I am attempting to install Readiris Pro Full Mac 11.5 on Lion 10.8.3. I get the error messages: 1. Error creating folder. 1008:9,-5000 Access denied error. and 2. "You do not have enough access privileges for this installation." WHAT should I do?
I am the only administrator on this MacBook Pro running OS 10.8.3. I created an admin logon, too, but got exactly the same results.
Can you help?
Thanks.
You need to get version 12 or 14.
http://www.irislink.com/c2-1628-17/Mac-OS-compatibility-support.aspx
Similar Messages
-
NO SYNC - You Do Not Have Enough Acees Privileges For This Operation
Ever see this? Never had a prob w/my regular iPhone or previous iTunes. Any ideas? Kinda weird.
I'm running Window Vista also. I got a new laptop and had the same error when trying to sync from a portable drive. Check the security permissions on the folders that sync with your phone. Once I changed those I was able to sync.
Good Luck. -
When tryong to burn a cd in itunes. A function I have done hundreds of times its tells me I do not have enough acess privaledges. How to fix this ?
This didn't help. I have the same issue. I created a new account in order to fix a recurrent problem opening IWork 09 after upgrading to Mountain Lion. I had tried all the suggested solutions for that with no luck. I also could not export anything in Preview. The export dialog would not come up. Restoring my original account did not work. So as a last resort I had to create a new account and transfer everything over from the old one. Now I cannot sync my Iphone. I repaired permissions, and still get the same error. This Mountain Lion upgrade has really messed EVERYTHING UP. And I notice pretty much NO difference in the OS, certainly not enough to justify all these headaches.
Now I am trying to restore my Iphone and see if that helps. Hopefully it won't cause more problems and I lose everything I already have on the phone.
There is an update to the software, so maybe that's it. But I don't know. I also don't know if I'll be able to use the Iphone backup that was supposedly created just ten minutes ago on my computer.
Oh, and I was able to get Preview to export things successfully at first when I created my account, but now it won't again. This is on the NEW account. EVERYTHING IS MESSED UP!!! I haven't even bothered to try and run IWork 09 yet. -
I purchased two songs on i-tune and when I attempt to down load them, I get an error,"you do not have enough access privilege for this operation.?????
To fix Home folder permissions
Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
sudo chown -R `id -un`:`id -gn` ~
Press RETURN. You will be prompted to enter your admin password which will not be echoed. -
Nothing has changed, all i am trying to do is sync my iPhone 3GS to my iTunes (Latest Update).
After clicking sync it attempts to do so, it gets to the backing up stage, then soon as this completes i get the following 2 errors right after eachother.
the iphone "name" cannot be synced, you do not have enough access privledges for this operation
(Click OK)
Attempting to copy to the disc c:\ you do not have enough access privileges for this operation sync
Then Sync cancels and nothing is done,
Cheers
KaySeeGot this stupid issue again, however it only happens when im trying to copy music from anywhere to my itunes, it works perfectly fine if i run as administrator however when i do this i am unable to Drag and drop music into itunes. and i dont want a stupid windows 7 popup every time i run itunes asking if i want to run it.
-
"the attempt to burn a disc failed. you do not have enough access privileges for this operation"
I just changed my password for my apple i.d. so I could purchase a new album. I then bought the album, put it into a playlist to burn it to a cd-rw. And when i click ok to start the copy i keep getting this message "The attempt to burn a disc failed. You do not have enough access privileges for this operation" I have no idea what to do as to there is nothing on google except for write access. Which i don't need. Any suggestions?
Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!
-
Let me give you a quick rundown of my setup
I have a fresh copy of windows 8 64bit with a slave drive installed to handle alll my media.
Im logged in as admin and salve drive has all permissions marked as "allowed"
The error messege that occures when i go to add a new song to the itunes library (which also makes a copy in the music folder on the slave)
The Error reads as follows "Attempting to copy to disk "X" Failed. You do not have enough access privileges for this operation"
I have tried a uninstall followed by reboot and a fresh install but that made no difference...... Please help me.
_KevinYou are showing problems with permissions on the drive. You need to either run iTunes as an administrator, or check to make sure that you are logged in with administrative priviledges on the computer. Despite having done it before, something has changed your permissions on the computer, has nothing to do with the phone.
-
When I attempt to update and then sync my apps, I get a message in ITunes
"the iPhone "_____ ____" can not be synced. You do not have enough access privileges for this operation"
Been using iPhone and MacBook Air successfully for many years
Do not understand this ???? Can not find help notes for this
ThanksHi cropduster,
It sounds like permissions have changed with your iTunes folder.
Follow the troubleshooting steps in the article below, and hopefully that will resolve your issue:
Troubleshooting permissions issues in Mac OS X
I hope this information helps ...
