I am buying CS6 update. Do I uninstall CS5 and Bridge 5 first?

I have CS5 and Bridge 5. (W7) Do I uninstall them prior to installing retail CS6 update?

Thanks, Curt Y. I am inclined to uninstall CS5 and Bridge first, in view of your comments. I am not clear if the CS6 version of Bridge is different to the CS5 version. If the same I will leave Bridge as is. My photos are all backed up several times in W Explorer so not worried about losing anything. I assume the Bridge cache will re- poulate. Last point - I use TWAIN with 32 bit CS5 as I like its flexibility when scanning with my Canon scanners (35 mm to A4 with different dpi) I believe there is a new TWAIN plug in for CS6 32 bit. The old one in CS5 caused CS5 to crash if one used the "File, Automate, Batch" command so I imported in 32 bit and did the batch work in 64 bit - slightly inconvenient but WIA is not an answer and TWAIN is so nuch more convenient. If anyone could comment on this I would be grateful.

Similar Messages

  • When I downloaded CC, I uninstalled CS5 and CS6, now I cannot open my older psd

    When I downloaded CC, I uninstalled CS5 and CS6, now I cannot open my older psd photos, has anyone else had this problem...

    Your info is at best vague. PSD files are compatible across versions on a very broad level, so whatever problem you have may be very specific. You have not provided any relevant technical info about your system or your files, so nobody can say anything specific, though.
    Mylenium

  • Please help! can't uninstall photoshop and bridge... I've ended my subscription and I don't need it anymore

    Please help! can't uninstall photoshop and bridge... I've ended my subscription and I don't need it anymore

    Hi,
    Please refer to the help document below to uninstall the apps:
    Creative Cloud Help | Download, install, update, or uninstall apps
    In case of any error message, please specify or paste a screenshot.
    Regards,
    Sheena

  • Problem with update of Photoshop CC (2014) and Bridge.

    Any time I restart my Mac, Creative Cloud asks me to download the last update of Photoshop CC (2014) and Bridge, what can I do to resolve it? It is not a big problem but I don't like it!

    sign out and then back in to your cc desktop.
    if that fails, try solution 2 here, CC desktop lists applications as "Up to Date" when not installed

  • I am trying to update Adobe Extension Manager CS5 and I keep getting "There was an error downloading this update. Please quite and try again later."  I have tried again and this keeps coming up?

    I am trying to update Adobe Extension Manager CS5 and I keep getting "There was an error downloading this update. Please quite and try again later."  I have tried again and this keeps coming up?

    Please do a forum search.  I and others have repeatedly answered this question a whole bunch of times recently.
    Bottom line:  the Adobe auto updater is utterly useless in CS5 and prior versions.  You need to download the updates and apply them manually yourself.
    I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

  • Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received Error Code: U43M1D207. Any suggestions?

    Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received Error Code: U43M1D207. Any suggestions?

    Download the Fireworks updater from here:
    https://www.adobe.com/support/fireworks/downloads_updaters.html
    When you have downloaded and extracted the file right click and then click "run as Adminstrator".
    It should work for you. I had the same issue and did this and everything worked,

  • Do i need to uninstall PS6 and bridge trial versions before installing the Creative Cloud?

    do i need to uninstall CS6 and Bridge before installing Creative Cloud?

    No this is not necessary.  You can leave them installed.

  • How do I find the right patch / update so Photoshop CS 6 and Bridge can read my raw files from Canon 5D MKIII.

    I reinstalled Photoshop and now I can't read my raw files...

    If menu Help>Updates does not. Try download and install the ACR 8.6 update for Photoshop CC if that does nor work try downloading and installing ACR 8.6 withe the DNG converter.  If installing that does not install into CS6 and Bridge common ACR plug-in folder copy ACR 8.6 into that folder after renaming  the existing ACR there.
    All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools

  • Integrating Adobe CS6 updates into Trial to make and upto date installer

    Hi,
    As the title says i would like to create and upto date installer for cs6 so that i can install it when i need to with all the updates already integrated rather than have to download them each time.
    1) Is this possible
    2) if it is, how do i go about it?

    Where applicable, the apps are already the updated versions. Beyond that there is no way to rig this differently AFAIK. Some updaters are patch installers that check and are dependent on existing full install while at the same time actualyl removing faulty components and it would be a nightmare to just create a custom install package for that.
    Mylenium

  • Cannot down load itunes. Had it before but couldnt update so I uninstalled it and removed all the components but I get a message stating the installer has insufficient privileges to modify this file. Then an error message

    I cannot download itunes to my pc. I had it on a couple of months back but I could not update the software so i removed everything and tried to reinstall. I get a message that says "The installer has insufficient privaleges to modify this file. Then when I click that off it continues to download and says its complete and ready but when I try to open i get another message "error#7 itunes did not install correctly. Please reinstall. "Which I have tried to do to no avail. Any suggestions?

