I am copying audiobooks on CD to the iTunes, so that I can send them to my iPod, however I do not know how to keep all the disks that comprise a book ( sometimes up to 18 disks ) organized so that they are recognized as part of abook and played in sequenc

I guess I asked the question in the title, anyway one more time:I am copying audiobooks on multiple CDs to Itunes so that I can sync them to an Ipod and listen to them, how do I keep the multiple disks inone folder under one book title and how do I keep the tracks from intermingling with the tracks from another disk?  EXAMPLE: I just downloaded one book, consisting of three CDs and I see the Track o1 information from each CD in sequence followed by three Track 02, instead of all tarcks from the first CD followed by the tracks of the next CD etc.

Thank you, I read that lengthy procedure before I asked the question.
I have no way of following all of those steps successfully since I am about butterfingered a sthe last dinosaur and will make every  mistake in the world and get frustrated with  something that SHOULD be simple.
I have the three disk autobook showing in iTunes library as one title , I had to  enter the dat amyself since it was not listed on the internet data base, All entries for all tracks match and I have indicated  the disk number  as  one, two or three of three as indicated.
Yet when I sync the iTunes to the iPod I am being presented with each individual track listed in the Audiobook Menu.
I am using the latest version of iTunes and a iPod Classic 160G-- that I purchased three days ago purposefully for the converting of the audiobooks to a portable device since the Library of Congress  ( NLS BARD ) books are formatted differently and the player is bulky.
Does anybody hav eany other ideas?
Does anybody have an e-mail address for Apple,  preferably iTunes folks?
This is a handicap accessability problem since my wife cannot see and depends on these audio books.
Obviously I will try that link to that Chapter and Verse site and see what I can do.
Thank you for your quick response

Similar Messages

  • I had to download my Itunes again after my laptop crashed. I see my ipod but I do not know how to move my ipod library to the new itunes library

    I had to reload my itunes after my laptop crashed. I see my Ipod but I do not know how to get my Ipod library into my new Itues library?

    See this older post from another forum member Zevoneer covering the different methods available for moving content from your iPod back over to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • HT1660 I downloaded crayola copy print, and it seems to have downloaded fine, however I do not know how to open or use it on my 64bit PC

    I feel silly

    If you've bought/downloaded it from the iTunes store then it can only be used on an iOS device (i.e. iPhone, iPod Touch and/or iPad) it can't be used on PC or Mac - its requirements should be listed on the left-hand side of its description page in the store

  • Does anyone know how to keep all songs in the same album when they say featuring someone?

    Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed.  For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together.  Someone help.

    Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
    If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

  • HT1473 I just got a new computer and loaded Itunes. All my music is on my new Apple Ipod but I do not know how to sync it from the Ipad TO ITUNES so I can put all my playlists back on the computer for home sharing. Can anyone help with the answer? Thanks!

    How do you Sync Playlists (Music) from my ipod Nano TO ITUNES? I know how to sync it the other way, from the computer (Itunes) to the ipad, but I just got a new computer and all the music is only on my Ipod Nano. Any help would be greatly appreaciated. Thanks! Pete B

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to Keep all the Portal report menu's are "open" when the user logs on?

    Hi
    I have a question about the BI Portalu2019s configuration.  Does anyone know how to keep the Web Portal (i-vew) report menu's are "open" when the user logs on?
    Thanks.
    For example:
    Web Report Panel
    Report  Folder A 
                  i-view  a1
                  i-view  a2
                  i-view  a3
                  i-view  a4
                  i-view  a5
                  i-view  a6
    Report  Folder B 
                  i-view  b1
                  i-view  b2
                  i-view  b3
                  i-view  b4
                  i-view  b5
                  i-view  b6

    Hi,
    Thank you very much.  The problem is the Folder didn't 'open when the user logs on.  Yes, the iview can be openned.  Does anyone know how to set the default Open for the Folder.  My question is about the folder in BI portal.  Yes, the ivew we can set the defaul Open but we have Folder in the portal and our user wants to be able to see the report lists when they log on to the Portal.
    For example:
    Our Current situation
        Navigation Panel
       .>Act vs Plan report Folder_
       .>Year to Day report Folder_
    Hope To Be (When user logs on the BI Portal)
       Navigation Panel
        .>Act vs. Plan report Folder
            (i-view) Report A
            (i-view) Report B
            (i-view) Report C
            (i-view) Report D
            (i-view) Report E
    .>Year to Day report Folder
           (i-view)  Budget by Cost Element report
           (i-view)  Actual by Cost Center report
           (i-view)  Income statement report
           (i-view)  Balance Sheet report

  • I just got a new Mac but I don't know how to transfer all the music, apps, videos, etc from my iPod and old computer to my new Mac.

