I am being kicking offline all the time the error is 80710102 what si this and how do i fix it
hey dose anyone know what this error 80710102 is and how doi fix
I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work.
Similar Messages
-
How does one fix error code 2324 that I receive each time I attempt to upgrade my iTunes. Of course now iTunes will not work until this issue is fixed. Thanks, D
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled -
When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry
I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work. -
My Ipod is stuck with a picture of a USB chord with an arrow pointing to an itunes logo....what is this and how do I fix it? I did look at the "printers and devices" section on my computer. It shows an un identified "apple" device that is in "recovery mode" but that is. I tried to trouble shoot it there but no help....
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I have Photoshop 7.0. This is on a laptop running windows 8.1. When I try to open it I get the errro message: " cannot open missing personalization information".
what is this and how can I fix it.Run it in compatibility mode and input the credentials.
Mylenium -
My software is STUCK on "Retrieving current session status" What is this and how do I fix it? i am not able to convert any files at all!! Please help!
Hi JulietaQ,
In order to help you better.
Please let me know which application or Service of Adobe you are using. If this is subscription i would request you to log-out and log-in back and let me know if that helps.
~Ajlan Huda -
I get a notice when trying to sync my iPad. "this iPad cannot be used because the Apple Mobile Device Service is not started".....What is this and how can I fix it? Help please
Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE
-
Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?
Hey HaydenJulie,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
I installed the new 5.0 version of Firefox and the thing keeps telling me i have to resart my system to finish the install of an old version. I resart and it doesnt do anything. What is wrong and how do I fix this. I have been using firfox for more than a year now and have never had trouble till this issue came up
If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
http://kb.mozillazine.org/Uninstalling_toolbars -
I have a small icon at the top right of my iphone 4G right to the left of the battery percent. What is this and how do I get rid of it? It looks like a lock with a circle 3/4 of the way around it
That icon indicates your iPhone is rotation locked.
To remove it, swipe up from the bottom of the screen to open Control Center. Tap the similar looking icon there to turn it off. -
Trying to Launch my new typestyler 11 or my old 10 version. Used to work great. then it would just shoe the splash screen and menu bar for a second and dissapear. the concolse message is the ATS: Invalid FontObjectID (4).
What does this mean and how do I fix it?It's an old post, I know, but I've got this one now:
ATS: Invalid FontObjectID (3) - only low 16 bits are being passed in.
It's in my most important app and causing problems. I worked a lot on this trying to solve it but so far I can't. I'll take any advice you or anyone might have.
Thanks. -
I have tried syncing my music from my itunes on my macbook to my iphone 4s and over 30 song won't transfer. It says the files cannot be found. Why is this and can I fix it?
You can try to repair your library. Once you are sure the files are all taken care of, you can sync the phone to remove all of the music and then sync again to add it back. That should take care of the issue.
-
I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?
My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl! -
Its really irritating having all my songs there one day and having half of them go missing the next and i haven't done anything to cause the files to be lost, on top of that it's completely randomised in what songs have gone missing as it is not whole albums, individual songs from different albums are going missing and it's telling me to find the files, which i have no idea where to look or what to do, it has rendered iTunes completely useless for me. Does anyone else have this problem? How did you fix it?
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Having trouble with email. Error message 1032?
Thanks. I did this and all my e-mails came up.
For those of you who don't know this, if you press the round button twice quickly, all the apps you have been using come up. If you hold the first one down until the icons wiggle, you'll get a minus sign in front of each one. While they are wiggling, hit the minus sign and that app will close. When they are all gone, reopen your e-mail and they should be refreshed.
Maybe you are looking for
-
PO number display in FBL1N vendor open items
Hi MM Gurus, Is there a way to display the PO number beside the vendor line item display. In the Change Layout option, there is a Purchasing Doc field that you can add but the field is always blank, does not display the corresponding PO. I understand
-
Change font in iMovie 10.0.7??
I'm pretty new to iMovie and I am trying to change the font/font color in iMovie 10.0.7. I am using the Epic Drama trailer and cannot figure out how to do it! Help!
-
Can print from HP printer assistant but not from windows
I ran the basic driver setup for my wireless printer. Everything looked OK. I then tried to print a test page from the control panel printer properties page. The document was shown as printing but nothing printed. I also had the same results when
-
I keep getting this popup when I try to see my email and it says "Cannot get email, server not responding". I am receiving and sending email but it is duplicated. This has become a nuisance and I will be going to Apple Store to let them look at it. D
-
Good Mornig to all, i'd like to build a Radius Module under WLS 8.1, and i'm looking for some advises. What i wanna build Isn't just a simple application deployed under WLS, if i can, i wanna build something like a Radius Plug-in