I AM A NOVICE...
please some one tell me what drive I need to replace the maxtor hard drive in my emac, and perhaps gain better performance.
ps: a number would be nice...
1 what kind of drive is it? System Profiler will provide type and model number info. From that, speed info can be obtained.
2 how much disk space do you want? larger drives tend to be faster.
3 what's your budget? Fast drives are expensive. Large fast drives are even more expensive.
4 what do you want to do? If all you want is to have space to store data, a large FireWire external drive would suit you better than an internal drive.
5 who's going to install the drive, if you go with an internal drive? Does this person have experience with hardware in general and hardware containing large colour CRTs with 25,000 volts on them in particular? (Hint: eMacs have such a CRT.)
You can get bare Hitachi 250GB ATA drives for US$100-130. Other vendors may have similar prices.
Similar Messages
-
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hey I'm a novice on computers but i've just done a full system restore on my laptop and put it back to factory spec, obviously i backed up all the data on an external hard-drive but when i have re-installed itunes and gone to import all my old music files from my previous itunes library as mpeg4 files it keeps telling me i don't have permission??!! *** someone please explain or tell me how to get music on to my new itunes without having to re-import every cd i own which is alot!!!
Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.
-
I am at a loss. even after reading other questions and responses. After upgrading to Mt. Lion, everything on my iMac slowed down. I knew more memory would be needed, so I went from 2G to 6G. That worked for awhile, but now, about 3 weeks later, things are slowing down again. Mail is especially slow, when moving from one message to another, and also just plain typing is delayed in mail. iPhoto has had the spinning wheel issue since change to Mt. Lion, but it eventually stops and the app itself is functional, so this is just annoying as much as anything.
Any easy, simple to follow instructions would be appreciated. Is it better for a novice to take to the Genius Bar or to an approved Mac repair center in my area, rather than attempt some of the solutions I've seen offered here. And, if I do, what's the likelihood the issues will be resolvable?? Clearly, I am not the only one with this issue ...
Thanks for any help you can offer.There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
Yes Im a lot of a novice so be patient with me lol I am trying to put a 2006 Edition of a weight programme on my laptop, but when I down load it it just comes up in weird script and says cannot operate in Dos mode can anyone help.
ThanksWelcome to Apple Support Communities.
Sounds like you have a program designed to run on Microsoft Windows, or even older (1980's) MS-DOS, rather than Mac OS X. If you have Windows on your Mac installed via Boot Camp, try booting into Windows first, and then loading the CD. If you don't have Windows, it's probably cheaper to buy a new program designed for Mac than to purchase a copy of Windows (US$120 or more), not even knowing for certain if your old program will run. -
I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'
That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.
-
I have recently bought an Ipad but have forgotten my gmail password that I use on my Mac. I have used this email as my apple ID. If I now set up a new email account on my Ipad, do I have to change my apple ID as well as my apple password! HELP A VERY CONFUSED NOVICE!!!
On your Mac, try to access your gmail account. There should be a link you click for "Forgot My Password". Click it and try to retrieve your password.
Cheers, Tom -
I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what.
The tools are not responding when I try to use them. Some of them work sometimes, but not others and some don't work at all. I'm in a design class online and I need these tools desperately. I have an assignment due Monday and I'm losing the whole weekend because Tech Support is only open M-F!
Any help anyone can give me will be appreciated.
Thanks,
Rose IrelandMaybe these links provide some pertinent information.
Optimize performance | Photoshop CS4, CS5, CS6, CC
Photoshop: Basic Troubleshooting steps to fix most issues -
As obvious novice I want to know how to upgrade my mac mini 10.4 OS X to a more uptodate system
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Machine Name: Mac mini
Machine Model: PowerMac10,1
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.42 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.9f1 -
I want to see movies in my HBO app. I cannot do so because the message keeps coming up that I must take the HTTP off in my wi-fi settings. I do not know how to find this in those settings. I am a novice at this whole thing, so be patient with my ignorance with techie things.
