I am constantly getting a grey shading over my computer, then multi-language message to restart computer

I have an iMac 2.66 GHz Intel Core 2 Dueo running 10.6.8  This is now happening constantly!!! Please help:(
Here's an example of the error report when I restart:
Interval Since Last Panic Report:  270695 sec
Panics Since Last Report:          1
Anonymous UUID: AD76F81C-5556-4213-A667-6796EFDF00DB
Wed Sep 18 19:08:12 2013
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x58733290, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x000000a8, CR3: 0x62ba4000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x4afc96c0, ECX: 0x09a43000, EDX: 0x00000000
CR2: 0x000000a8, EBP: 0x6da22908, ESI: 0x00000009, EDI: 0x09a43000
EFL: 0x00010246, EIP: 0x58733290, CS:  0x00000008, DS:  0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x6da226e8 : 0x21b837 (0x5dd7fc 0x6da2271c 0x223ce1 0x0)
0x6da22738 : 0x2abf6a (0x59e3d0 0x58733290 0xe 0x59e59a)
0x6da22818 : 0x2a1a78 (0x6da22830 0x0 0x6da22908 0x58733290)
0x6da22828 : 0x58733290 (0xe 0x48 0x10 0x10)
0x6da22908 : 0x587ac76b (0x42de9000 0x43051000 0x43126000 0x9b306c0)
0x6da22958 : 0x587ac314 (0x43051000 0x42e04d20 0x6da229f8 0x81)
0x6da22978 : 0x58740c46 (0x43051000 0x97cc000 0x6da229d0 0x100000)
0x6da22ab8 : 0x5877a5d8 (0x43051000 0x1 0x6da22bcc 0x6da22bc8)
0x6da22b68 : 0x5873cfe1 (0x43051000 0x1 0x6da22bcc 0x6da22bc8)
0x6da22be8 : 0x56da06 (0x43051000 0x0 0x6da22e3c 0x6da22c74)
0x6da22c38 : 0x56e2a5 (0x587cb720 0x43051000 0xa0bb988 0x1)
0x6da22c88 : 0x56eb59 (0x43051000 0x10 0x6da22cd0 0x0)
0x6da22da8 : 0x286638 (0x43051000 0x10 0xa0bb988 0x1)
0x6da23e58 : 0x21dbe5 (0xa0bb960 0x72455a0 0x1fa1f8 0x10feb)
0x6da23e98 : 0x210a86 (0xa0bb900 0x0 0x9022310 0xa53d930)
0x6da23ef8 : 0x216f84 (0xa0bb900 0x0 0x0 0x0)
0x6da23f78 : 0x295c57 (0x92a0068 0x0 0x0 0x0)
0x6da23fc8 : 0x2a256d (0x92a0064 0x7fff 0x10 0x92a0064)
      Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.3.6)@0x58731000->0x587e7fff
dependency: com.apple.NVDAResman(6.3.6)@0x591f0000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x512e4000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x5123a000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x58449000
BSD process name corresponding to current thread: firefox
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac9,1 (Mac-F2218FC8)
System uptime in nanoseconds: 159735199163807
unloaded kexts:
(none)
loaded kexts:
com.nielsen.kext.nielsennke            1.1.1
com.nielsen.driver.NielsenAudioDriver            1.1.1
com.manycamllc.driver.ManyCamDriver            0.0.7
com.seagate.driver.PowSecLeafDriver_10_5            5.1.1
com.seagate.driver.PowSecLeafDriver_10_4            5.1.1
com.seagate.driver.PowSecDriverCore            5.1.1
com.apple.filesystems.msdosfs            1.6.3 - last loaded 59572976539068
com.apple.driver.AppleHWSensor            1.9.3d0
com.apple.filesystems.autofs            2.1.0
com.apple.driver.AppleTyMCEDriver            1.0.2d2
com.apple.driver.AGPM            100.12.31
com.apple.driver.InternalModemSupport            2.6.2
com.apple.driver.AudioAUUC            1.57
com.apple.driver.AppleMikeyHIDDriver            1.2.0
com.apple.driver.AppleIntelYonahProfile            14
com.apple.driver.AppleUpstreamUserClient            3.5.7
com.apple.Dont_Steal_Mac_OS_X            7.0.0
com.apple.driver.AppleMikeyDriver            2.0.5f14
com.apple.driver.AppleHDA            2.0.5f14
com.apple.driver.AppleIntelPenrynProfile            17
com.apple.driver.AppleMCCSControl            1.0.20
com.apple.driver.AppleGraphicsControl            2.10.6
com.apple.driver.AudioIPCDriver            1.1.6
com.apple.nvenet            2.0.17
com.apple.driver.AirPortBrcm43xx            423.91.27
com.apple.driver.AppleIntelNehalemProfile            11
com.apple.driver.AppleLPC            1.5.1
com.apple.driver.AppleBacklight            170.0.46
com.apple.GeForce            6.3.6
com.apple.driver.AirPortBrcm43224            428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin            4.7.0a1
com.apple.driver.AppleIntelMeromProfile            19
com.apple.driver.AppleIRController            303.8
com.apple.iokit.SCSITaskUserClient            2.6.8
com.apple.iokit.IOAHCIBlockStorage            1.6.4
com.apple.BootCache            31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib            1.0.0d1
com.apple.driver.AppleEFINVRAM            1.4.0
com.apple.driver.AppleUSBHub            4.2.4
com.apple.driver.AppleFWOHCI            4.7.3
com.apple.driver.AppleAHCIPort            2.1.7
