I am anxious for the 10.2 update...When will it be released?
The 10.2 update has so many wonderful features. The Z10 is a great phone. It needs this update. Then of course, the 10.2.1 update would be even better.
samakm, we want to ease your frustrations. It's our goal to ensure that you have the best wireless experience on your device. Software updates provide patches, which fix software incompatible bugs and improved software performance to make your device more secure and it reduces conflict. Our friends at Blackberry implement these updates and push them directly to your device. We apologize that we have not yet been provided with a date as to when the next update will be released. However, stay tuned here: http://bit.ly/n5snpq
LasinaH_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
As I'm certain many others who bought this phone are, I am increasingly irritated that Verizon has not released the Windows 8.1 update.
When will it be release? Early 2015 is not an acceptable answer."Early 2015" is the best answer you are going to get. I suggest that it is less stressful to accept what is rather than reject it. Taking the stance of "not acceptable" for something like this does nothing but disturb your peace of mind.
Really though, to me it is very good news in the sense that we now know we WILL eventually be getting 8.1, Cyan, and Denim. Verizon has made no official statement at all about this. Now we have Joe Belfiore specifically telling us MS is working with Verizon to get the update out and it will come for the ICON. Not as informative as we would like, but much better than what we had before! -
Nokia Sensor for the N70, N80, N90 - when will it ...
I know this is dicussed in part in other topics but I'd like to start a topic specifically for Nokia Sensor on the N70, N80 and N90 series of phones. Use this topic to plead, beg and otherwise bribe Nokia into getting Nokia Sensor developed and released for this series of phones. Moderators, please can you tell us anything you know about when this application will be available or what it's current development state is. Cheers, Richard.
Hi Richard
As moderators we really don't have access to that kind of information. The best thing to do in this situation is contact Nokia directly.
Regards
Threnody -
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where I am not a network administrator and do not have privliges to reset passwords and turn the routers on and off. Any other suggestions for re-connecting? I have never had a problem before and can still connect to other networks i am a part of...
Try Resetting your iPad: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.
-
How do you delete old music that it don't want anymore for the iOS 7 update. It gave me all the music I deleted in the past. I tried going to settings and turning off music from the past and it got rid of my music I recently purchased.
Hello there, Syd_ma22.
The answer to how to delete a song on your phone in iOS7 is found on page 62 of the iPhone User's Manual:
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Specifically:
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!
Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7. -
I have been backing up my iphone for more than 12 hours for the ios 5 update!!!!!!!!!! help.!!!!!!
i have been backing up my iphone for more than 12 hours for the ios 5 update!!!!!!!!!! help.!!!!!!
It sounds like you're connecting to an iTunes account you've never synced with?
-
Last week I purchase a new MacBook Pro. Do I need to pay for the new OS update?
Last week I purchase a new MacBook Pro. Do I need to pay for the new OS update?
Select your category and you can check with your serial number whether you are eligible or not.
Qualifying purchases between June 06, 2011 and July 20, 2011
http://www.apple.com/macosx/uptodate/ -
I cannot update the iphoto ap on my mac os x because it looks for the ID I used when buying it and I forget the password to that email.
The emails is obsolete so I cannot get the password from the service provider.
I have another Apple ID and password which I use - but it won't let me update the iPhoto I bought with THIS cMacContent and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
Will I have to pay for the OS Lion Update?
So I just recently purchased a 13" Macbook Pro, it arrived yesterday, 5/6. I will be away and won't be able to open and start it up until June 1st.
WWDC is only a few days after I will have had the computer. I'm not very familiar with it, but I assume I register the MBP to my Apple account on startup?
Will I still have to pay for the OS Lion Update, if/when they announce the OS less then a week later?
I could see them, Apple, having a grace period for this kind of thing and just want some opinions...
Thanks!You will have to pay. I doubt you will see Lion until summer.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?
In case you are not aware, Mavericks requires a high speed broadband connection.
