I am able to print interest but it is not posted

Hi
I am able to see interest printed but it is not posted
i used both F.2a and F.2c
i will assign points for useful answers
regards
prasad

Hi,
     Need to check below whether its genarated batch input session or not when u execute the Intrest calculation report please check below other wise it will show error log.Let me know if you need any further details.
Regards,
Satya

Similar Messages

  • HT4101 I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to down photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please.

    I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?

    The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
    Another way to transfer. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom
    Look at this link for convertion the .mod format.
    http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
    Message was edited by: Texas Mac Man

  • Acrobat Pro 9 - Chose Greyscale in print properties, but it is not changing it to greyscale

    Acrobat Pro 9 - Chose Greyscale in print properties, but it is not changing it to greyscale.  I tried to go through all the settings, but I cannot figure it out.  I am printing a color PDF document to a greyscale document.
    Not sure if I am in the correct community group.

    thank you for this post.  It still works and is a required "fix" as of Oct 2010.
    Somehow, in my network adapters, a wireless adapter called Microsoft Virtual WiFi Miniport Adapter was there (this may have something to do with the virtualization abilities of Windows 7). Anyway, I disabled that by going to
    Network and Sharing Centre -
    Change Adapter Settings, and then
    right clicking on it and
    choosing disabled.
    Next thing I knew Adobe Updater was checking away merrily.

  • Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
    Paul

  • I was able to download lightroom but Photoshop will not download . I have tried all day .I paid  for the year in advance and would like to use it.

    I  paid in advance for a year of  photoshop and was able to download lightroom but the photoshop will not download .Any sugessions?

    Sheilag44930607 do you receive any specific error messages when you try to install Photoshop?  What version of Photoshop are you installing?  Finally what operating system are you using?

  • Posting run is successful but document is not posted

    Hi Experts,
    I am able to run the Payroll results posting run (PC00_M99_CIPE) successfully and released. But when I check the status im getting the below Error.
    "Document was not posted to accounting.
    Message No 3G098."
    Kindly let me know, what is the required configuration to post the document to accounting.
    Regards
    Raveendra.

    Hi Ravendra,
    You might have forgot to post the document...
    First Document has to be released (Which you did)
    Next you have to post the document...  (Which is pending from your side)...
    Tcode :- PCP0
    look out for your document which is released .. You need to post it ...
    Regards,
    Veeram

  • Is it possible to use a tax code in FB60 but which does not post any tax?

    Hello Gurus,
    Can you advise if it is possible to configure a tax code which can be selected in FB60. But we want this tax code not to post any tax value in SAP but simply to be allowed to be selected and populated in the doucment. In FTXP a tax code can be setup that does not need to have a tax rate % maintained against it or be linked to a GL account. However, this tax code cannot then be used in FB60 as the system asks that a rate is maintained and then that an account must be maintained.
    Can you advise if it is possible to maintain a tax code in such a way that it can be selected in FB60 but does not result in any tax posting to any tax account? We want it so that no value is posted, so even a 0% rate would not be good.
    Thanks for any ideas on this.
    Mart

    If you set up 0% tax code, system will NOT post any entry to GL account. You can use the tax code in FB60 & MIRO & PO too.
    thanx

  • I composed an e-mail and sent but it has not posted as sent nor is it showing in my out going box.  Where do I find it and has it been sent?

    I composed an e-mail and thought it was sent.  It is not posting in my out box nor my sent mail.  I have retyped and sent two follow up cpies and none have been delivered and seem to be lost.

    thanks,but not showing in sent, not showing in out box, and not showing in drafts.  Its really disappeared, not just once but twice to the same person, different e-mails.  I did have a weak connection and it held on sending for a while before going to can not down load mail, usually unsent mail will be held in the out box

  • I can no longer print using wifi. I have to connect a USB cable to print. Setup and pref show that I should be able to print wireless but I keep getting printer not found msg when trying.

    I can no longer print via wifi. I could at one time but now I have to connect to printer with USB. All settings appear correct in printer and macbook. Sys pref shows printer with green light next to idle. Sending a print prompt results in "searching for printer, printer not found, ensure printer is turned on". I have reinstalled printer in my print list and reinstalled printer software on macbook. Kodak 5250 AiO printer shows it's configured for and on wifi channel. I go online with laptop using wireless but cannot print. Help!

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

    We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • WAS ABLE TO PRINT PHOTO BUT NO LONGER ABLE

    OUR AGENCY IN THE PAST TO PRINT PHOTOS WE NEED TO PURCHSE PHOTO SHOP FOR MY PERSONAL COMPUTOR

    You are not addressing Adobe here, Ray.  We are all users like you in these user to user forums.
    Use the Adobe Store web page or call them on the phone.
    Good luck.
    Please do not type in all caps.  It's difficult to read that on the screen and it's considered shouting, therefore rude,

  • Smart Web printing loaded but select button not working

    I have used this tool successfully on a previous PC , but I can't get it work on my new one. I have XP and IE 7 installed. I have uninstalled and reinstalled, rebooted and still the same problem. 
    I select button is not converting into the cross bar, can someone fix it for me? - thanks
    This question was solved.
    View Solution.

    I seemed to have fixed my issue, you might want to try this.
    In Internet Explorer select Tools select Manage Add-ons select Enable or Disable Add-ons and besides enabling Show or HIde HP Smart Web Printing, enable HP Smart BHO Class as selecting this last Add-on cured the problem and the button converted to a cross bar

  • Hi im trying to sign up with printer code but i can not find the application

    I just bought the printer and I am trying to set up the eprint Mobile.

    Please read this post then provide some details.
    http://h30434.www3.hp.com/t5/Other-printing-questions/Want-Good-Answers-Ask-Good-Questions/m-p/2094#...
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • I have the print ap but I do not see how to print the calendar on my iPad 2.  Any suggestions

    I have the print ap on my iPad 2.  I can not figure out how to print the monthly calendar pages from my calendar on my iPad 2.  Any suggestions

    What print app do you have? I think that you need certain printing apps in order to print the iPad calendar. The print feature is not built into the app itself ...As far as I know.

  • Idoc Status 53 but Applicaton document not posted message type PORDCR

    Hi,
    Need your help. I am using message type PORDCR and Basic type PORDCR04 to create Purchase order through inbound Idocs. I am getting correct status '53' Application document posted along with the new Purchase order number. When I am trying to see it in EKKO / or ME23N  I could not see this purchase order.
    Can anyone please let me know what could be the possible reason for document is not getting posted in in database but Idoc status is correct.?
    Thanks in advance.
    Regards,
    Deepak

    check SM13 and ST22 to see if there are any errors there

Maybe you are looking for