com.apple.driver.AppleUSBEHCI            4.2.4
com.apple.driver.AppleUSBOHCI            4.2.0
com.apple.driver.AppleRTC            1.3.1
com.apple.driver.AppleHPET            1.5
com.apple.driver.AppleACPIButtons            1.3.6
com.apple.driver.AppleSMBIOS            1.7
com.apple.driver.AppleACPIEC            1.3.6
com.apple.driver.AppleAPIC            1.4
com.apple.driver.AppleIntelCPUPowerManagementClient            142.6.0
com.apple.security.sandbox            1
com.apple.security.quarantine            0
com.apple.nke.applicationfirewall            2.1.14
com.apple.driver.AppleIntelCPUPowerManagement            142.6.0
com.apple.driver.AppleProfileReadCounterAction            17
com.apple.driver.AppleProfileTimestampAction            10
com.apple.driver.AppleProfileThreadInfoAction            14
com.apple.driver.AppleProfileRegisterStateAction            10
com.apple.driver.AppleProfileKEventAction            10
com.apple.driver.AppleProfileCallstackAction            20
com.apple.iokit.IOSurface            74.2
com.apple.iokit.IOBluetoothSerialManager            2.4.5f3
com.apple.iokit.IOSerialFamily            10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver            2.0.5f14
com.apple.driver.DspFuncLib            2.0.5f14
com.apple.iokit.IOAudioFamily            1.8.3fc2
com.apple.kext.OSvKernDSPLib            1.3
com.apple.driver.AppleSMBusController            1.0.10d0
com.apple.driver.AppleHDAController            2.0.5f14
com.apple.iokit.IOHDAFamily            2.0.5f14
com.apple.nvidia.nv50hal            6.3.6
com.apple.driver.AppleBacklightExpert            1.0.1
com.apple.NVDAResman            6.3.6
com.apple.iokit.IONDRVSupport            2.2.1
com.apple.iokit.IOGraphicsFamily            2.2.1
com.apple.iokit.IO80211Family            320.1
com.apple.driver.NVSMU            2.2.7
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI            1.0.10d0
com.apple.iokit.IOFireWireIP            2.0.3
com.apple.iokit.IONetworkingFamily            1.10
com.apple.driver.AppleSMC            3.1.0d5
com.apple.iokit.AppleProfileFamily            41
com.apple.driver.BroadcomUSBBluetoothHCIController            2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController            2.4.5f3
com.apple.iokit.IOBluetoothFamily            2.4.5f3
com.apple.driver.AppleUSBHIDKeyboard            141.5
com.apple.driver.AppleHIDKeyboard            141.5
com.apple.iokit.IOUSBHIDDriver            4.2.0
com.apple.iokit.IOUSBMassStorageClass            2.6.7
com.apple.driver.AppleUSBMergeNub            4.2.4
com.apple.driver.AppleUSBComposite            3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice            2.6.8
com.apple.iokit.IOBDStorageFamily            1.6
com.apple.iokit.IODVDStorageFamily            1.6
com.apple.iokit.IOCDStorageFamily            1.6.1
com.apple.driver.XsanFilter            402.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport            2.1.0
com.apple.iokit.IOFireWireSBP2            4.0.6
com.apple.iokit.IOSCSIBlockCommandsDevice            2.6.8
com.apple.iokit.IOAHCISerialATAPI            1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily            2.6.8
com.apple.driver.AppleFileSystemDriver            2.0
com.apple.iokit.IOUSBUserClient            4.2.4
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOAHCIFamily            2.0.6
com.apple.iokit.IOUSBFamily            4.2.4
com.apple.driver.AppleEFIRuntime            1.4.0
com.apple.iokit.IOHIDFamily            1.6.6
com.apple.iokit.IOSMBusFamily            1.1
com.apple.security.TMSafetyNet            6
com.apple.kext.AppleMatch            1.0.0d1
com.apple.driver.DiskImages            289.1
com.apple.iokit.IOStorageFamily            1.6.3
com.apple.driver.AppleACPIPlatform            1.3.6
com.apple.iokit.IOPCIFamily            2.6.5
com.apple.iokit.IOACPIFamily            1.3.0
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.37f3
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD6400AAKS-40H2B0, 596.17 GB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000 / 3
USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0x24300000 / 2
USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52b, 0x24330000 / 5
USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0x24320000 / 4
USB Device: HP LaserJet P1006, 0x03f0  (Hewlett Packard), 0x3e17, 0x26400000 / 3
USB Device: FA GoFlex Desk, 0x0bc2  (Seagate LLC), 0x5071, 0x26200000 / 2
USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000 / 5