There is no HTTP in WiFi settings. Are you talking about an HTTP Proxy server? If so, this may mean that the HBO App does not work correctly if you are using a Proxy server for your internet connection. To see if you are using a proxy go to Settings > Wifi and touch the blue ">" to the right of your network name. This will bring up the network connection details. At the bottom will be information about any Proxy server that you are using.
What exactly is the error message? -
I use iMac, iPad and iPhone but also an HP laptop. I have used Macs since 1986 so I am not a novice. I set up my iCloud account, moving from MobileMe recently and everything works fine on my Apple devices. The bizarre thing is I can see all my e-mail accounts via iCloud in Outlook but the contacts and calendars are not syncing in Outlook even though the original calendar material came from Outlook (the contacts data is all from the iMac). I've tried all the obvious things and read most of the articles on the Apple Support website. All the relevant boxes are checked on the iCloud dashboard on each device but I just wondered if I was missing something obvious. I'm sure some of you will have had the same expereince and solved it. Can you help me?
Thanks in anticipation!
TI use iMac, iPad and iPhone but also an HP laptop. I have used Macs since 1986 so I am not a novice. I set up my iCloud account, moving from MobileMe recently and everything works fine on my Apple devices. The bizarre thing is I can see all my e-mail accounts via iCloud in Outlook but the contacts and calendars are not syncing in Outlook even though the original calendar material came from Outlook (the contacts data is all from the iMac). I've tried all the obvious things and read most of the articles on the Apple Support website. All the relevant boxes are checked on the iCloud dashboard on each device but I just wondered if I was missing something obvious. I'm sure some of you will have had the same expereince and solved it. Can you help me?
Thanks in anticipation!
T -
I had the 3.3 update window with Aperature pop up and say that I could no longer work with my library until updating Aperature. The update froze up about 90% through the completion of the last set(9 of 9/ 90% complete) and ran over night. My MAC shows version 3.3 installed. When I try to open Aperature, I get a system crash error. I am a novice at best when working with software and I am panicing because of the amount of pictures that I have on the system. I do back them up but do not know how to restore Aperature software(I purchased it before the app store and can not find it). Please advise.
There is an Aperture forum that you can repost in, that is where you will find the guru's for that product. Simply click: Aperture to get there. BTW before you do please complete your profile, it makes it much easier for those attempting to assist you. You can find instructions by clicking Profile Update
-
How to loop a script... (novice in over head?!)
At the core of it I want to be able to change the filelink from a tif extension to an ai extension if the appropriate file exists. I can do this through a contrived search and replace on the IDML files but it scares the people who work on the files... so I'm left coming up with an InDesign script which mimics this sort of workflow. One of the InDesign scripting references I purcahsed 'InDesign CS5 Automation Using XML and Javascript' by Grant Gamble has a great script for accomplishing this. However the script is written with a single file input in mind and I'd like to extend it to handle a list of files defined by the user.
I've tried with my sub-novice skills to loop it and I end up with a bunch of null object garble. I've managed to modify to the point where it will open up the next document in the 'files' list but InDesign doesn't seem to reckognize its existence for lack of a better term. At the end of the day I might be in over my head, I've struggled with this for too long so at this point I'm hoping someone can help me along and I can backtrack how their solution worked! I feel that this type of solution would help to evolve my understanding of Functions and variable scope.