In the event you need to restore or repair the starutp disk, OS X Recovery also requires a broadband connection as noted here > About OS X Recovery
You can check your download speed here > Speedtest.net
15Mbps or less, you may not be able to install Mavericks or use OS X Recovery. -
Fix for Thunderbolt OTA firmware update , when receiving an error message
Hi, my name is Lou, and I'm not sure if this is the right place to post a solution or fix for Thunderbolt users that are unable to get their firmware update OTA..
For the last 2 weeks, when i got word that the (OTA) Over The Air firmware update should be coming out, i started going on my phones setting to check for new updates and started to receive an Error message, stating to check back when service was available, well Verizons attempt at fixing the issue was to to a hard factory reset, which didn't work, they also had me go to the local Verizon Wireless store and switch out my SIM card, and that didnt work, and they also tried Forcing the update to y phone, and again No resolve.. There last solution was to send me a refurbished phone, which I am strongly against, cuz I dont want a used piece of equipment, ... well anyways, I found the solution for the fix of getting the update downloaded to your phone, from www.thunderboltforums.com ,
You first need to downlaod an app from the market titled LTE On/Off app, install it. Once installed, I turned of my WiFi on the phone, then opened the LTE On/Off app, and rememer the original setting that its on, bcuz thats the setting u will have to set it at, when your update begins... Select the CDMA mode, not the CDMA(PRL) mode... then exit the app.... By selecting the CDMA mode only, this should make your either 3G or 4G signal switch to a 1X symbol.. then, i restarted my phone, .... i dont think restarting is necessary, but i did it anyways... when it restarted, the signal setting was still at 1X, then I went to setting, aSoftware Update, then Check Now, and within a minute or so, the Download option appeared. once I started the downlaod, I let about a minute pass by, then I went and opened one last time, the LTE On/Off app, and switched the setting to its default setting, and mine was the 4G option and the 4G signal kicked in, and the 78Mb download completed within 3 minutes... hopes this helps... It helped me...I could be wrong but I believe this has been covered but thanks for sharing still...
-
For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
What is the logic for the behavior of LV9 when opening vi references?
I recently started using LV 9 and I can't figure out what the rationale is for the LV 9 behavior when opening references to vis. The way I understand it, LV9 looks up vis using the absolute path on the disk where they came from when opening references, even if they are in memory. If just a vi name is given, LV9 tacks on the path of the referring vi on disk when trying to open the reference. So, as far as I can see, either an application opening references to vis needs to specify absolute paths to the location on disk and be modified whenever a dynamically called vi's location on disk is changed, or a dynamically called vi has to be saved in the same directory as the vi doing the calling or in a rigid and inflexible directory structure.
Example:
I am trying to use a 3rd party library whose vis open a reference to a vi that I create, the name of which is obtained from those in memory using a name pattern. The library vis get the name of the vi I created and try to open a reference to it. Previously this worked because LV looked in memory for "my.vi" when opening the reference but this fails with LV9 because it apparently looks for, e.g., "D:\VI\3rdparty.llb\my.vi", not "my.vi". So, as far as I can see, I have to save my.vi in 3rdparty.llb in order to use it. And, if I want to use 3rdparty.llb in another application, I have to save other vis to 3rdparty.llb or create a new copy elsewhere and save to that copy for the new application. A similar situation would occur if I passed the name of my vi to the 3rdparty.llb vis - either I would need to pass an absolute path and modify my application if I ever want to move my.vi, or save it in 3rdparty.llb.
Another example:
I have a large application built into an executable that calls up to ca. 60 vis using references. Previously I could just specify the path to the executable, and I could easily open references to my vis. Now (if I try to use the LV 9 file structure), I can't figure out the paths I need to open references. Either I have to specify the absolute path to the original location in my development directories, or I have to store all my source vis in some particular directory structure. If I want to reuse my vis in other applications (which I do) things would get pretty complicated. Likewise if I want to optionally open references in other vis than my top level vi (which I do), it seems well nigh impossible.