I spoke to Seagate & they had me remove a folder under applications & restart.  They did not come back, BUT it happened again last night.  I'm still waiting to hear back from Nielsen (should be today), but do you see anything else in this latest report?  THANK YOU
Interval Since Last Panic Report:  93281 sec
Panics Since Last Report:          1
Anonymous UUID: AD76F81C-5556-4213-A667-6796EFDF00DB
Tue Nov 19 08:42:05 2013
panic(cpu 1 caller 0x2abf6a): Kernel trap at 0x00c6ca61, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000010, CR3: 0x00100000, CR4: 0x00000660
EAX: 0xffffffff, EBX: 0x00000027, ECX: 0x00000009, EDX: 0x00000010
CR2: 0x00000010, EBP: 0x76033b28, ESI: 0x448c0000, EDI: 0x090ed210
EFL: 0x00010202, EIP: 0x00c6ca61, CS:  0x00000008, DS:  0x00000010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x76033918 : 0x21b837 (0x5dd7fc 0x7603394c 0x223ce1 0x0)
0x76033968 : 0x2abf6a (0x59e3d0 0xc6ca61 0xe 0x59e59a)
0x76033a48 : 0x2a1a78 (0x76033a60 0x0 0x76033b28 0xc6ca61)
0x76033a58 : 0xc6ca61 (0xe 0x8ed0048 0x10 0x500010)
0x76033b28 : 0xca4341 (0x448c0000 0x444af000 0x1 0x888fb00)
0x76033b78 : 0xc676dd (0x448c0000 0x444af000 0x76033bb8 0x1d)
0x76033b98 : 0x571dcd (0x448c0000 0x860134 0x76033be8 0x0)
0x76033bb8 : 0x284f15 (0x448c0000 0x9577af0 0x1d 0x76033be8)
0x76033c08 : 0x21dbfc (0xb048498 0xaa385a0 0xc 0x210614)
0x76033c48 : 0x210a86 (0xb048400 0x12 0x76033ca8 0x20f4ae)
0x76033ca8 : 0x21e0cb (0xb048400 0x10000 0x0 0x221eeb)
0x76033cd8 : 0x23ff7b (0x76033cfc 0x24 0x149da244 0x149da238)
0x76033d28 : 0x215256 (0x9577af0 0x1 0x1 0x221eeb)
0x76033d78 : 0x215868 (0x850dc94 0xf18f 0x44797f10 0x94997d0)
0x76033db8 : 0x22ca4d (0x850dc94 0x911c6c0 0x76033e08 0x480e5d)
0x76033e08 : 0x481892 (0x94997d0 0xf 0x0 0x92623d4)
0x76033e58 : 0x48d017 (0x9441540 0xf 0x0 0x9441650)
0x76033ec8 : 0x48fec0 (0xf 0x0 0x76033ee8 0x847e40)
0x76033ef8 : 0x219432 (0x92623d4 0xffffff7f 0x1 0x4ee0b54)
0x76033f38 : 0x2ab89f (0xffffffff 0x1 0x1 0x1)
0x76033fc8 : 0x2a18da (0x8e48204 0x1 0x10 0x8e48204)
      Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.3.6)@0xc5c000->0xd12fff
dependency: com.apple.NVDAResman(6.3.6)@0x96e000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
BSD process name corresponding to current thread: firefox
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac9,1 (Mac-F2218FC8)
System uptime in nanoseconds: 45519602165428
unloaded kexts:
(none)
loaded kexts:
com.nielsen.kext.nielsennke            1.1.1 - last loaded 35553177663
com.nielsen.driver.NielsenAudioDriver            1.1.1
com.seagate.driver.PowSecLeafDriver_10_5            5.1.1
com.seagate.driver.PowSecLeafDriver_10_4            5.1.1
com.seagate.driver.PowSecDriverCore            5.1.1
com.apple.driver.AppleHWSensor            1.9.3d0
com.apple.filesystems.autofs            2.1.0
com.apple.driver.AppleTyMCEDriver            1.0.2d2
com.apple.driver.InternalModemSupport            2.6.2
com.apple.driver.AGPM            100.12.31
com.apple.driver.AppleHDA            2.0.5f14
