I am connected to my wireless network but cannot access the internet. Any ideas?

Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Similar Messages

IPod touch connects to our wi-fi but cannot access the internet. It functions fine using other wi-fi at other locations just not ours at home. We have 2 other iPods in the house that use ours fine, with no issues....

I have done all the troubleshooting from the support page. The ipod shows that it is connected to our wi-fi and sometimes even shows the ip addresses but it wont let us connect to the internet/itunes store etc... the other ipods in the house use the wi-fi with no issues and this ipod is able to connect to public wi-fi and other location wi-fis and access the internet with no problems. What else do I do?

luvlabs
Thank you for your reply. I have tried your suggestion. Emmm I have an AirLive router, there are so many wires o.O I don't know which one to plug out. I think it is the yellow one which says WAN? But I wasn't so sure. So I tried plugging out each wire and followed your instructions. Sorry, but it didn't work I'm going mad xD! I even tried re-doing your instructions on WAN wire, and it didn't work.
Hmm according to step 4 (Log back into your network using Settings > WiFi > Other. Re-enter your network name (SSID), security, and network password.)
My network name is already available in the list. So I didn't need to do that. Or is it neccesary?
Thanks a bunch! Reply soon
Message was edited by: carmenc23

I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions.

I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!

I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!

If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password.

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

IPhone connected to Apple Wireless Extreme but cannot access Internet

I have the Apple Wireless Extreme that I use to connect my MacBook Pro online, and for some reason the iPhone cannot access the Internet. I can connect to the base station, but can't go online - it's getting an IP address and I can see the DNS server addresses. I have tried no security, WEP, WPA and WPA 2 with no luck. I have to resort to connecting to someone elses wireless network so I can go online with the iPhone.
Any ideas?

I have an Airport Extreme base station using WPA2 Personal encryption for my wireless network without MAC filtering, and I connect with my network with no problems.
How many characters is your password when using WPA2 Personal encryption?
I would also try resetting your wireless network.
Power your MB and your iPhone off.
Power your Airport Extreme Base Station off, and then your modem.
Wait several minutes and then reverse the process.
Power your modem on allowing it to completely reset and connect.
Power your Airport Extreme Base Station on, allowing it to reset with the modem.
Power your iPhone on and try connecting to your wireless network.

Equium P200-1IR - Wireless is connected but cannot access the internet

Hi ya,
Need a little help!!
I have just bought an Equium P200-1IR.
I have turned the wi fi on.
I can see my router which is Talk Talk.
I can get the laptop to connect to the router and it says that I am connected,
however I cannot access the internet.
I tried the same process by inserting a wi fi dongle into the USB port
on the laptop and exactly the same happens.
We have other computers in the house that connect to the router and internet
ok using the wireless dongle.
I have plugged a hard wire connection from the laptop to the router and I can
access the internet immediately with no problems, however would love
to use the wireless feature.
Any help really appreciated....Thanks
Waynec

Do you use the right channel and right encryption settings?
This should be checked!
It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
How about WLan driver update? Did you update the WLan driver? If not do that!

I have connected to Wifi on my ipad, but cannot access the internet

I am trying to connect my ipad to a wifi network at my work so I can access the internet. It connects to the network fine, but I can't get on the internet. I'm not sure what info you need in order to help me, so please let me know, and I will provide you with what I can! Thanks.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have a Mac OS X 10.6.7 and Firefox 4. Other browser are easily connecting to the net but Firefox. It keep trying to connect to my wireless network but not doing the job. Please give some advice..

This happens when I first start the computer. Sometimes it connects to the wireless network, and during the day is fine.

user8744713 wrote:
I have downloaded Instant Client libraries (basic, SDK and SQL files, named instantclient-basic-10.2.0.4.0-macosx-x64.zip , instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip and instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip ) to Mac OS X 10.6.2 server and unzipped them as instructed in the manual here: http://download.oracle.com/docs/cd/B19306_01/install.102/e12121/inst_task.htm#BABJGGJH
Manual then instructs to run runInstaller command. This command however is not being recognized by the system (' No such file or directory' error is thrown) which to my opinion means one of two things: either command is misspelled in the manual or the command file that runs it is missing. I tried it with or without a dot and slash and in small case letters, nothing works.
When I installed similar libraries on Linux I had no problems but all was required there was to place libraries in the proper directory, no command was required.
Maybe same can be done here as well but I am not sure where to place some of the files. I see .h files that should go to /usr/include but see no .so files that on Linux go to /usr/lib. There are some files with .dylib and other .*lib extensions but I'm not sure if they should be copied to /usr/lib or not. And then there are some other files I have no idea what to do with.
Please help!!!No, you can't just drop a few files into a directory and have a working installation (well, I guess technically you could. But technically you could bail all the water out of Lake Superior with a teacup ...)
Sounds like you've covered PATH and current directory issues. What about permissions? What OS account are you using for this installation? (you should have created an account called "oracle" and made it's primary group "dba"). Does that account have execute permissions?
>
Thanks in advance!
Edited by: user8744713 on Mar 26, 2010 10:17 AM

Iphone connects to secured wifi network but cant surf the internet

I am trying to connect to the wifi at the office, it's a 64 bit WEP secured network (I enter a 10 character hex key). The Iphone connects to the network and is assigned a valid IP address. But when I try www.google.com or 64.233.167.99 for example, it fails with 'Safari could not open the page because the server stopped responding'.
It all works fine at home on my non secured wifi network.
Please, can someone help? Thanks.

Are you 100% sure the WiFi at your work has access to get out...and also, I assume they know you are getting on it. Not sure what type of office you are at (eg: large business with network support/admin or at a small office where you or somebody right there set it up).
But if large office with network admin...could be they locked it down with MacAddresses as well.

Connected to home network, but cannot access internet on ipad

I have got strong signal on home network but cannot access the internet. Tried resets, etc

It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

MacBook Pro sees wireless networks but cannot join any. Connection timeout error

I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
Internet access via ethernet cable works just fine.

It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area.

My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?

What am I missing here. I'm sure it is some kind of sitting that is not right.
Thanks Pat

Sounds familiar:
lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?
Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?in response to Patricia Isaac1
Power off and then back on the router
What happens when you enter the network's PW?
Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
Csound1 wrote:
Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

I am connected to my wireless network but cannot access the internet. Any ideas?

Similar Messages

Maybe you are looking for