I am copying result in QE13 by usign bapi - BAPI_INSPOPER_RECORDRESULTS

Dear friend ,
I am copying result based on the inspection lot by using BAPI_INSPOPER_RECORDRESULTS this BAPI , Its working pefectly ,
But what happened now -
MITTELWERT                                        Copying in - QE 13 in Result tab.
1.5000000000000000E+02      -           150.00     its happing prior
but now its happing like that ...........
1.5000000000000000E+02      -           1.50
I unable to understand why its happing , i think it might be problem in configuration.
If greate help , if you provide me setting of this.
Regards
Durgesh

Hi,
maybe QE11 is an option for recording results vai BIM.
Cheers,
S>

Similar Messages

Copy result recording

Dear gurus,
when ever i am doing copy result recording ( Eg 04 to 89 ), Long text from 04 is not copied to 89 lot
i dont know why it is happening pls guide me ( qualitative ).
Regards,
s.sakthivel
Edited by: sakthivel subramanian on Feb 16, 2009 8:01 AM

Hi,
Refer below Article by Mr. Shyamal Joshi on Copy Inspection Lot.
- [Article|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60221c69-0f8b-2b10-eebf-bec51a601dd6]
Also refer below threads on the same topic.
- [Copy Inspection Lot 1|Copying inspection results from one lot to another]
- [Copy Inspection Lot 2|Re: PROCEDURE FOR COPY INSPECTION RESULTS FROM ONE LOT TO ANOTHER]
- [Copy Inspection Lot 3|copy inspection result]
Regards,
Dhaval

Quality Manager - Copy results to sample

Hello,
I need help.
1. Made Monitoring sample and I filled result. Sample and results are completed.
2. Now I created new sample (like in point 1. ) and I want copy result from my previous results. Is it possible to do?
Regards,
Luko

Dear Friend
There is No Feature available to copy Samply/Result and the same to copy in another sample.
But if u want to copy your Sample from your previos form (assume sample no : 001 which is already saved) follow the points to copy only Sample (previouse one) and YOU NEED TO ENTER THE RESULTS WHICH CAN NOT BE COPIED.
1. Assume you enter the Sample no. 001 and enter the result against this sample and saved.
2. Go to Sample Form
3 Query the Sample no. that is 001
4. Click New
5.Go to Edit in Main Header of the form
6. Click Duplicate
7. Select "Record above" (here your previos record that is Sample 001 will be copied with the SAMPLE NO. and Here you need to change the Sample No (since it will not allow to save bcz of duplicate record)
8 Next do as how you followed for your Sample 001. that is Change Sample no/Get spec/Save/Enter Result.
Note: HERE U CAN NOT COPY YOUR RESULTS....BUT U NEED TO ENTER.
Hope this is clear to u.
Raj
Satyam TechMahindra
Hyd

Scanning and Copying result in all black and lines. (with link to the scanned picture)

Whatever I try to scan and copy, even blank, the result is the same all black and full of lines.
Here is the link to the scanned picture. Copying also makes the same picture. https://www.dropbox.com/s/yaprfywbpf7cq70/scan0002.jpg?dl=0
The printer hasn't been used in a while, I just used it recently and the ink even dried out. Bought ink and printer's working fine.

Hi @RexRegnum,
Thank you for visiting the HP Support Forums! I see when you Copy or Scan on your HP Photosmart D110a you get black lines all over the page.
I would like you to start troubleshooting here: Vertical Bands, Streaks, or Lines in a Copy, or Scan
Please let me know the outcome, I will watch for your reply.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Copying results in Calculator to clipboard. How?

I'm assuming that we should be able to copy the results from a calculation on the Dashboard widget Calculator to the clipboard to paste back into a document. The Command C does not seem to work. How is it done?

This feature +was available in previous operating systems+. I used it every day.
If the calculator widget was active, you could use ⌘c and ⌘v without fail.
On OSX 10.6.5, you can paste but not copy...
This has to be a super simple fix...
Email apple with complaints so they'll get on it!!