com.apple.driver.AppleMikeyHIDDriver            1.2.0
com.apple.driver.AppleUpstreamUserClient            3.5.7
com.apple.driver.AppleMCCSControl            1.0.20
com.apple.driver.AudioAUUC            1.57
com.apple.driver.AppleMikeyDriver            2.0.5f14
com.apple.Dont_Steal_Mac_OS_X            7.0.0
com.apple.driver.AudioIPCDriver            1.1.6
com.apple.driver.AppleIntelYonahProfile            14
com.apple.driver.AppleIntelPenrynProfile            17
com.apple.driver.AppleIntelNehalemProfile            11
com.apple.driver.AppleIntelMeromProfile            19
com.apple.driver.ACPI_SMC_PlatformPlugin            4.7.0a1
com.apple.GeForce            6.3.6
com.apple.driver.AppleLPC            1.5.1
com.apple.driver.AppleGraphicsControl            2.10.6
com.apple.driver.AppleBacklight            170.0.46
com.apple.driver.AppleIRController            303.8
com.apple.iokit.SCSITaskUserClient            2.6.8
com.apple.iokit.IOAHCIBlockStorage            1.6.4
com.apple.driver.AppleUSBHub            4.2.4
com.apple.driver.AppleFWOHCI            4.7.3
com.apple.driver.AppleAHCIPort            2.1.7
com.apple.BootCache            31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib            1.0.0d1
com.apple.nvenet            2.0.17
com.apple.driver.AirPortBrcm43xx            423.91.27
com.apple.driver.AirPortBrcm43224            428.42.4
com.apple.driver.AppleUSBEHCI            4.2.4
com.apple.driver.AppleEFINVRAM            1.4.0
com.apple.driver.AppleRTC            1.3.1
com.apple.driver.AppleUSBOHCI            4.2.0
com.apple.driver.AppleHPET            1.5
com.apple.driver.AppleACPIButtons            1.3.6
com.apple.driver.AppleSMBIOS            1.7
com.apple.driver.AppleACPIEC            1.3.6
com.apple.driver.AppleAPIC            1.4
com.apple.driver.AppleIntelCPUPowerManagementClient            142.6.0
com.apple.security.sandbox            1
com.apple.security.quarantine            0
com.apple.nke.applicationfirewall            2.1.14
com.apple.driver.AppleIntelCPUPowerManagement            142.6.0
com.apple.driver.AppleHDAHardwareConfigDriver            2.0.5f14
com.apple.driver.DspFuncLib            2.0.5f14
com.apple.driver.AppleProfileReadCounterAction            17
com.apple.driver.AppleProfileTimestampAction            10
com.apple.driver.AppleProfileThreadInfoAction            14
com.apple.driver.AppleProfileRegisterStateAction            10
com.apple.driver.AppleProfileKEventAction            10
com.apple.driver.AppleProfileCallstackAction            20
com.apple.nvidia.nv50hal            6.3.6
com.apple.iokit.IOFireWireIP            2.0.3
com.apple.iokit.IOSurface            74.2
com.apple.iokit.IOBluetoothSerialManager            2.4.5f3
com.apple.iokit.IOSerialFamily            10.0.3
com.apple.iokit.IOAudioFamily            1.8.3fc2
com.apple.kext.OSvKernDSPLib            1.3
com.apple.driver.AppleHDAController            2.0.5f14
com.apple.iokit.IOHDAFamily            2.0.5f14
