I always get "general error" when I change value of "Digitizer"

I tried to capture a Prores422 project by FCP6 and Kano3 card.
I changed setting of "Capture Preset Editor" to ensure capture what I needed.
I think parameter value of "Digitizer" will determine Bit Depth of the project.
The original value of "Digitizer" is "AJA 8-bit Digitizer". If I selected "AJA 10-bit Digitizer",it will pop up generel error.
If I re-select the value to "AJA 8-bit Digitizer", it will still pop up general error.
Please give me a hand.
Is bit depth (8bit or 10bit) is determined by the setting of "Digitizer"?
If yes, why does it always pop up general error when I changed it.

From the information available it appears that your install could be conflicting with a previous version or installation. I would recommend reviewing your installation logs to verify the root cause of your difficulties. You can find directions on how to review your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Similar Messages

I always get an ERROR when I import avi videos in After Effects !!

Hi There
As I said in the title ,,
I always get an error when I import an (avi) video into After Effects CS5.5 ,,
and I don't Know why ,
in other hand I can open the same video I imported it in many media programs like : Windows Media Player-Quike Time-Windows Media Center- Real Player ,, except After Effect !
Although the same Program I used before Formatting the computer ,, but after Formatting the Projects file for Adobe After Effect didn't Open as well !!
The Picture I attached shows the Error ,,
Note:
the question marks in the pictures are for the Arabic name of the avi video ,,and this version of Adobe After Effect CS5.5 is trail ,,
I hope to find a solution for my problem ,,
and I'll Be Thankful

It worked , both what you said worked ,,
First I placed them on the desktop ,
Second I changed the names of the videos ,,
and both of them worked ,,
thanks a lot for your help ,
Mr. TimeRemapper & Mr. Mylenium
have a good day

I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

May depend on which version of iPhoto you have installed.
Check out this thread > https://discussions.apple.com/message/15324917#15324917

HT201210 my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod

my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod.

You can try putting the iPod into DFU mode and see if that will let you restore and remove the jailbreak:
http://www.iclarified.com/entry/index.php?enid=1034
Some jailbreaks cannot be removed and in some cases will permanently disable your iPod. If that happens to you, then you will have to buy a new iPod; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPod.
You're on your own from here. We can provide no further help with a jailbroken iPod in these forums.
Good luck.

Getting general error when saving site using "create PDF from"

I'm using Adobe Acrobat Professional 8.0.0 for Mac, trying to save websites. This started working fine, but I had to shut down in the middle of a site being saved. Now when I try to save a site using Web Capture/create PDF from I get a "general error, nothing was saved". What do I need to do, remove, replace, reinstall or whatever to get this feature working again?
Also can anyone tell me how to set the feature that saves web pages with the headers and footers showing date, time, URL, page title, etc. I often use the print feature (save to PDF) and up until a day or so ago it always saved with those headers and footers. Now they're missing, which is what prompted me to try saving entire sites, above. I remember setting these a long time ago and being able to choose what went on the left, right,header and footer, but I cannot find those settings now.
Thanks,
Michele