COPY RESULTS

Kindly suggest me if any body face this business
After inspection of finished material in result recording i found defects based on defect i want to post new material code means second grade material code once i post the new material code results is not copied only stock posting will happened in unrestricted stock
My query is MIC is not linked with characteristics without linking is there any provision copy the results grade one material to grade 2 material in back ground if post in usage decision new material code

I Find the solution

Copying Results from Production to Despatch

Dear Experts,
We have configured result copying from one inspection lot to another inspection lot.
Now our required need to be changed:
when we are selecting inspection lot [Source - whcih results need to be copied] system has to propose BATCH instead inspection lot.
Now system is proposing inspection lot, but we want batch to be proposed.
Please let us know which setting need to be done ?
Thanks in advance.

Sorry, but the field referred to is for informational purposes only. It does not actually DO anything. The qutoe below is from the config help file on the values displayed in the field mentioned.
In this step, you can define inspection result origins for inspection
characteristics.
The user can specify a results origin during results recording, as long
as the inspection characteristic has the status "in process". The
results origin entry is a source of information only.
In addition to the description of the results origin, you can also
choose a data source for the inspection results. If you specify the
results origin during inspection planning for an inspection
characteristic, the inspection results for the affected characteristic
characteristic are taken from this data source.
You can look at the business add-in for "Selection of Results Data for Copy of Insp. Results" but all the provided functionality is for reading from exisitng inspection lots or mapping to externally provided data. You may be able to provide your own development in here but you'll need the assistance of an experienced APAP'er.
FF

Copy result to one lot to all lots

hear i faced one business senario i done settings copy inspection results to one lot to another lot now business requirement is copy inspection result one lot to all lots means i have 01 inspection type lots 10 i recorded result one lot then i want to copy to result all lots in one shot is it possible in sap if it is possible kindly tell solo

No its Not possible.Actually process of the copy of Inspection result form one lot to other Automatically/manually is triggered when you go inside the inspection lot to which it has to be transferred.Then you select the lot from the list from where you want to transfer.
So mass copy is really not possible.
You may have to create the program customized for the same.

Copy result container - why do I get a property types do not match error?

I am creating a Teststand sequence that parses through the ResultsList and creates my own format of text reporting file. (I need to do this because our database needs the data in a very specific text format). I am trying to copy a Result from a subsequence back up into the first level of the ResultList. (see attached screen shot for the details). I use the following statement:
Locals.TestResultListLocalCopy[3] = Locals.TestResultListLocalCopy[1].TS.SequenceCall.ResultList[0]
When I execute the sequence I get the following error for the above line:
-17321; Variable or property types do not match or are not compatible.
As you can see from the screen shot that I took at run-time, both of the array elements are of type Result, so why do I get the type error?
Thanks for any help - LAW
Attachments:
TSResultScreenShot.gif ‏119 KB

Hi LAW
I have rewritten your programm. I used the Methods Clone and SetPropertyObject from PropertyObject Class.
Test it.
I hope it was you are looking for
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
ResultTypeCopyError_Version2.seq ‏7 KB

File copy results in kernel task high CPU usage

Macbook Pro
MacBook Pro
Model Identifier:          MacBookPro6,1
Processor Name:          Intel Core i5
Processor Speed:          2.53 GHz
2010 year model.
Snow Leopard 10.6.7
Copying files over the network, or via external Firewire 800 harddrive invariably results in rather hight cpu utilization for kernel task process. The number are in the range of 15-20% in the Acivity Monitor. To compare, iMac 27", 2009, full speed FireWire bus file copy at 80 mb/sec makes only 2-3% kernel task CPU use. Why is Macbook pro so much worse? Is it due to chipset limitations, or what?

Just now I have been copying some movie files over Gigabit local area network, the data received per second is up to 55 mb, and kernel task consumes 50% or more of CPU. The same task on iMac or on Windows based computer does not tax the CPU in any way, since it is handled properly by network adapter I suppose. So what is wrong with 2010 Macbook Pro?

SAP QM: Copy Results recording error - Problem class medium

Hi,
Can anyone help me to resolve one error message u201CProblem class mediumu201D Number 1 during copying of Results recording from one IL to another IL as explained below.
Origin IL and Target IL has same sample size qty:
Origin IL - MIC's are valuated successfully in RR
Please let me know if any other details required to resolve the error.
Regards,
Udaya Kumar

Hi,
Thanks for your response.
Characteristics and MICs are properly assigned for both Target and Origin Inspection lot materials, only thing is MICs are not in same order in both the inspection plans.. is this the reason for the error message.
Regards,
Udaya Kumar