I'm likely in need of a paradigm shift! In a perfect world I would like to be able to:
myFolder = selectDialog();
files = myFolder.length;
for(i=0; i<files.length; i++){
app.open(files[i])
Run("other script")
app.activeDocument.close(SaveOptions.YES)
Here's the "other script":
// Example
var g = {};
main();
g = null;
function main(){
if(app.documents.length == 0){
alert("Please open the g.document containing the images to be relinked.");
else{
intResult = buildDialog();
if(intResult == 1){
relinkGraphics();
function buildDialog(){
g.doc = app.activeDocument;
g.win = new Window("dialog", "Re-link Images");
g.win.add("statictext", undefined, "Choose file extension or enter text:");
var arrExtensions = [".ai", ".bmp", ".eps", ".gif", ".jpg", ".png", ".psd", ".tif"];
// From panel
g.win.pnlFrom = g.win.add("panel", undefined, "Find:");
g.win.pnlFrom.ddl = g.win.pnlFrom.add("dropdownlist", undefined, arrExtensions);
g.win.pnlFrom.txt = g.win.pnlFrom.add("edittext");
g.win.pnlFrom.txt.minimumSize = [200, 20];
g.win.pnlFrom.ddl.onChange = function(){
if(this.selection != null){g.win.pnlFrom.txt.text = this.selection.text;}
// To panel
g.win.pnlTo = g.win.add("panel", undefined, "Change to:");
g.win.pnlTo.ddl = g.win.pnlTo.add("dropdownlist", undefined, arrExtensions);
g.win.pnlTo.txt = g.win.pnlTo.add("edittext");
g.win.pnlTo.txt.minimumSize = [200, 20];
g.win.pnlTo.ddl.onChange = function(){
if(this.selection != null){g.win.pnlTo.txt.text = this.selection.text;}
// Add button
g.win.btnAdd = g.win.add("button", undefined, "Add");
g.win.btnAdd.onClick = updateListBox;
// Criteria list box
g.win.lstChanges = g.win.add("listbox", undefined, undefined,
{numberOfColumns: 2,
showHeaders: true,
columnTitles: ['Find:', 'Change to:'],
columnWidths: [100, 100]
g.win.lstChanges.minimumSize = [200, 100];
// Delete button
g.win.btnDelete = g.win.add("button", undefined, "Delete Selected");
g.win.btnDelete.onClick = deleteListItem;
// Manual/Auto radio buttons
g.win.radManual = g.win.add("radiobutton", undefined, "Manual");
g.win.radAuto = g.win.add("radiobutton", undefined, "Automatic");
g.win.radAuto.value = true;
// Relink and Cancel buttons
g.win.btnRelink = g.win.add("button", undefined, "Relink");
g.win.btnRelink.onClick = function(){
if(g.win.lstChanges.items.length == 0){
alert("Please specify the relink criteria.");
else{
g.win.close(1);
g.win.btnCancel = g.win.add("button", undefined, "Cancel");
return g.win.show();
} // End function buildDialog
function updateListBox(){
if(g.win.pnlFrom.txt.text == "" || g.win.pnlTo.txt.text == "" ){
alert("Please enter text in both boxes.");
else{
var itm = g.win.lstChanges.add("item", g.win.pnlFrom.txt.text);
itm .subItems[0].text = g.win.pnlTo.txt.text;
g.win.pnlFrom.txt.text = "";
g.win.pnlTo.txt.text = "";
g.win.pnlFrom.ddl.selection = null;
g.win.pnlTo.ddl.selection = null;
function deleteListItem(){
if(g.win.lstChanges.selection == null){
alert("Please select the item to be deleted");
else{
g.win.lstChanges.remove(g.win.lstChanges.selection);
function relinkGraphics(){
var strFeedback = "";
var blnRelink;
for(i = 0; i < g.doc.allGraphics.length; i ++){
// Exclude embedded items
if(g.doc.allGraphics[i].itemLink == null){
continue;
// Apply all changes specified by user to filepath of graphic
strBefore = g.doc.allGraphics[i].itemLink.filePath.toLowerCase();
currentLink = g.doc.allGraphics[i].itemLink.filePath.toLowerCase();
for(j = 0; j < g.win.lstChanges.items.length; j++){
currentFind = g.win.lstChanges.items[j].text.toLowerCase();
currentChange = g.win.lstChanges.items[j].subItems[0].text.toLowerCase();
currentLink = currentLink.replace(currentFind, currentChange);
// Relink image if applicable
blnRelink = false;
if(strBefore != currentLink){
blnRelink = true;
if(g.win.radManual.value == true){
app.select(g.doc.allGraphics[i].parent);
blnRelink = confirm("Relink this image?");
if(blnRelink == true){