Well, after downloading Applejack, I am completely confused. I'm not sure I understand what will happen if I do any of these steps: see 3a.. "clean out all cache files including the Launch Services database and any cached User Pictures". What kinds of things will I lose? Can I choose only the Acrobat cache files? I don't want to have to spend hours or days resetting things as I'm in the middle of a project with a close deadline. I also don't really understand fully what will happen with all the other things they discuss. The instructions say (I just copied and pasted these):
3. Auto mode: You can let the script run through its tasks automatically by typing 'applejack auto'. If you want the machine to automatically restart at the end of its tasks, use 'applejack auto restart'. You can also tell the computer to shut down automatically at the end by using the command line 'applejack auto shutdown'.
3a. Deep Auto mode: If you want to let AppleJack clean out all cache files, including the Launch Services database and any cached User Pictures, use 'applejack AUTO' instead. Use this if you still have problems booting after running AppleJack already.
4. Interactive mode: To run through just one task, or to run the script manually, type 'applejack' and then choose tasks from the menu. Running the script in interactive mode has the benefit of giving you options for working with user level cache and preference files, not just the default system level caches and preferences. To select an option, type the highlighted number or letter associated with the action, and then hit return. Whenever you enter a choice in AppleJack, you will need to hit return for that choice to take effect.
4. Corrupted preference files are moved into a directory that will mirror the original preference directory, with (Corrupt) added to the directory name. For example, corrupt preferences files found in ~/Library/Preferences will be moved to ~/Library/Preferences (Corrupt). After running AppleJack, you'll probably want to take a look at them (and most likely throw out those folders). As of version 1.4.2, AppleJack now creates a copy of the directory tree inside the (Corrupt) folder so that if any files were deeply nested inside the original preference folder, they will be placed in an identical directory hierarchy in the new (Corrupt) folder. This way, if for any reason you would want to move a preference file back, you know where it should go.
6. AppleJack has a primitive logging mechanism. It writes a journal of most of its activity to /var/log/AppleJack.log. AppleJack will automatically reset the log the next time you run it, if the file should ever reach a size somewhat over 500k.

HELP ME!!! I always get an error when clicking the activation link!!!!

Hi, friends,
please help me
I got the email containing the activation code, when I follow the instructions, by clicking the activation link in the email, logining with my AppleID, I got an error:
We are unable to process your request.
Please go back to the previous page, or quit your browser and try your request again.
If you require assistance, please contact ADC support.
I tried both in IE7(windows) and Safari(Mac), neither can work, always get the same error.
What is that? Can anybody help me? I have posted message to Apple Contact, but no response by now,
I need fix this ASAP!!, Is the error from my side or from the apple side? thanks

I would recommend calling them directly: http://developer.apple.com/contact/phone.html

I get "General Error" when trying to playback unrendered video, and when trying to export to my desktop and I'm not sure why.

I import video footage into Final Cut Pro 7, added some effects like motion blur and colour correction, and cannot playback the video whilst it is not rendered. I click the play button but it just says "general error". This also happens when trying to export to my desktop "general error" once again. Does anyone know what is going on?
My RT settings are:
Safe RT or Unlimited RT (I get the error on either setting)
Framerate & video quality - Dynamic
27" iMac i7 @ 3.4GHz
4GB Ram
2GB Radeon 6970m

Hmmmm it seems to be just that file. The rest of my files are fine. I tweaked some settings and tried other files and it worked, so maybe it was just me, I am very new to Final Cut after all. Turns out I'm OK now! Thanks anyway!

Always get an error when trying to record an action

I record the steps in an action, but when I try to run it, I get an error dialog with the following message: Check the actionʼs properties and try running the workflow again. What does this mean?

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I always get this error when I try to install the Trial of 'Adobe CS6 Design and Web Premium'

Exit Code: 15
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW051 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 0 warning(s)
ERROR: DW051: Dependency of session payload {1E621A15-CD9F-4543-B3F6-8032B3647A6A} Standard Adobe Flash CS6_AdobeFlash12.0-en_USLanguagePack 12.0 has changed.
ERROR: DW051: Dependency of session payload {4482EF4A-376B-46DE-9B17-E377232328E0} CoreTech PDF Settings CS6 11.0 has changed.
ERROR: DW051: Dependency of session payload {4FAB339E-2132-434F-9376-9CD735E4C69C} Standard Adobe Flash CS6 12.0 has changed.
ERROR: DW051: Dependency of session payload {50F5A7C9-1E43-4860-AED8-7F8722691F17} CoreTech Adobe ExtendScript Toolkit CS6 3.8.0 has changed.
ERROR: DW051: Dependency of session payload {83463106-DD1C-4FE5-A61C-DF6715472AD4} Creative Suites Adobe Extension Manager CS6 6.0 has changed.
ERROR: DW051: Dependency of session payload {97BA0109-F6BE-4F50-8904-C19442D7216E} CoreTech Adobe Bridge CS6 5.0 has changed.
ERROR: DW051: Dependency of session payload {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} Adobe Web Suite CS6 Adobe Media Encoder CS6 6 has changed.
ERROR: DW051: Dependency of session payload {CFC3110A-491C-4DBF-A97D-66C567600A2F} Shared Technology Photoshop Camera Raw 7 7.0 has changed.
Anyone who can help? I am using Mac OS 10.8.2 (Mountain Lion). Thanks.

