I am connected to my remote server and "put files" but the web page files do not update, whats going on?
I really can't figure this out:
So I use a different computer at school for web design, I bought Dreamweaver to work on it at home, I get the files fine from the server that I uploaded at school but then I make changes at home computer and connect and "put" them and I check online and the web page doesn't change one bit.
I don't have the exact file extensions from the computer at school but when I connect and get I have a similar folder(s) set up and then it downloads them into Dreamweaver file manager box and makes the folders there I downloaded. The site shows up fine in Dreamweaver after I "get" so great I thinking.
But... not so fast, I change the page in Dreamweaver, preview n a browser and look right on so I "put", connect to server and upload. Then I check online an its still the same I uploaded the CSS and HTML and dependent files by dragging over and also using the up arrow "put" as well but nothing changes on the web page online.
What is happening here I am so confused?
Thanks a bunch, I mean I can still preview as I go but I really curious why my "put" files don't change my web page like at all!
Have you tried refreshing the browser, or deleting the browser cache?
Similar Messages
-
Connect to remote server and edit content on a web page
Hi ,
Is there a way to connect to a remote server, edit some content (words only, not tags etc..) and then save. I'm not sure if I'm being clear enough about this but I'll answer questions when asked.
Thanks
SteveHI,
I've looked at your suggestion and it is what I'm looking for. I'm going to try this on a new site as soon as the site is ready.
Thank You
Steve -
I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!
Make sure that Work Offline is unchecked: File > [] Work Offline
-
Safari cannot open the web page becauseit could not connect to the server.
Hello, recently I have been trying to access a web page that I can only access if I delete the "www." in my browser before I hit the "go" button. If I do not delete the "www." I get the error message "Safari cannot open the page because it could not connect to the server. I have tried restarting my ipad 2 by holding down the home and lock button but it has not worked, I do have 7 tabs open right now but I dont think that would be a problem would it? I have full internet access so I dont think tap hat would be it.
That didnt work :/ This website is hosted on a platform called enjin and I have noticed every enjin website is doing this to me so could it be something on there end? I havnt heard from anybody else who is having the same problem.
The website looks different from what it did before this started happening to me, here is a screenshot of what it looks like now.
[img]http://imgur.com/cWvR95e[/img] -
I have a big problem. I cannot log in on the Skype application on my PC (Win 7). The password is correct and so is the user name. I've tried logging in via both my microsoft, skype and facebook accounts but it doesn't work. The strange thing is that it works in the internet page. I've tried to change password many times but it doesn't resovle the issue. When logging in with the Skype account I'll get the message "Could not connect" (In Swedish).When logging in with the Facebook and Microsoft account I'll get the message "Sorry, we don't know your loggin information - Please controll your Skype-name and password". The Skype application say it is up to date when using the function "Search for updates" in the "Help" drop down list.
I've got the same problem. The same on one PC I've got 6.11 version ... and uninstall/download & install reseled the problem BUT, on anoter PC I have 6.20 version, and that one did not sigh me up, untill I have clicked recovery/get email/clicked on received link. - That is strange and annoing, but, even more unfear and discusting: - The version 6.20 also replays 'You have latest version'! And on skype site it is not shown up the current version, which is today 6.21.59.104 My opinions: 1: it is inappropriate to disallow old version to see the newest version number 2: the same even with more reasonability applied to 'still suppoted version', as 6.20 I guess is for today! 3: What is it the way to restrict access to user account WITHOUT any explanation why!!! - it must say 'it is old version and we closed acces to our site; update to current, which is ....'(if Skype comunity have trouble to prepare a page with such message as a redirection for not-up-to-day version I could help; or my children could ... or it is an issue to place it ?!)
-
windows xp /ff 3.5.8 [tried upgrade to later versions but I completely lose my synaptics tp scroll function]
as the title says, on some/many sites, when you scroll down the page, FF gets "stuck" on an image and the page becomes jumbled as it crawls along for a short while, then it will get past the "obstruction" and scroll okay. but scrolling back up it hits the same bump.
it is 100% repeatable
the same page in IE scrolls just fine.
thanksReset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)<br />
See:
* http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
See also [[Websites look wrong]]
If you need to increase (or decrease) the font size on websites then look at the NoSquint or Default FullZoom Level extension.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592 -
Went to this page - end user license for TooManyTabs - Saves Your Memory 1.3.4. Clicked on accept and install button. Nothing happened. Went to several other pages and clicked on the same button and nothing happened.
Click the Firefox button, go to Options | Options | Advanced and in the General tab, remove the checkmark from "'''Warn me when websites try to redirect or reload the page'''".
You won't get that dropdown banner anymore afterwards. -
Why does it say my wifi is connected but the web page doesn't open?
I would be using the internet for an hour and then it disconnects but says it's still connected. I would have to turn the wifi off and turn it back on then reconnect for it to work. Should I make a genius bar appointment?
It's pretty tough to help if you don't provide any informaton about your system. Please complete your profile so we know the version of OS X and which iMac you have. Try some basics such as resetting your modem and router. Those two are frequent causes of issues.
-
I've tried to do this several times on several days, on an HP a1620n running Windows XP Media Edition, Version 5.1. Nothing happens after I get the Download Complete message. Thanks.
Thank you! My solution was slightly different, but in the end, seeing what was going on in the Help menu in the browser did the trick. Turned out I had been stuck for who knows how long "downloading" a version 3! Also had a toolbar to disable but not the Ask.
