I am a 4s user with Vodafone

I upgraded my Iphone 4s to the very latest firmware with dire consequences. I have a 4 bar signal with Vodafone but I cant make or recieve calls. I called Vodafone on my landline and spen an hour talking to all sorts of people repeating myself countless numbers of times
Botom line was they asked me to master reset the phone, disconect from vodafone, reconnect to vodafone and then everything would be fine Well it was for on call thereafter I had to go through the process each time I wanted to make a call
I wanted to back track the phones firmware but couldnt seem to find a legitimate way to do it ( Does anyone have an idea about this ? ) Finally and in total desperation I turned off 3G on the 4s and hey presto my phone now works for outgoing and incoming calls. Question is this fault caused by Vodafone or is this a problem solely caused by Apple
Many thanks for any guidance you can give me

This sounds more like a camer problem than an iPhoto one. Are the photos with the dark corners photos that were taken at maximum zoom on your camera?
OT

Similar Messages

I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

Keep on talking to Vodafone and keep pestering them until you get a satisfactory answer. Whether you get a 3G signal or not, is entirely the responsibility of Vodafone India because they are your carrier/phone company and nobody here can help you with that on a public user to user technical support forum.
Contact Vodafone as they are the only ones who can help you.

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error in SRM: a user with enough authorisation level is miss

Hello,
We are on SRM 5.0 and our users get the following error in SRM when creating a shopping cart:
No user assigned to object a user with enough authorisation level is missing.
Anybody any idea ?
Thanks as ever

Hello Can anybody helpe me please ?

Provisioning a user with a resource automatically doesn't work!!

Hi Experts – IHAC trying to configure OIM to provisioning a user with a resource automatically (via OID connector).
As reviewed, the membership rules (rules designer) and access policies already configured with correct param. So I would say everything should work fine.
But when they create a new user with proper attribute. The resource didn’t perform an automate process as expected.
In the log file show only 2 lines of error message.
<Apr 25, 2013 2:49:46 PM ICT> <Warning> <oracle.iam.callbacks.common> <IAM-2030146> <[CALLBACKMSG] Are applicable policies present for this async eventhandler ? : false>
<Apr 25, 2013 2:49:47 PM ICT> <Warning> <oracle.iam.callbacks.common> <IAM-2030146> <[CALLBACKMSG] Are applicable policies present for this async eventhandler ? : false>
However, manual add resource works well.
Environment Info:
- OIM 11gR1 (BP6)
- OID Connector 9.1
- AIX 7.1
Is this consider as bug on AIX platform ? Or any inputs would appreciated.

Just check if the rule satisfy, user is getting the role.
--Hari

Connect to a cube with Integrated WIndows Sercurity for Windows user with computer outside the domain

Hello,I am trying to connect to an MSSAS cube with a windows user ( and i need this user to be the end user that connect to the cube) from outside the domain.It will be .Net application.I use msmdpump.dll before but the thing is it impersonate the connection
so the user that connect to the Cube is not the real client user with is a problem for me because i like to manage the security throw roles.
SSRS is able to do what i am trying to achieve ( it ask you your domain user and password) then connect to the cube with these credential which is great,but i do that ?
With ADOMD.Net how do you provide windows user/password in the connection string ?
I tryed to only active windows security access with IIS and MSSAS but it's not working with a computer outside the domain even if in excel i provide a windows user/password.
Vincent

With ADOMD.Net how do you provide windows user/password in the connection string ?
Hello Vincent,
See MSDN Connection String Properties (Analysis Services) for all available properties; addtitional: AdomdConnection.ConnectionString
Property =>
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to provide the user with a list of files to pick from...for downloading

hai..
I have uploaded the file succesfully.. now we need to download the file...... which has been uploaded..... for that we have implemnted the Query as..
select max(id) from APEX_APPLICATION_FILES ,here the latest uploaded record will be retrieved and shown.
Now We want to provide the user with a list of files to pick from for downloading..,Dat is he should be shown the list of files which is available from dat he has to select one file to downlaod ???
can u plz tell me how to do it....
anoo

Hi Anoo,
Create a report using the following SQL statement:
SELECT ID,
FILENAME,
CREATED_ON
FROM APEX_APPLICATION_FILES
ORDER BY CREATED_ON DESCThere are other fields available from the table, but the above gives you a start.
Then edit the report's Report Attributes.
Edit the CREATED_ON column and pick a Number/Date Format to use for the display and Apply Changes
Edit the ID column. In the Column Link section, enter:
Link Text: <img src="#IMAGE_PREFIX#download.gif" alt="Download">
Target: URL
URL: p?n=#ID#
Apply Changes and run your report
Andy

Site Login Behavior For SharePoint Foundation 2013 Users With Expired Passwords?