System Copy results in Framework Error

Hi all,
I've just done a System Copy for NW2004s system. I've been able to access the Portal fine from the Administrator account but I'm getting a "Error occurred while trying to access framework page" from any other account.
I'm using a custom Portal Desktop but the same error occurs if I use the default Portal desktop or my own desktop. Seems like all other users lost permission to desktop and/or framework and/or something else. I've assigned the Everyone group my Portal Desktop but still nothing. I'm thinking I missed something in the System Copy
UPDATE: I created a new user and that user can log onto the Portal fine. It appears any user logging on from the LDAP db are encountering errors.
Thanks
Pat
Message was edited by: PDoogan
Patrick Doogan

Dagfinn, thanks for responding.
I believe the authentication is OK but after logging in, I get this message...
Error occurred while trying to access framework page: ".../frameworkPages/com.sap.portal.frameworkpage",The object does not exist or you are not authorized to access it.If this problem persists, contact your system administrator.
I'm looking through the stack trace now but I'm not finding errors specific to this message.

[JS, CS4] file.Copy() results in 0 KB file

Hello,
In a nutshell, a script goes through some links, copies the link to a given destination, checks if there's a corresponding .CDR and then copies that to the same destination. It works absolutely perfectly, except for a seemingly random link - when the linked file and CDR are copied, 0 KB copies are created in the destination folder
This is a snippet of the code, for copying the link (the CDR copy bit is basically the same, just with a bit of string work to get the correct extension):
function normalLinkCopier(myLinks){
for (i = 0; i < myLinks.length; i++) {
var myLink = myLinks[i];
// Capture the location of the linked file.
var myLinkFile = new File(myLink.filePath);
// Capture the destination of the copied link - uses the folder selected previously and the link's name.
var myNewLinkFile = new File(myFolder + "/" + myLink.name);
//~ alert ("Original: " + myLinkFile + myLink.size + "\n\nCopy :" + myNewLinkFile)
// Copy the linked file to the destination
myLinkFile.copy(myNewLinkFile);
The alert tells me the correct path and name of the original file (myLinkFile), and the correct path and name of the destination file (myNewLinkFile). The original file exists and it has a size > 0 KB. However, when the copy function runs, it somehow makes the copy 0 KB.
One time when I was trying it I received this error message:
IOError: Cannot find the folder "C:\Program Files\Adobe\Adobe InDesign CS4\Scripts\XHTML For Digital Editions\null\<the erroneous file's name was here>.eps
I have not been able to replicate the above error, however.
To add to the weirdness, when I delete the link that is causing problems, the problem switches to another seemingly random link (it was links[33] originally, then it switches to links[0]). Delete that, then it switches again...but it's only ever a problem for one link at a time.
I cannot see what changes between getting the link's path and copying it - and why it only happens on one random link at a time.
If anyone can shed any light on the situation I will be extremely grateful!

I tried putting the loop contents inside a function, then I tried putting the new File lines inside separate functions, but all to no avail. Thanks for the idea though.
I've discovered something else about this error though. For two links in the document, A and B:
Select A, run the script, it works fine.
Select B, run the script, it creates the 0 KB files.
Select A again, run the script and 0 KB files are created.
Although I don't know if that opens up any avenues for me to explore...

Copying Results of Smart Folder Search to a Static Folder

Hello all,
Over the years my image files have become duplicative and dispersed. I like the fact that I can create a smart folder that pulls all images into one location. However, before I start my cleanup. I'd like to transfer a copy of each found image to an external HD as a back up. The folder contains about 150,000 files, so when I try try 'select all' and drag the contents to a mounted HD, I get the perpetual spinning beach ball and despite holding the mouse click until it disappears, I am not successful.
Anyone know of any way to collect the actual files and back them up to an external HD? Is there an app for that?
Thanks in advance!

P.S. I understand that the contents of the folder are not the actual files,but I am hoping there is an app or some other way to mine out the actual files identified and copy the to the external HD for BU.
Thanks.

CMIR data not copied while creating sales order from BAPI

hi all,
we are using BAPI to crate sales order.
but when we create SO manually, few fields at item level are derived automatically from CMIR...
Can we achieve same behavior through bapi also...
regards,
taranam

Hi Suraj,
So, You mean we need to derive COPA derivations for Copy by reference of a Sales Order,
If so could you please let me know how to do it.
Regards,
sg

I am copying result in QE13 by usign bapi - BAPI_INSPOPER_RECORDRESULTS

Similar Messages

Maybe you are looking for