com.apple.driver.AppleSMBusController            1.0.10d0
com.apple.iokit.AppleProfileFamily            41
com.apple.driver.AppleSMC            3.1.0d5
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI            1.0.10d0
com.apple.NVDAResman            6.3.6
com.apple.driver.AppleBacklightExpert            1.0.1
com.apple.iokit.IONDRVSupport            2.2.1
com.apple.iokit.IOGraphicsFamily            2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController            2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController            2.4.5f3
com.apple.iokit.IOBluetoothFamily            2.4.5f3
com.apple.driver.AppleUSBHIDKeyboard            141.5
com.apple.driver.AppleHIDKeyboard            141.5
com.apple.iokit.IOUSBHIDDriver            4.2.0
com.apple.iokit.IOUSBMassStorageClass            2.6.7
com.apple.driver.AppleUSBMergeNub            4.2.4
com.apple.driver.AppleUSBComposite            3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice            2.6.8
com.apple.iokit.IOBDStorageFamily            1.6
com.apple.iokit.IODVDStorageFamily            1.6
com.apple.iokit.IOCDStorageFamily            1.6.1
com.apple.iokit.IOAHCISerialATAPI            1.2.6
com.apple.driver.XsanFilter            402.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport            2.1.0
com.apple.iokit.IOFireWireSBP2            4.0.6
com.apple.iokit.IOSCSIBlockCommandsDevice            2.6.8
com.apple.iokit.IOSCSIArchitectureModelFamily            2.6.8
com.apple.iokit.IOUSBUserClient            4.2.4
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOAHCIFamily            2.0.6
com.apple.driver.AppleFileSystemDriver            2.0
com.apple.iokit.IO80211Family            320.1
com.apple.iokit.IONetworkingFamily            1.10
com.apple.driver.NVSMU            2.2.7
com.apple.driver.AppleEFIRuntime            1.4.0
com.apple.iokit.IOUSBFamily            4.2.4
com.apple.iokit.IOHIDFamily            1.6.6
com.apple.iokit.IOSMBusFamily            1.1
com.apple.kext.AppleMatch            1.0.0d1
com.apple.security.TMSafetyNet            6
com.apple.driver.DiskImages            289.1
com.apple.iokit.IOStorageFamily            1.6.3
com.apple.driver.AppleACPIPlatform            1.3.6
com.apple.iokit.IOPCIFamily            2.6.5
com.apple.iokit.IOACPIFamily            1.3.0
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.37f3
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD6400AAKS-40H2B0, 596.17 GB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000 / 3
USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0x24300000 / 2
USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52b, 0x24330000 / 5
USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0x24320000 / 4
USB Device: HP LaserJet P1006, 0x03f0  (Hewlett Packard), 0x3e17, 0x26400000 / 3
USB Device: FA GoFlex Desk, 0x0bc2  (Seagate LLC), 0x5071, 0x26200000 / 2
USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000 / 4
USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2