      Many thanks.
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Do I uninstall CS5 & CS6 before downloading CC?

    I have Master Creative Suite CS5 (disk) installed on my iMAC running Mountain Lion 10.8.5.  Some time ago I subscribed to Creative Cloud and installed CS6.  Major computer problem caused me to have to wipe the hard drive and restore from the backup disk.  My last backup was September last year which was before I installed the Creative Cloud CC apps.  I would like to install the CC apps.  Do I uninstall both the CS5 and CS6 apps first? At this point neither of the CS5 or CS6 apps have been updated.

    Hi Stormy_Weather,
    It would be best to uninstall CS5 and CS6 before installing Creative Cloud applications as the previous versions are restored from a backup which might cause issues.
    Regards,
    Akshay

  • Can't uninstall CS5 or CS6.

    Hi,
    I'm having a problem when I try to uninstall CS5 and CS6 suites on my iMac.
    I installed CS5 suite like six months ago, then, two weeks ago I installed CS6, but before I uninstalled some components from the CS5 suite. Just remains Adobe Photoshop and Adobe Illustrator.
    I installed CS6 and all good, then, I had some problems with Encore CS6 so I found a post that says that I should use the Creative Suite Cleaner Tool. I did use it, all good.
    Today I'm having a second problem with links between Encore CS6 and Photoshop CS6, so I tought it could be because of Photoshop CS5 installed in the same Application folder. So I decided to uninstall that application, but, I can't.
    I can't uninstall any Adobe application from my iMac, I click on any 'Uninstall X application' and just appears this error: "The alias "UNINSTALL X ADOBE APPLICATION" can't be opened because the original item can't be found." The uninstaller just dissapeared for both Suites and I need to uninstall them.
    Can you help me community?
    Where can I get the Uninstaller for Adobe applications?
    Thanks.

    Run the Creative Suite Cleaner Tool, reinstall.
    Mylenium

  • CS6 Update & RAW Converter failure

    CS6 update - error message U44MIP7? And cannot activate downloaded RAW converter for Nikon D610?

    Please confirm your Ps & ACR version from Help->About Photoshop and provide us with the following logs.
    You can find them at:
    PS & ACR Installer logs
    For Mac:
    Library\Logs\Adobe\Installer
    For Win:
    Program Files(x86)\Common Files\Adobe\Installers
    AAM logs
    For Mac:
    /Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
    For Win:
    C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
    You can zip all the files together and send us through mail. This would help us in finding the root cause.
    Appreciate your help. Apologize for the inconvenience.
    Regards,
    Ashutosh
    [email protected]

  • Uninstalling cs5.5 to install cs6

    If i install cs6, will it over write cs5 or will i need to uninstall cs5 and then install cs6?

    Creative Suite 6 will not affect your installation of Creative Suite 5.

  • Is is possible to buy a legal copy of premiere cs5?

    My CS5 was clobbered when my computer crashed and I built a new one.  I'm unable to document that I ever owned it or previous versions.  I don't want the cloud.  Is it possible to buy a legal copy of CS5?

    I suggest you buy CS6 instead. It is available and is the last perpetual license.

Maybe you are looking for

  • View with selection conditions with system fields.

    Hi Experts, I have a view. Now i want to control the data that is selected using 'Selection Conditions'. here i want to use system field SY-DATUM. My requirement is  i want to control the output like Valid_From_Date GE SY-DATUM and Valid_To_Date    

  • How to tell if a machine is compromised?

    Is there a definitive way to confirm that a machine has been compromised and and allowing an outside user hidden access? I'm not quite sure what the limits are on how much the reality can be distorted. I know teh logs can be altered and system binari

  • DSNewHandle fails with 2-D handle

    All; The following bit of code (StringRowAdd) mem-faults in a LV-called DLL, the other code (StringAdd) works fine. Can a programming god figure out what I'm doing wrong here? ...Dan void StringRowAdd(TD4Hdl in_array, char *string[], int cols) int i=

  • Programs not staying in assigned spaces

    I've had an issue with Spaces ever since it came out.  Programs won't stay in their assigned Spaces.  It happens with MS Office (both 2004 and 2011), Adium (won't always show in all spaces when assigned to all spaces), Safari, Firefox, Chrome, iCal,

  • Can an autosuggest cfinput be controlled/filtered by a select menu?

    I'm working on a search service where there are going to be at least 3 types of searches, each of which can be made easier by using an autosuggest.  Is it possible to change the binding/returned values for the autosuggest based on what the user has s