try{
g.doc.allGraphics[i].itemLink.relink(File(currentLink));
strFeedback += "Relinked: " + strBefore + " ->\nto: " + currentLink + "\n\n";
catch(err){
strFeedback += "Could not relink: " + strBefore + "\n-> to: " + currentLink + "\n\n";
// Display user feedback
if(strFeedback == ""){
alert("No images were relinked.");
else{
var fleFeedback = File(app.activeScript.parent + "/relink-log.txt");
try{
fleFeedback.open("w");
fleFeedback.write(strFeedback);
fleFeedback.close();
fleFeedback.execute();
catch(err){
alert("Sorry. Due to an error, the log file could not be created.");
Any and all help is greatly appreciated,The full script runs on "the active document", and it's possible that is the point where ID gets confused. Can you re-write it as a function with *one* parameter -- the document to work on?
Then you can do your loopy (sorry) looping like this:
someDoc = app.open(files[i]);
Run("other script", someDoc);
someDoc.close(SaveOptions.YES);
"app.open" returns a handle to the ID document once it's opened, and if you save it into a variable you can use this wherever you are using "app.activeDocument" now. -
As a novice computer user, I wonder why I'm often getting "white-out" (program/app/site I'm working in goes totally blank onscreen). This is when I'm Internet online. If it makes a difference, I'm working 99% of the time on battery, not AC, power. Some of the possibilities I'm guessing are: glitches in my Verizon FiOS Wi-Fi providership?; staying too long on a site that's waiting for me to finish and "Submit"?; computer hardware prob (yikes, I hope not! It's brand new). Any ideas out there?
When this 'white-out' occurs, is the display 100% white with no error message and no menu bar?
Does this occur when you are using Wi Fi or connected to the Internet via the Ethernet cable?
Ciao. -
hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?
See if this helps
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch -
I have a Apple imax only about 9 months old. I need a new printer. I am looking at a Canon MX926 PIXMA. Do I have Airprint or do I need to purchase it? I am a novice with Apple and any assistance would be greatly appreciated.
Welcome to Apple Support Communities
If your iMac is only 9 months old, it probably comes with OS X Mountain Lion, and it includes AirPrint, so you do not need to purchase anything else apart from the printer (which is compatible with AirPrint).
Once you have purchased the printer, you need to follow the steps of the manufacturer. To add the printer to OS X, see > http://support.apple.com/kb/HT4670
Maybe you are looking for
-
Single Click on a Row in ALV Grid
Hello, I am using 'CL_GUI_ALV_GRID' class for displaying an ALV grid. The requirement is when an user clicks on a row of the grid, a popup should be displayed with the details of that line, the user can edit/enter some fields there and when clicks on
-
How to limit the rows in the item level in sales order
hi i have created a sales order here my requirement is in item level there are so many line items i want to limit the line items to 5 num is it possible
-
Has anyone successfully built a Universe against a Baan database? We are looking at the possibility either using a Baan driver for Universe Designer (if this exists) or connecting to the Oracle system underneath. Any help is much appreciated! Thx Ja
-
Message: MZCommerce.BadPasswordToken_message HELP!
Hi, If anyone can help, I am getting the message: MZCommerce.BadPasswordToken_message whenever I try to purchase anything from the US iTunes Store. I can't access my account summary or purchase anything because of this message. Please can someone tel
-
Well as I understand it from our Customer Support team IE8 is now available from MIcrosoft Update site and may well become part of the Automatic Update pack very very soon. As an ORACLE Financials Support Analyst, I am receiving an increasing number