Similar Messages

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • When i try to upgrade to ff8 i keeping getting a message to restart my computer which i have done 5 or 6 times and that message keeps coming up can u help please. Also when i go to remove the download i get the message to restart computer in English

    cannot open Fire fox i keep getting a message to restart my Computer but that does not do anything i still cannot open Fire fox this has happened about 5 0r 6 times

    Try to run the Firefox program once as Administrator (right-click: Run as Administrator).
    If that doesn't solve the problem then remove the Firefox program folder to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Uninstall your current Firefox version if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • G5 Dual 2.5 gets to grey apple screen... then locks !

    power supply is good, running through a APC power backup. power button & light come on. video comes on. everything is disconnected except for original keyboard & mouse & monitor.
    it gets to the grey apple start up screen... then LOCKS. the little spinning 'flower' never shows up. then the fans slowly increase.
    i have to hold down the power button for 5 seconds to shut-down. i've tried keyboard startup tricks, but the power to the keyboard & mouse seem to get CUT... i can't even boot from a CD.
    going to try to replace the lithium battery first.
    any other suggestions ??
    powermac G5   Mac OS X (10.4.7)  

    You may be able to open the drive and boot from the system disc if you hold down the mouse button on restart. If this doesn't work, slide down the silver optical drive gate and insert a strong, straightened paper clip in the emergency eject hole shown in Figure 3 here (you don't have to remove the drive)(it is a mechanical release, so you will have to slide the tray out by hand)
    http://docs.info.apple.com/article.html?artnum=88215

  • For the last 2 days firefox will not start on my mac desktop have to force quit several times, getting 'not responding' message, already restarted computer 3 times plus reuploaded firefox from safari and deleted old, what is wrong?

    can't start firefox, keeps getting stuck have 'no response' have to force quit on my mac

    Hmmmm, http://www.seattlepi.com/ loads fine hear in 10.4.11, FF 3.6.8, but I do see it uses some kind of Flash.
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    You should also consider the Shockwave Player, which displays Web content that has been created by Adobe Director, much used for multimedia: For PPC Macs:  http://get.adobe.com/shockwave/
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html
    Then Test Adobe Shockwave & Flash Players...
    http://www.adobe.com/shockwave/welcome/

  • I had an iTunes account on a computer then my dad threw out that computer cause he got a new one and now i can't figure out how to connect my iTouch to iTunes to get new songs

    My ipod touch won't download anything ill tap download then it'll leave the app then ask for my password after i type my password it says "enter your [?] and password then tap security info and answer the Qs" then ill tap okay and it'll say the same thing

    Try resetting your passwords and/or security questions.
    iTunes Store: Retrieving and changing passwords (Apple ID)
    See Kappy's previous discussion.
    HT5312 How to recover security...: Apple Support Communities

  • HT4061 My iphone says it needs to be activated but it will not activate- says connect to itunes but then I get activation server not available. itunes gave me an error message on my computer that it was missing some file so I uninstalled but now it wont r

    cannot reinstall itunes either now please help

    Hello there, bkorhummel.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    If the issue with the iPhone persists after the reinstall of iTunes, the following article may prove useful:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Start Up won't get past grey Apple screen

    Trying to start my computer for first time in 6 days. When turning on it gets to Grey Apple logo screen and then a bar appears underneath, the bar doesn't fill and then the computer powers down. Please help.

    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    If you make it to the desktop, repair permissions-http://docs.info.apple.com/article.html?artnum=25751

  • I'm getting a pop-up that tells me to go to Store Authorize this computer.  When I get to the store, where is the tab to authorize this computer?

    I am getting a pop-up that says the computer is not authorized and instructs me to go to Store>Authorize Computer, where in the store is the tab to authorize the computer?

    I authorized the computer, got a message saying the computer was already authorized.  The I connected my iPhone to the computer and got a message saying the computer was not authorized, that I needed to go thru the previous stps to authorize.  iTunes is giving me conflicting directions.  How doi I resolve that?

  • When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

    3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
    Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
    On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
    Can somebody advise me on this matter. Thanks in advance

    You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
    If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive. 
    You can also boot into Safe mode
    To start up into Safe Mode (to "Safe Boot"), do this:
       1. Be sure the computer is shut down.
       2. Press the power button.
       3. Immediately after you hear the startup tone, press and hold the Shift key.
          Tip: The Shift key should be held as soon as possible after the startup tone but not before.
       4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    Please post back with results,
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

  • Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

    My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.  I've tried Option key, and Control S keys and it still will not boop up.  Can anyone help?

    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • Re iphoto: when I double click on a thumbnail i get e grey screen with exclamation mark..can't access my photos to edit, order prints etc

    Was wondering if anyone can help...I am not very computer friendly but want to be able to edit my photos, use them as jpegs, order prints etc. When I double click on a thumbnail ( am presuming the thumbnails are the small photos ) I get a grey screen with an exclamation mark on it. I cannot drag the thumbnail onto the desk top it just pings back. This doesn't happen with all the thumbnails and has been a problem since we upgraded to snowleopard. I recently reinstalled photos from the memory card from my camera and they are alright. I am presuming that the old photos are stuck in there somewhere if only I knew the right buttons to press to get them out. Thanks, Jane Thomas

    Easiest: Restore from your back up.
    Otherwise:
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • MBP - screen is grey-shaded and it is not possible to click on any link. Any ideas why and how to solve this problem?

    So, only on certain web pages, eg newspapers on-line, the screen appears grey-shaded. It is just possible to read the content. But I cannot click on any links. And sometimes the screen opens at the bottom of the page.

    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • I LOADED NEW HARD DRIVE IN MY MAC PRO AND NOW I'M GETTING A GREY SCREEN!