From the information available it appears that your install could be conflicting with a previous version or installation. I would recommend reviewing your installation logs to verify the root cause of your difficulties. You can find directions on how to review your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Always getting syntax error when using RANK formula. Please help!!

i am desperate! tried EVERYTHING. so as a last try, I tested the very same Example that Apple gives to elaborate how the "RANK" formula works...and you guessed it....NOT WORKING.
not even a reconstruction 1 to 1 of the apple example worked, giving me a syntax error.
thus i am assuming that i am doing something wrong on a very basic level i would have never thought of (maybe a setting i have wrong?, maybe if you have blue as background formulas don't work?).
i would be sooooo grateful for any help!!!

Thank you very much for answering this quickly.
but unfortunately it doesnt work
i made some screenshots, maybe this way someone sees a maybe obvious mistake i am making
and
Message was edited by: Apolloss

Why do I Always Get this error when I come to this page? I get others similar on other pages WHY??

innerHTML is null or not an object post!input.jspa LineL1599
Code:0 Cha:2
URI:http//forums.adobe.com/post!input.jspa?
containerType=14&container=4748
These messages (error) make me a bit crazy ... what can I do about them?

It appears you are having problems posting to the forum? Which web browser are you using? What other web browser have you tried?

I keep getting an error when trying to install Java for OS X 2014-001

I was trying to download this because I was getting errors when trying open some applications saying you need Java 6 and it directed me to the download link for this but it always gets and error when installing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ install.log
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. Don't post more than is requested.
☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
☞ Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

I get an error when installing Call To Call

I always get this error when installing the Skype Call To Call toolbar:
"The installer has encountered an unexpected error installing this package,this may indicate a problem with this package.The Error code is 2738"
Help anyone?

Just in case, even though it's for a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

General Error when I try to out put DVD in Encore CS4

I have been trying to output a dvd from and encore project and am continually getting errors. I have imported mpg movie assets. I am working on Encore CS4 Windows XP. I get "General Error" message.
I have also tried other file formats like AVI and still got "Transcoding Failed"errors with the transcoding process, not one of the settings in Transcoding was working, that was when I went to mpg files, those are already dvd ready assets no transcoding necessary.
Any Help would be greatly appreciated.
Thank you

Thank you for responding.
I am on system Windows XP
Service Pack 3
I7 Processor
2.8 GHz, 3 GB Ram
HDD
Using 103 GB
Free Space 828 GB
Encore Project:
Simple Menu with 2 navigation buttons linked to two assets on seperate timelines.
The Assets:
mpg file Duration 0:36:40 File size 1.6 GB
mpg file Duration 0:38:47 File Size 1.8 GB
I just imported the assets as timelines, there are no chapter markers for navigation nor no editing on the timelines, I just want to output to DVD and I'm getting "General Error" When I start to build.
file fits on 4.7 DVD
DVD Transcode Settings are at "Don't Transcode"
DVD Transcode Status are at "Don't Transcode"
Hope that covers it, thank you so much for your help

I get this error when trying to run iCloud- Error: 0x80040604: Up/POST:Conflicts

Why do I always get this error when trying to upload Outlook data to iCloud (Win 7 & Outlook 2007) Error: 0x80040604: Up/POST:Conflicts???
I have deleted an reinstalled iCloud and still can't get past the error.

have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG

I always get "general error" when I change value of "Digitizer"

Similar Messages

Maybe you are looking for