paralell.

See https://bugzilla.mozilla.org/show_bug.cgi?id=588511
(please do not comment in bug reports)

I get an error messge the Plugin container for Firefox failed

It causes Firefox to freeze up and I have to manually shut off my laptop.

This means that you have downloadd the file from the internet, and the file did not download completely so the computer can't play it. To fix this, just re-download the file and make sure it finishes.

All my apple software on my windows vista has stopped working.I tryed to uninstalland reinstall but I get R6034 error.everything was working perfect untill latest itunes update.Can you folks help?Quicktime,itunes icloud apple update and apple moblesupport

I am getting a microsft C++ dll is missing all after running latest update on dell vostro windows vista which was authorize as one of the devices I could use after buyig Ipad mini.Everything apple has stopped worng alone with the R6034 error apple mobledevice support isnt working or updates.All this from updating itune?I lost on this one folks,if any ideas I would be very gratefull Jamie ([email protected])

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Greetings. Can you please tell me why a bookmark is not always saved in the chosen folder? Also, Firefox crashes shortly after opening, periodically. (Both of these problems have been happening with different versions for sometime now.)

The bookmark problem occurs when I am creating a bookmark. When it occurs, the page is saved to another folder that was recently accessed, and random other folders' names are changed to the same name as the folder where the new bookmark was incorrectly saved.
The browser crashes only shortly after I open it, and I am closing a tab.

Bookmarking with Ctrl+D will bookmark to previously chosen folder.
'''Bookmarking with the bookmark star''' will bookmark to "Unsorted Bookmarks" folder (default), unless you have modified behavior with an Extension. The "[https://addons.mozilla.org/firefox/addon/3880/ Addbookmark Here2]" extension has some [http://dmcritchie.mvps.org/firefox/addbookmarkhere2.txt options] that might be confusing and are optional for those who are looking for old behavior.
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.
Please post only one question in a post, people looking for answers are going to be confused when looking for answers to either problem. For the secondary problem a Google search on [http://www.google.com/search?num=100&hl=en&newwindow=1&q=site%3Akb.mozillazine.org+-intitle%3Atalk+-inurl:%22/index.php?title=%22+-inurl%3A%22%2Findex.php%3Ftitle%3D%22+crashes+-intitle:talk&btnG=Search crashes] in the MozillaZine KB may help, particularly the first two hits. (I put the easiest to work with first).
* '''Problematic extensions''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Problematic_extensions
* '''Firefox crashes''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Firefox_crashes

Please help me to choose the correct version for my needs

Hi. Currently we have an ESXi server with 2 virtualized windows server 2012 standard edition. I want to setup a new server. His role will only be WDS. The server will have to be a domain controler in order to use WDS or is it not necessary ? If not could
i choose a foundation edition ? I must be able to deploy until 30 images at the same time. Thank you.

WDS has an option to be installed on a domain controller but it does not have to be a domain controller. It makes sense to have it as a member of a domain.
. : | : . : | : . tim

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

I'm trying to timestamp (RFC 3161) a pdf using my own timestamp server hardware but always get an error: "Certificate invalid for use" ...

I'm trying to timestamp (RFC 3161) a pdf using my own timestamp server hardware but always get an error: "Certificate invalid for use" (Original text - pt_BR:O certificado não é válido para uso). How can I get more info on what I'm missing or whats wrong with the certificate?

Which Acrobat version are you using? Do you use "Document Timestamp" command? If so, do you get this error during the signing process and the signature is not created or signature is created and you get this error when it is validated? If the latter you can open signature properties, click on the "Advanced Properties" and in the next dialog on timestamp's "Show Certificate". If you get this error during the signing process do you get an alert that shows some cryptic info with a number? If you do provide the content of this alert.
Also which Acrobat version (including minor) are you using?

I always get an error during the process of the lastest itunes update on my windows 7 64 bit laptop, i have been installing the correct version for my laptop.

Similar Messages

Maybe you are looking for