    I REMOVED MY 160GIG HARD DRIVE OUT OF MY MACBOOK PRO AND REPLACED IT WITH A 320GIG NOW WHEN I GO TO LOAD MAC OS X DISC I GET A GREY SCREEN THAT READS CAN'T FIND DRIVER! CAN SOMEONE PLEASE TELL ME WHAT YOU THINK THE PROBLEM IS OR WHAT I SHOULD DO NEXT.

    Did the computer ship originally with a Tiger 10.4.x system, and was the Snow Leopard 10.6
    disc used to upgrade the OS from 10.4 to 10.6? Or are you using a Leopard 10.5 disc?
    Sometimes an error can result when reinstalling a later OS in a computer that had been
    running an older computer, when the former setup had seen a firmware update. And in
    a few other situations, if 10.5 was skipped, and OS 10.4 to 10.6 was the path, a few users
    had noted problems later on. Since you did not note if the computer was new enough to
    have shipped with Snow Leopard (thus perhaps had AppleCare plan coverage, too) these
    other questions arise to find those details.
    There is some conflicting (or missing information) in your posts; just enough
    to see the problem may be in what you have and how you are using it.
    Is the latest software version you have a full retail version of the OS X, or was it an upgrade
    disc (such as the low-cost upgrade for Snow Leopard) used over an older 10.4 OS X version?
    Was a firmware update performed on the computer with the other installation of this software
    before you replaced the hard disk drive? Sometimes a firmware update to the logicboard may
    cause a problem in later installs of an older OS X than the last one the firmware update was for.
    If there were jumper pins to be set specific to use it correctly in this computer, before installing the
    new hard disk drive, and if they were not set accordingly, the computer may not see an install disc
    or be able to use the disc to install an OS X. Other difficulties may result, if not immediately.
    There are details missing in this discussion which may pertain to the outcome.
    {And I pointed out your new thread on this same topic to forum moderators, since
    you already had this one with replies; as duplicate questions are often not helpful.
    That was in the Tiger 10.4 discussions area.}
    Good luck & happy computing!
    { edited }

  • How do I convert a color jpg to a pure black and white jpg with no grey/shading?

    how do I convert a color jpg to a pure black and white jpg with no grey/shading using Automator?

    Hi mns579,
    Thanks for your swift reply.
    I'm afraid that sequence leads to a burn-out of some of the black text, making it unreadable.
    To clarify, what I did was photograph pages from a book.  The interior lighting of the room where I photographed these pages leads to a jpg image with slight graying or shading of parts of the page.  So when I simply convert it to B/W, I get a washing out of some areas of the page where there is text, and this makes it unreadable.
    I know that some software programs have a feature that allows a color jpg to be converted to b/w such that the text is made pure black and any surrounding areas of the text are made pure white (ie, all color is removed from the non-black areas), which makes for an easily readable b/w text page.  Am I able to do this with my Mac, and if so, how using the Automator feature?
    (I have more than 50 jpgs that I would like to clean up in this manner, hence the ability to do so through Automator is important.)
    Thanks for your attention to this.

Maybe you are looking for

  • Interface on asa.

    Hi , I have connected a firewall inside interface to l3 switch. on l3 switch int gi0/1 no switchport ip address 192.168.10.1 255.255.255.0 no shut     on firewall int gi0/1 nameif inside security level 100 ip address 192.168.10.2 255.255.255.0 If i p

  • How to upload above20000 records csv files into oracle table,Oracle APEX3.2

    Can any one help me how to CSV upload more than 20,000 records using APEX 3.2 upload process.i am using regular upload process using BOLB file SELECT blob_content,id,filename into v_blob_data,v_file_id,v_file_name FROM apex_application_files WHERE la

  • Read Navigational Attribute from Mulitprovider

    Hi Gurus, I need to read a navigational attribute from the Multiprovider in the user exit.  Could you please tell me in detail with coding how to do this ?

  • Authentication in weblogic 5.1

    Hi all, I have the following requirements. I have an application which asks for the authentication information like username and password at first. The application is running in weblogic5.1 server. Is there a way where in weblogic.properties file, i

  • Http headers, http receiver adapter

    Hello, I have a scenario SAP -> RFC -> XI -> HTTPREQUEST -> webserver SAP <- RFC <- XI <- HTTPRESPONSE <- -""- I need to read a http header in the httpresponse. How can that be done? Anyone has an example? Best regards /Otto