- Judy -
Every time a new audio file is downloaded onto my desktop, (or if I double click on a new audio file) iTunes no-longer will play them. It gives an error message stating: Attempting to copy to the disk "Mackintosh" failed. You do not have enough access privileges for this operations.
Please can you help me to resolve this situaion. I confess that I am not very computer savvy.Launch iTunes on the computer.
From the iTunes menu bar click Store > Authorize This Computer
Make sure to sign in using the same Apple ID used on the iPhone.
Then sync your iPhone. -
I recently had a hard drive crash and lost almost everything except for what I managed to save on Carbonite. When I got the new hard drive, I updated to Lion and began the laborious process of restoring my files. I think it is up to 40% done.
Anyway, I went to try to transfer my purchases from my iPad2 (4.3.3) and received the message: "You do not have enough access privileges for this operation" followed by: "Attempting to copy to Hard drive failed. You do not have enough access priviledges for this operation."
So, I did a search on the problem and have found similar complaints and some reasonable suggestions, which I attempted without success. So far I have:
1) Rebooted
2) Changed all the Permissions on the iPhoto Library and iTunes folders to Read & Write.
3) Used Disk Utility to Verify & Repair permissions.
Nothing is working.
HELP!Had the same thing happen to me a few weeks back when I switched computers and migrated. Here's what worked on my iMac, so maybe it'll work on your iPad, too. Go to User(your home folder)/Music. Select/highlight your "Music" folder. Then do Command-I ("Get Info" from the File menu), click on the padlock icon in the lower right of the new window. Enter your user password. Click on your username just above the now-open padlock. Select "Read & Write" if it's on "Read Only," "Write Only," or "No Access." Now having your user account with "Read & Write" privileges (it may have been this way already; still do this next step), click on the gear on the bottom-center of that window. Click on "Apply to all enclosed items." When the pop-up says "Are you sure?" (or the equivalent), say "yes." This will grant access privileges to your user account for all the music files inside your music folder--all your iTunes stuff included). Then you should be good to go.
-
I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!
You should ask in Illustrator
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'. It says it has synced but it hasn't. Please help, I am not very tech minded.
See this article about troubleshooting the error message regarding access privelages. It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
Trouble adding music to iTunes library or importing audio CD
B-rock -
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.
See:
iPhone - not enough access privileges: Apple Support Communities -
Everytime i click to go to my itunes, the message "The Itunes application could not be opened. You do not have enough access privileges for this operation." pops up. I have tried my best to fix it by adding another account to my computer and setting that one as the administator and mine as the regular user. When i did that the itunes worked on both, but when i changed my account back to administator and the other account to the regular user my account didnt work but the other one did. I also tried to uninstall and reinstall itunes. This message popped up when i tried to update the itunes to the newest one. And still it wont go away. Can someone help me please. Thanks!
Are you logged in with administrative rights? Did you check your security software settings? Troubleshooting security software issues
-
I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confused as to why this would start happening all of the sudden.
I poked around in the control panel trying to find random options that would fix it, but nothing has. I'm running Windows 7.
Thanks for any help!have you seen this discussion ?
Maybe you are looking for
-
Why does Mail reply to the first unread mail in a conversation rather than the one I'm viewing?
When I have "Organize by Conversation" set in Mail and I click on the top of a conversation group which brings up all the messages in that conversation, usually highlighting the earliest unread message, which is fine behavior. However, when I scroll
-
Synchronous HTTP Receiver adapter
Hi, I am configuring Synch HTTP receiver adapter. I have created synch message and did message mapping, etc. I am getting some message back from the receiving system but it doesn't have header info like namespace, service, interface name. Hence it fa
-
When I shoot RAW with my Canon Digital Rebel XT, I often change the settings inside the camera to B&W, tint etc.. When I import these images into Aperture, the B&W or tint is gone and I'm left with the "raw" image (obviously) But how to I get the ima
-
How to hide a tab from the existing tabstrip of CRMD_BUS2000111 transaction
I have to hide competitor tab from the tabstrip of CRMD_BUS2000111 transaction in CRM. I have tried shd0 but since this is not a dialog transaction we cannot create screen variant. After that I tried BUCO transaction.In BUCO I selected Sales Area dat
-
Sony SLT-A99V RAW files compatibilty with Adobe Photoshop Elements 9 : I cannot open the ARW file
Sony SLT-A99V RAW files compatibilty with Adobe Photoshop Elements 9 : I cannot open the ARW file from PSE9, what can I do, what are the options ? Je ne peux pas ouvrier mes fichier RAW de mon Sony SLT-A99V avec Adobe Photoshop Elements 9 : quelles s