I am connected to an airport utility base station I don't recognize

I don't understand much about the technicalities of how internet connections work, but today I was working on my macbook as usual and I noticed a message from airport utility telling me I was connected to an Airport Express device from a "Josh". I have no idea what that means. I tried to find out more about this base station, but it asks for a password I don't have, so I can't seem to disconnect. Does anyone knows what that means? Btw, I live in student's building so we have shared connection via ethernet. I've been searching on google for a while now and found nothing to explain.... help, pls? thanks!

I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.

Similar Messages

Connecting to multiple Airport Express base stations at the same time?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single internet connection behind my stereo and it's connected to the Pay TV. My options seem to be getting a new line installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

Connecting to multiple Airport Express base stations for internet and TV?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single ethernet connection behind my stereo and it's connected to the Pay TV. My options seem to be an ethernet splitter (maybe - any ideas?), getting a new ethernet connection installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

Several PC and Mac connectivity issues with Airport Extreme Base Station

Hello,
This is not all necessarily airport base station related, but there is some crossover, so I'm posting all of these issues...
Here is the laundry list of things that I can't make work in a home network that contains a PC w/ XP Home, MacBook 1.83 w/ 10.4.7, and Airport Extreme Base Station w/ Modem.
1. Can't see the PC from the Mac.
a. "Connect to server -> Browse" does not find the PC
b. "ipconfig" on PC provides valid looking IP address
c. ping from mac to PC IP address times out
d. Firewall on XP is disabled via control panel
b. Windows file and printer sharing is enabled
2. Can't see mac from PC
a. Windows file sharing enabled on mac
b. Firewall on mac disabled
c. I used \\MacIPAddr\shortusername
d. ping times out
3. Using dial-up to access internet, how do i tell airport to dial using PC?
a. this feature is working fine from mac
b. If already connected (via instruction from mac), can surf the internet fine from PC
c. Is this even possible from the PC?
4. Can't see printer connected to base station from PC
a. See it fine from mac
b. How do i "find" the printer on the PC?
c. Is Bonjour required for this? (I don't have it on the PC yet)
5. Can't see a "shared" printer on the PC from the mac
a. printer is connected directly to PC
b. Mac's add printer wizardry looks like it may "see" the printer, but then it asks for username and password for PC. This is XP home, with no usernames or passwords. Single user. Nothing seems to work in the credentials pop-up dialog.
Any suggestions on any of these issues is very welcome.
Thanks

Is the PC running any kind of internet security or firewall software?
1. Can't see the PC from the Mac.
2. Can't see mac from PC
Sharing files between an XP PC and a Mac running OS 10.4.x
http://www.ifelix.co.uk/tech/3020.html
3. Using dial-up to access internet, how do i tell
airport to dial using PC?
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility
http://www.java.com
4 . Can't see printer connected to base station from
PC
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
5. Can't see a "shared" printer on the PC from the
mac
Printing to a printer on a XP PC from a Mac running 10.4.x
http://www.ifelix.co.uk/tech/3015.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Airport can't connect to my Airport Extreme Base Station

Hi all,
Just had this nagging problem for a couple of days. I can connect and see my aebs in airport utility but can't connect it to network in the airport menu. The network is fine and is working on my macbook, but the macbook pro can't see it. Both laptops are using 10.5.4 any suggestions?
Thanks in advance.
Chris

Hello paisleymum. Welcome to the Apple Discussions!
You shouldn't have had to reconfigure the AirPort Extreme Base Station (AEBS) just because you have a new MacBook. Was there a particular reason that you needed to?

How do I view a file from a usb hard drive connected to my airport extreme base station on my ipad 2?

Hi,
I just purchased the airport extreme base station. I have a usb hard drive connected to the base station. Is it possible to view this hard drive on my ipad 2? I have been unable to do it. Any help would be appreciated.

You can't, not natively. An app like FileBrowser:
http://www.stratospherix.com/products/filebrowser/
may make this possible, though.
Regards.