-
iphone 4s need help battery not workin since uptade of ios7
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I have been building web photo galleries with Bridge for a few years and everything worked fine until my latest two builds. Now when I build a gallery and upload the folder to my web server, it's not getting displayed by browsers. When you hit the index file of the gallery, the page is blank with no written errors.
When I use the "preview in browser" feature in Bridge, the slide show works as expected.
I'm creating the gallery and saving to my local hard drive. When that's complete, I ftp the entire folder to the server and then point to the index.htm file. I've been doing this for two years with good results. All of a sudden, I can't get a gallery to display on-line.I am experiencing the exact same problem; the gallery displays and functions perfectly when viewed locally but not when uploaded to the web server. I am wondering if it is also a Dreamweaver issue as each time I upload I receive an error report e.g. some files did not upload et cetera.
-
Caching the web pages using an application server...Please help
Hi all.
I have an application developed using Struts 1.1 which uses JBoss 4.0.2 as an application server.
In this application user is required to enter a valid url and my application fetches the web page pointed by this url
and render the same after doing some pre-processing.
I want to implement caching of pages on server so that if a different user requests with the same url that was earlier issued, that time my application should render the web page that was cached earlier. (so that i can avoid connecting to that url, fetching the page and further pre-processing).
One of the way i know is to use "application" object, which can be shared among multiple users.
Are there any other efficient ways ? What about the performance if i use application object ?
Please help as i am stuck with this.
Thank you all..
PrasadUsing the application scope is one way to do it.
I would recommend writing a CacheControl bean to handle this for you (or re-using an existing cache object)
You can put that bean into the application scope. Just to keep things neat and tidy.
How that bean then caches web pages is up to you
- Store them in memory (I would recommend a LinkedHashMap in LRU mode)
- Store them to disk - less memory intensive, a bit slower but can store more
How are you going to determine if a page is "the same"?
I think you should also consider the "no-cache" tags that a page may send with itself.
Caching can drive web application drivers nuts, as the page actually DOES change on every request.
Cheers,
evnafets -
Log on to remote server and start database -error while installing CI in HA
Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </p> </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
RishiDear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE -
JMS - Unable to connect to a remote server
Hi All
I am trying to point my WL7.0 to a JMS QUEUE on ORACLE FUSION WL10.3
I am getting the following error message on myserver.log: (I deleted the port and ip)
<Unable to connect to a remote server on address ### and port ###
with protocol t3. The Exception is java.net.ConnectException: Connection refused>
I have seen a post that implied that there is a bug in WL7.0 , but I am not sure that this is the case.
When the JMS queues are on the same server .i.e WL7.0 to WL7.0 it is fine.
Can anyone help ?There could be compatibility issues. Refer to "WebLogic Server Compatibility".
Link: [http://download.oracle.com/docs/cd/E12839_01/web.1111/e14529/compatibility.htm#INRMP118]
Are you using a JMS bridge between the two domains?
Edited by: Manish Chellappan on Sep 3, 2009 3:35 PM -
DB connection pooling to remote server, pls help!
Hi guys,
I really need help with this and I am not exactly the most experienced developer.
I have a java application which connects to a remote MS SQL server using the connection pooling object model described in Sun docs at:
http://java.sun.com/developer/onlineTraining/Programming/JDCBook/conpool.html
I am Using the 'sun.jdbc.odbc.JdbcOdbcDriver' driver.
In the client class (DAO) in a static { try{} } block I create the JDCConnectionDriver and JDCConnectionPool. Then in the constructor of this class I instantiate the connection object, which I use through out the class.
This class is instantiated multiple times in the lifetime of the application( thus the static block for the connection pool).
It all works great if the SQL server is on the same machine. But as soon as I change the ODBC connection to a remote server, my application does not seem to release the connections. After several hundred instantiations of the client DAO class there are so many ports taken (live connections) on my server that it affects other applications.
Does the garbage collector fail or does it fail when it works with the MS ODBC driver with remote connection?
I debuged and debuged both with local sql and remote -- the workflow seems the same.
Has anybody out there faced the same problem? What am I doing wrong? How can I resolve this?
You help is greatly appriciated!
StanI am using the datasource very heavely, but I am sure
the closing/releasing is ok. If the sql server is on
the same machine, it all works flawlessly. Only when
sql is remote I see unclosed connections, which pile
up as I am creating more and more.
Any suggestion?Your description seems to indicate that you are not actually closing the connections by calling the close() method. Make sure that you close the connection when the task at hand is finished. Closing only makes the connection in the pool available again.
Also, if you are using datasource heavily, you should be attempting to minimize the lookups. JNDI lookups are relatively slow.
Maybe you are looking for
-
I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my ro
-
Can I set the dreamweaver ftp-application to show megabytes instead of bytes?
Hi! At the moment the ftp-uploader in Dreamweaver is showing bytes when I put or get files from my site. This can be a bit confusing especially with larger files, as the numbers will easily get huge. Is there a way to view the upload/download progres
-
Songs Not Copying to the IPhone
I get the message, "A song was not copied to my IPhone because I am not autorized to play it on my computer." In all cases, these are songs that I've purchassed through Itunes. How do I correct this?
-
Anyone have trouble sending Pages documents as attachments in Gmail? It seems to not want to send these. It just waits and waits. Best E
-
Dear all, I have checked in help portal regarding direct production, Can anybody explain with example how to process it. Because in help portal it has mention goods issue and receipt not necessary. Then how the material will take in MRP? Difference b