Basically I am struggling with the concept that an application remembers the directory structure where the source files were located, and/or depends on a particular directory structure of the source files to work. Maybe I'm missing some tricks that would make things easier, but someone will have to explain to me why these are good things.I appreciate the responses and explanations. I've certainly learned
some things. I have extensive experience using LV but over a fairly
narrow set of
applications so I'm certainly not aware of many of the possible
techniques. I clearly don't use LV in the same way as what appears to
be the mainstream for LV programmers.
I have some additional
comments on the various responses:
"But
with VI libraries and LVOOP this had the problem that multiple VIs could
end up with the same name..."
I'm not clear what this means exactly. My first response would be
that it doesn't seem like a good idea in general to use different
portions of code with the same name in a single application. I'm
surprised this is even possible. I don't think LV will even let me
build from a project in which it finds name conflicts for vis.
"In addition to what Rolf wrote, it should be
pointed out that LV should NOT be looking for files if you built your
app correctly. Each VI maintains a relative path to all VI it calls and
it should know exactly where to find them (assuming they're there).
I think this illustrates one thing I was talking about. The
assumption appears to be that the organization of your source files is
an essential ingredient in the application that is built, which is a
foreign concept to me. My project file knows where all my vis are, the
applications build correctly, and, using the 8.x and previous file
structure for my exe, they work, and have for some time. As far as I'm
concerned the main point of using a project that identifies my source
files is to be able to pull in code from different places - if I want to
use a different version of one of my dynamically called subvis, from a
different location, for example, I tell the project file to use the new
version and rebuild. In your scenario, as I understand it, I'm not sure
why a project file in which you identify source files is even needed,
if LV already knows everything about the components of the application
you're building. As I mentioned, my primary application uses ca. 60
dynamically called vis. Most of these control different subsystems of a
large distributed hardware control and data acquisition system. All of
these are used sometimes when the application is used, but pretty much
never all of them at once - typically something like 10-30 of the
user-interactive vis are run at once. There is some communication
between them using globals, queues, and semaphores and such, but for the
most part they are independent and I test them separately. Until the
application is built and used, there is no need to run the entire
application including all subvis, and I never do it. When I build my
application, the app builder finds all the vis I specify and constructs
the exe file including all the vis I've told it about. Before LV 9 it
never occurred to me that I might actually have to worry about being
able to find vis inside the executable.
"However as tst has mentioned having an
executable search for VIs is a VERY VERY bad idea as it can break your
entire app if it happens to find the wrong VI at some point."
I don't really follow this point at all. Where are these vis
masquerading as the ones I want that will break my application? The only
vis on the machines where my applications are used are there because I
put them there inside the executables. I certainly would never use
different vis with the same name in an application - as I said above, I
don't even know if it is possible, and don't want to find out. Search
paths to find components like shared libraries are a common thing. It
doesn 't seem like a stretch for the run-time environment to define a
default search path like "somewhere in the exe file containing the
application".
I don't want to make a mountain out of a mole hill here, as I said
before, I am happy as long as NI supports the 8.x file structure, but if
nothing else I have definitely learned to appreciate how different
executables built w/ labview are from executables constructed in other
systems.
Maybe you are looking for
-
i upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures?
-
Epson 1260 scanner driver not working
Updated to OS 10, I no longer have Classic. The scanner worked with Classic, not with new OS, tried downloading and installing new driver from Epson site, when I double click scanner icon, it bounces in dock then stops, the program doesn't open? Any
-
Hello Everyone I am new to managing fonts and am in the process of designing a web site for someone who uses Windows not OSX. He really likes their Broadway font. I don't have this no my iMac. I have been searching all over the forums but can not see
-
ITunes "stutter" when switching windows
This problem is a bit strange, so I'll explain it as best I can. iTunes runs normally (albiet, slowly as usual, it IS still bloated iTunes) while I have its window selected, but if i click on the desktop, internet, or any other window and then click
-
IPhoto 5 vs. Photoshop for Organizing
I'm in the process of organizing all of my photos. I use Photoshop CS to do all of my editing. I like the ease of use with iPhoto and am wondering if it would be a good way to get all of my photos organized. I'd like to save space on my hard drive by