What are the most user-friendly ways of getting external users with expired AD passwords back into the SharePoint site with a new working password?
We already send automated email notifications to users reminding them to change their soon-to-expire passwords. However, sometimes they miss seeing the email notifications before the password expires (such as after returning from vacation or just carelessness
and lack of attention to email messages) or they see the warning messages and forget to act on it.
When this happens and they try to log into the SharePoint site from the Internet, their login fails without telling the user the reason they can't log in is because their password expired. So, they end up confused and call the help desk to get their
password reset.
Is there a way to set up SharePoint Foundation 2013 login in a similar way to the OWA login so that, when a user with a correct but expired password tries to log in, it gives them a prompt to set a new password right there rather than just an error indicating
their login failed for unknown reasons or password is "incorrect?"

It could be done. You get a different event log entry for an expired login attempt than for a wrong password, 4625 events denote a login failure and an error ID of 23 denotes a logon failure.
A naff, but simple, approach would be to create a tool that checks your server logon event log for 4625 entries and then emails that user, or the help desk, or security, that they're trying to get onto your system with expired credentials.
For a more polished experience you've got a lot more work and bluntly it's going to be impractical for you. You'd have to re-write sections of the SharePoint authentication process or intercept the process, both are risky and not a good idea to try.
There's a really interesting paper here that might be of interest, it won't help you in your current situation but it might shed more light on the overall authentication/authorisation process.
http://www.sans.org/reading-room/whitepapers/forensics/windows-logon-forensics-34132

Can the Terminal add a user(with all options) on a single line?

Howdy All,
Can the Mac Terminal add a user, with all options desired, on a single line?    If so, can I get an example of this single terminal line to work from?
Thanks

Thanks Drew!   You have some great thoughts there. Perhaps I should provide a clearer environment of each high school(4). All classrooms have a lock down Windows environment. (There are no Macs any where in any classrooms.) The mini-tower will be the only Mac on each high school campus. we're in Dell country. The desktops are locked in such a way that only the ghosted/installed software on each hard drive works and no other software can be installed. USB sticks can't run any exe, jar, or other executable file. Even the other drives on the network can't run them. This has been setup to prevent students from bringing games into the environment and running them. Only the single classroom in each high school, where Web Tech is taught, has a ftp tool installed. Students cannot bring and use their own laptops either. So there really isn't any stray ftp activity happening. You cannot "ftp" out of the network! And there is only the one Mac available per campus. All this makes it certainly easier to maintain for sure. I am the only user in the school district they let run a personal laptop...mine has Ubuntu (tweaked). My knowledge of Linux has led them to assign this project to me. They are MS based entirely and so is their knowledge base.
I've got to teach the other 4 teachers how to manage the mini-tower. Basically it is this:
     Start and stop Apache2,
     Start and stop vsftp,
     Add ftp users(students will only have directory:           /Library/Server/Web/Data/Sites/Default/studentlastname.firstname ) Students will not log on to the min-   tower directly as any normal user would, but only through ftp. (I.E. no /home directory) ,
     Remove/delete students as needed
     (I'll pre-install cgi-bin scripts on these to keep it simpler on the other teachers and myself.)
With this in mind, you can see why a basic script or single command line to install these students would be great! I want to keep it simple to avoid mistakes the teachers might make adding users. Once I understand adding a user (in a terminal) better on a Mac, I may write a script to make it happen for them.
I'd also like to understand removing/deleting a student/user better to insure everything is gone when executed.
I hope this clear things up. Any help is much appreciated.    THANKS!!!

User with 2 permissions assigned via groups, not able to utilize the higher privilege

User has been assigned Publishing Editor, this was assigned by being a member of a group, where group's permission is publishing editor.
In addition, the user has been assigned Reviewer, this also was assigned by being a member of a group, where group's permission is Reviewer.
The issue: The user can only perform functions related to the Reviewer role, and can't perform functions available via the Publishing Editor.
Any Ideas what is going on?
*Removing the user from the Reviewer group is not an option.

Hi,
The easiest way is to grant the single user Publishing Editor permission of that folder directly, check if the issue persists.
Right click on the folder, Properties -> Permissions -> Add the user with Publishing Editor permission.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

Can you have two different users with itune accounts on the same computer?

Can you have two different users with separate itune accounts on the same Ipad?

Yes, create another user profile on the computer and each user can log into their own profile that way.

Why can't I have 2 users with 2 different apple ID's on my iMac

Just bought a new iMac, I have set up 2 user accounts, one for myself the other for my Fiance. We both have different apple ID's yet we can't both download our purchases. As he has already downloaded his old purchases on to the new Mac, when I try, it brings up the box saying that "this computer is already associated with another apple ID, therefore it can't be used with my ID for another 90 days"
I have tried to get Apple Support to help me out but they just pushed me down the route of Home Share, this isn't working as the laptop with all the music on, isn't always turned on.
Does anyone know how to solve my problem? Apple say that it can be done, yet 3 live chats, 2 phone calls and many hours later and I still can't access my purchased items, surely the iMac should be able to have multiple users with multiple apple ID's???
Please help!!

No, once the initial 90 days has passed, you should both be able to download. My husband and I share an iTunes library, and to the best of my knowledge, we do not have issues with both of us being able to download.
I'll double-check it tonight when he gets home, but I'm fairly certain we are now both able to do it.
I'll post back once I've tested it.
Cheers,
GB

I am a 4s user with Vodafone

Similar Messages

Maybe you are looking for