Airport utility base station indicator conflict

After upgrading firmware to 7.6, I'm having an odd issue with the Airport Utility. I have a dual base-station setup, connected together via twisted pair so that the second unit is in bridge mode. It has been working well for over a year.
From the enclosed picture, you can see that the summary shows amber for both base stations, but when I bring up details, everything is green. The network is working fine. Also, the IOS Airport Utility reports everything is fine.
This did not happen before the firmware upgrade - back then everything was green.
Any ideas?

It is always a good idea to power cycle the entire network after any firmware update to any of the AirPort devices.
Try the following:
Power everything down on the network....all devices....order is not important
Wait a few minutes
Power up the modem first and let it run for a minute
Power up the next device connected to the modem the same way
Keep powering up devices the same way until everything is back up
Check the network again using AirPort Utility

I am trying to stop my Xbox from connecting to my Airport extreme base station and only connect to my airport express extender. Anyone have any ideas?

I have an aiport extreme base station in my living room and an airport express in my bedroom extending the network. For some reason my xbox along with some other devices always connects to the extreme base station in the living room which has a very low signal. Is there a way to setup a seperate network for my express extender so that I can connect only certain devices? HELP

You would probably want your Express to join the network if an extender isn't required. Reset to factory settings and join the network.
If you do want your Express as an extender run an Ethernet cable between the Express and the Verizon router and set the Express up to be in bridge mode, with the same WiFi network name and password as your Verizon router.

Airport Utility Base station password

Hello
I have the Airport Extreme router and I have also installed the Airport Utility programme on my win7 machines for convenience.
The win7 wireless machines including the Apple macbook always prompts for a password ( As I set-up Airport Utility to work this way ) but whenever I open the Airport utility which I have installed on the wired Ethernet desktop win7 machines, the Airport Utility never prompts for a password.
My question is can I force the Airport Utility on the desktop machines to prompt for a password ?
When I open the base station and select manual setup, then under base station I have un-ticked remember password in my keychain and then updated this, but whenever I reopen the Airport Utility the tick reappears and the Airport Utility opens without prompting for a password.
I must again stress that the wireless machines always prompt for the password.
Thanks

Your desktop machine has already stored the Base Station password, so unchecking the box that tells the PC not to remember the password that it has already stored is not going to work.
I don't know where Windows keeps stored passwords, but if you do, you will need to access that file and delete the Base Station password there.
If you don't know how to locate the stored password file on the PC to erase the password, then the simplest thing to do might be to set up a new Base Station password, and make sure that the box next to "Remember password, etc" is not checked when you click to Update the new settings in AirPort Utility.

My airport express is not connecting with my airport extreme base station. They are probably six years old. My IP address on my express shows 0.0.0.0

My Airport extreme and my airport express are not connecting together. I get an error message saying that my airport express software is not compatible with my Airport extreme and I have use them together for the past five or six years. It says I may need to change my IP address on my computer or something like that but I don't know what to do. the IP address on my express shows 0.0.0.0. Should everything be on the same IP address? Any help would be greatly appreciated. Thank you

Please refer to the information already posted above:
If you see A1084 or A1088 there, your older Express is not supported by the newer version of AirPort Utility that you have.
If you have another Mac running Leopard or Snow Leopard, or a PC, then you could use that computer to administer the older Express and it will work on the network along with the AirPort Extreme.
If the Mac running Leopard or Snow Leopard or PC does not "see" the A1084 Express, you will need to "hard reset" the Express by holding in the reset button for 10 seconds and waiting a full minute for the Express to restart. Then, reconfigure the Express again.

I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

HT204057 Why does Time Machine no longer support external hard drives connected to an Airport Extreme base station?

I'm pretty sure that upto a few months ago I had a hard disk connected via USB to my Airport Extreme and I was able to backup all the computers on my home network. However, somehow over the last few months this had stopped happening. I am not able to select my network disks for time machine backup.
There is a very unhelpful sentence on Apple's website which simply says it does not allow backup to hard disks connected to Airport Extreme via USB. Does anyone know why this is? Is there a way around this? Can I connect a drive to my desktop computer and have other computers backup through the network to that?