    I just got a new macbook air and I am trying to figure out how to get all of the music, videos, pictures, apps, etc. that I have on my ipod touch and on my old computer onto my mac. I don't want to lose anything. I just want to figure out how to sync my ipod to my new mac without losing any data.

    copy the entire iTunes folder (not just the iTunes music folder) from <MacintoshHD>/users/yourname/music on the source to <MacintoshHD>/users/yourname/music on the target (overwriting the iTunes folder in place there).
    you can use an external HD or your network for this operation. everything will be as you were used to from the old machine.

  • I'm getting an error msg 13019 when I try to sync my Nano iPod 6th generation.  Anyone know how to fix.  The trouble shooting tips for this error

    I keep getting error "13019" when trying to sync my Nano iPod 6th generation.  The fixes listed in "Troubleshooting" haven't worked, any solution.

    I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.
    http://support.apple.com/kb/TS3221
    Also would like to know how to find my passcode for Restrictions without restore the whole phone.
    Not possible, and since the Restrictions Passcode is included with your iPhone's backup, you must restore the iPhone as a new iPhone or not from the backup.

  • HT6154 i tunes cannot read the contents ofmy iphone.Asking me to go to the summary tab in iphone preferences and click restore to factory settings? I do not know how to get to the phone preferences tab, and won't this take out all of my contact info, musi

    I tunes does not read the contents of my iphone when plugged into my IMAC. It is asking me to go to the iphone preferences and hit restore? Does
    anyone know how I should do this? Will I lose all of my contacts, e-mails, etc. I did a backup on the phone to icloud as of now, but not sure
    what I should do just to sync with ITunes.

    That's right, there is an easier way, just check out my other answer to you:
    iMacange wrote:
    Otherwise, you can also do this if you're using a PC:
    1. Go to control panel where you can uninstall a program.
    2. Click on iTunes from the list of programs. There should be a button on top of the page that says “Repair”. Just click it.

  • Re: How to keep all the chat message forever?

    I want to keep my past messages but they keep slowly disappearing I av no access to computor only ipad nd phone nd cant see a way of keeping history of conversations im gutted that i am loseing them slowly PLEASE SOMEONE HELP

    On your laptop go to Windows Start and in the Search/Run box type %appdata%\skype and then press Enter or OK button. In the File Explorer that will pop-up locate a folder named as your Skype name. Open this folder. You should see there a file named main.db. May only be shown as "main" but with description "Data base file" in the Type column. This is the file that contains all your chats. What is the size of this file? Can you also se a file named main.corrupt or main.iscorrupt?

  • My iTunes will not connect to the internet because it is tied to IE's proxy settings but IE does not work how do I change the proxy setting to FireFox

    I have stopped using IE because it doesn't work, however my iTunes will not connect to the internet now because it is tied to the proxy setting in IE and now I am using FireFox, so, how do I get iTunes to see FireFox as my web browser.

    i am having the same problem, i stopped using IE and installed firefox , only now my itunes store won't connect to the internet.

  • I download the firefox program but I do not know how to sign off the mozilla support page

    How do I sign off the mozilla support page?
    Please advise me.
    YC

    Please hover over your username at the top of this page (make sure to scroll to the top) and click on "sign out".

  • How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

    Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

    Sorry my bad english..
    See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
    There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
    The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

  • How to get all the ID value dynamically in javascript

    Hi,
    Please let me know how to read all the id of the components dynamically from the *.jspx page in adf.
    i want to store all the values in the array of the javascript.
    Thanks

    jdev version -11.1.1.4
    use case:- we are capturing all value entered by the user on screen and storing it in the cookie like (key,value) pair where key is id and value is value of the component keyed-in.
    Later when there is browser close or transaction faliure we are retreiving back all the values from cookie on load of page.
    Now the point is when the screen loads back it is not getting the component id dynamically, we are storing manually the id's of the components to retrieve the value.
    But we want to read all the id of all the components dyanamically once page load and store it in javascript array variable.
    Let me know if there is any method to read all the id of the page in ADF javascript.
    Or any other alternative method.
    Please help.
    Thanks,

Maybe you are looking for