I am aware that iMacs do not support Blu-ray. However could I use am a Blu-ray player connected via the audio/optical digital in port to watch Blu-ray on my iMac screen ?

I am aware that iMacs donot support Blu-ray. However, could I use a blu-ray player connected via the audio/optical digital in port to watch blu-ray on my iMac screen ?

You could connect a FireWire Blu-Ray drive and use non-Apple player software.
<http://eshop.macsales.com/search/external+blu+ray>
<http://www.macblurayplayer.com>
<http://www.macblurayplayer.com/download.htm>
<http://www.mcetech.com/blu-ray/>

Similar Messages

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

Bluetooth is only supported for tethering.
Barry

I am trying to use sites on the internet which require Adobe Flash Player, but when I click on the free download, it says that Apple does not support this application, so I cannot use it. This stops me viewing quite a few interesting things. Any ideas?

I am trying to use sites on the internet which require Adobe Flash Player, and when I click for a free download it says that "it is not available for your device because of restrictions that Apple has put in place". Any suggestions on how to overcome this?

Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices, something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

I cannot get my iPhone 5S to make a Bluetooth connection with my iMac. I get the Message that the iMac is not supported. Huh?

I cannot seem to get my iPhone 5S to make a bluetooth connection with my iMac (OSX 10.9.1). Phone claims that the iMac is not supported. Any suggestions?

The only connection supported to your iMac is Personal Hotspot to use the iPhone's cell connection to connect your iMac to the Internet. If that's what you're trying to do, see:
http://support.apple.com/kb/TS2756
Otherwise, as Raymond said, connecting your Mac and iPhone via Bluetooth is not supported.
Regards.

What to do when trying to connect iPhone and iMac with bluetooth but iPhone says that iMac is 'not supported'?

I'm having trouble connecting my iPhone to my iMac via bluetooth. Both devices discover each other and add to each others list but when I go to connect my iPhone tells me that the iMac is 'not supported' and to 'forget device' deleting it from my device list.
Any help would be greatly appriciated!
Cirsflan

because you did not complete the task ,
see here >>>>>
How to unlock your iPhone for use with another carrier - Apple Support

I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

Hello mrmacjohn,
Verifying that any iCloud account that may be signed in is signed out should resolve this error.
On your Mac, open iCloud preferences, then click Sign Out.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Cheers,
Allen

IMac does not support Power PC. A fix?

My iMac does not support Power PC. Is there a Reader fix?

If your Mac is PowerPC the latest version that you can run is Reader 9.4. Adobe stopped ALL development of PowerPC versions of software in November of 2010, and Apple doesn't even support PowerPC Macs or software anymore. It may not be what you want ot here, but your Mac is obsolete.

My iMac will not support Yosemite. I need Mavericks. How can I get Mavericks?

My pre-2009 iMac will not support Yosemite. It has Snow Leopard. Apple should let me obtain the latest OS supporting the Apple computer. Any suggestions?

Mavericks is no longer available. You will need to use Yosemite. You can get Mountain Lion, however:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Or you can stay with Snow Leopard.

"........iMac is not supported on the iPhone

I have an older iphone - 2 I think. When I try to connect the bluetooth I receive a message on the iphone, ".........iMac is not supported on the iPhone" Does anyone have a solution. Both the iphone and imac can find each other, the iphone just will not accept the imac. Is there a download to upgrade the iphone to accept my new imac. Thank you.

iPhone's have never been able to sync via Bluetooth.
In the last year Apple added WiFi sync to iTunes, so you can sync an iPhone or iPad via WiFi with iTunes.
You can also sync wirelessly over the internet using iCloud for contacts, calendars, bookmarks etc - again over WiFi.
But you cannot, and never have been able to, sync an iOS device with a Mac over Bluetooth.

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out. I need these programs. How do I proceed?

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?

Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

I have acer al1916w and i have a problem message that say input not supported help

i have acer al1916w and i have a problem message that say input not supported help

under windows 7 - 8.1right click on your desktop and choose screen resolution set a very basic resolution like 1280x1024 @ 60Hz (frequency can be set under advanced options); you need to have a working monitor to set this and then reboot connecting your al1916w. if it still gives you that message, can be a bad cable or some hardware monitor issue.

HT4528 hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
Even if I sold this Ipad and bought a new one, the system memory is still there.
I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
Thanks for your comments.
RAZ

I purchased Elements 13. When I tried to install I get the error message that it is not supported by Vista. Now what do I do?

I purchased Elements 13. When I tried to install it I get the error message that it is not supported by Vista. What do I do now?

If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
There are many inexpensive refurbished or "off lease" computers available at very reasonable cost. Here is one example (scroll down):
Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed? i never had this problem before. if i do this will i loose all my files, music, etc?

When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?

No, you should not lose anything.

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still us

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still use Flash Player...
Is there anyo who can help me with this? I asked in the shop and I was told "yes of course" , but when I contacted Sony directly I was advised to check with Adobe as apparently in the recent months Adobe and Sony haven't been getting along anymore...

You may be mixing up two entirely different Adobe products.
1. Adobe Flash Player. Needed to view web pages designed with Flash. Not needed to view PDF files. Not available for Android (not just Sony).
2. Adobe Reader. Reads PDF files. However, the Android can also read most PDF files without needing Adobe Reader.

I am aware that iMacs do not support Blu-ray. However could I use am a Blu-ray player connected via the audio/optical digital in port to watch Blu-ray on my iMac screen ?

Similar Messages

Maybe you are looking for