This was never an approved configuration: OS X Mountain Lion: Disks you can use with Time Machine
Can I connect a drive to my desktop computer and have other computers backup through the network to that?
The above KB article indicates you can, though I have not personally tried it.

Can an original Airport card connect to an Airport Extreme base station

I have an old iBook G3 10.3.9 with an original Airport card (System Profile says "Wireless Card Firmware Version: 8.70"). This computer/airport card connects fine with an old Airport Graphite.
But it will not connect with my main Airport Extreme 802.11n (1st Generation), running in 802.11n (802.11b/g compatible) mode. This Airport is using WPA/WPA2 Personal wireless security. This Airport Extreme works fine with my other computers and devices.
Does anybody know, offhand, whether it is just a setting, or is this completely unworkable?
Thanks in advance for any input.

I cannot remember all the details regarding the older iBooks, but suspect that the wireless card and possibly the operating system that you are using on the iBook cannot support WPA/WPA2 wireless encryption.
As a test....
Temporarily turn off the wireless security on the 1st Gen AirPort Extreme, then see if the iBook can connect to the wireless network that way.
If it can, this tells you that the wireless is at least working on the iBook....but it cannot connect to the WPA/WPA2 network.
The solution might be to use a USB wireless adapter that can handle the higher encryption levels, or connect the iBook using Ethernet.
If the iBook still cannot connect when security is disabled during the test, then the iBook has additional issues that you may or may not wish to pursue.

Can't connect to a VPN through Airport Extreme Base Station

I'm unable to connect through my Airport Extreme Base Station to my office via VPN. Is there something needed to be set up specially?
I'm using a notebook with WindowXP which connects to internet just fine.

Here is info:
Airport Utility finds an Airport Extreme with 802.11n(fast ethernet)
Base Station Name: Home
IP Address: 10.0.1.1
Airport ID: 00:19:E3:FA:A8:32
This is not the IP address of the modem. Even though light is green on Base station the ATV doesn't make the wireless connection.

Airport Extreme Base Station Internet Connection issue

I have a connection question for Airport Extreme Base Station.
I have Comcast cable broadband. I connect that to a Linksys router for
use with my Vonage phone, and then from the Linksys router I connect
via Ethernet to my iMac. I like the direct Ethernet connection for
performance reasons.
In order to set up a home network to connect my Tivo's (and eventually
my PC and printer), I have set up an Airport Extreme Base station and
connected it to the Linksys router from it's ethernet connection to the
WAN (cable modem) input on the Extreme.
I have connected to the Airport network with my iMac, but since I am
connected to the Internet via Ethernet, I cannot tell if my Airport is
connected to the Internet so that I can use it for my Tivo. My PC is
still in storage from a move, so I can't check with that.
My question: How can I tell if my Airport is connected to the Internet
without disabling my Ethernet connection on my iMac?
A few more info points/questions in case it helps answer:
1) I previously used this Airport to connect this iMac wirelessly.
2) Should I be connecting it to the LAN port since it's coming out of
the router?
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
I appreciate any help as the online and manual help from Apple is not
quite up to par with such a complex configuration.
Regards
Bill

2) Should I be connecting it to the LAN port since it's coming out of
the router?
No, connecting to the WAN port is fine.
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
The issue is that you have two routers which effectively creates two networks. Unless this was your original intent, you will want to setup the AEBS as a bridge.
To set up the AirPort Extreme Base Station (AEBS) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new settings.
- Wait at least 5 minutes.
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
Well, that's certainly one way, but an easier way is to temporarily disable the "Built-in Ethernet" in your network configuration.
System Preferences > Network > Show > Network Port Configurations
- Built-in Ethernet (unchecked)

I am connected to an airport utility base station I don't recognize

Similar Messages

Maybe you are looking for