I am creating  input   tax code in FTXP,BUT i am not getting tax code  whil

Dear EXpert,
I am creating  input   tax code in FTXP,BUT i am not getting tax code  while doing PO? what is the reason?
thanks& Regards,
saran.

Hi Saravana
Please make sure you have done all the following settings in SPRO.
SPRO>Basic Settings->Taxes->
1)Define Tax determination rule
2)define regional codes
3)Assign Delivering Plants For Tax Determination
4)Define Tax Relevancy Of Master Records
5)Maintain Sales Tax Identification Number Determination
regards
Yogesh

Similar Messages

  • Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App

    I Have purchased the Firefox OS phone but i am Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App

    Unfortunately, we do not provide support for apps. You should contact the developer of the app for more information. From what I can see, you are not getting anything from all apps. A simple thing you can to do is to reboot the phone.
    To reboot your phone:
    #Take the back cover of the phone off.
    #Take the battery out.
    #Take the SIM card and microSD card out (if applicable).
    #Wait 10 seconds.
    #Put the SIM card and microSD card back in (if applicable).
    #Put the battery back in.
    #Put the back cover back on.
    #Turn the device on.
    #Check if the issue you were having is still present.
    Please report back to us if this solved your problem!
    Thank you

  • TS3276 I created a new mailbox in mail, but it does not show up in my list

    I created a new mailbox in mail, but it does not show up in my list of mailboxes. Now I cannot change it or delete it. I keep getting an error message that I must resolve conflicts, but it won't let me change anything.  Can you help me fix this?

    Found it, thanks to the answer Vixen-of-Venus gave - thanks.

  • HT4623 My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

    My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

    Hi Mikki.J.H,
    Thanks for using Apple Support Communities.  This article has some information regarding SIM PINs that may help:
    iOS: Understanding the SIM PIN
    http://support.apple.com/kb/ht1316
    Cheers,
    - Ari

  • The content code I got was said as not reconised valid code during redemption of Up-to-date Program?

    I have registered for up-to-date program. However the content code I received was said as not recognised valid code during redemption. What can I do?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Folks report a two email process; one with a secure pdf that has the redemption code and another with the password to open the secure pdf.

  • I have created a user in oracle BPM but it is not reflected in system-jazn-data.xml file and I am unable to authenticate that user to create context as needed in workflow client

    I have created a user in oracle BPM but it is not reflected in system-jazn-data.xml file and I am unable to authenticate that user to create context as needed in workflow client

    weblogic credentials are different.
    and using thode credentials I am able to login to weblogic server
    the users I am talking about is the process users defined in realm.
    in realm those users are defined as Default authenticator and OID authenticator.
    and I am trying to authenticate one of those users defined in realm using java api so that I an access a process defined In Oracle BPM 11g

  • HT1918 My account is asking me for my security code on my credit card, but it will not accept the code as valid?  Not sure what to do?

    I am trying to purchase an app on a new iPad we have purchased.  I'm asked to put in my security code on my credit card for security reasons, but it will not accept my code as valid.  Not sure how to proceed.

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • HT2534 i am not getting "none" option while creating an apple id without using credit card.

    i am not getting "none" option while creating an apple id without using credit card.

    To get the none option, sign out of anything apple you're signed into. Go to the app store and try to download a free app, any free app. Instead of signing in, take the option to to make a new apple ID. Then go through the steps to make the ID and you'll see the 'none' option.

  • I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    Hello Unconscious2015,
    Thanks for using Apple Support Communities.
    If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

  • I tried to recover my account but I'm not receiving the code in my recovery email

    I forgot my password and I tried using the recovery option but I'm not getting the email for the recovery code. What shall I do?

    Hey mcrickster,
    Thanks for the question. It sounds like you are attempting to reset the password for your Apple ID. It may be possible that you have a rescue email address setup, and the password reset email is being sent to that address:
    When you provide a rescue email address, all future security emails, such as password resets from iForgot, will be sent to the address provided. The rescue email address you provide cannot be the same as your primary email address for your Apple ID.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    If your issue persists, you may wish to contact our Account Security Team, as outlined in this resource:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thanks,
    Matt M.

  • TS1292 I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have-repeatedly. How can I redeem my iTunes voucher?

    I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have…repeatedly. How can I redeem my iTunes voucher?

    If the card was issued in the same country as you and your account are based and the page that you posted from doesn't help, then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Is it possible to use a tax code in FB60 but which does not post any tax?

    Hello Gurus,
    Can you advise if it is possible to configure a tax code which can be selected in FB60. But we want this tax code not to post any tax value in SAP but simply to be allowed to be selected and populated in the doucment. In FTXP a tax code can be setup that does not need to have a tax rate % maintained against it or be linked to a GL account. However, this tax code cannot then be used in FB60 as the system asks that a rate is maintained and then that an account must be maintained.
    Can you advise if it is possible to maintain a tax code in such a way that it can be selected in FB60 but does not result in any tax posting to any tax account? We want it so that no value is posted, so even a 0% rate would not be good.
    Thanks for any ideas on this.
    Mart

    If you set up 0% tax code, system will NOT post any entry to GL account. You can use the tax code in FB60 & MIRO & PO too.
    thanx

  • HT201269 How do I add another contact / recipient to an SMS. Easy in Android, but I can't see how on my 5s.  Have to create a group on my Macbook Pro (OS 9.1), but it's not getting synced via usb. I'd prefer not to use cloud.

    How do I add a contact / recipient to an SMS on iPhone 5s?  It's easy on Android, but I've not sussed it on the iPhone - can't create a group etc.  Tried to create a group on Mac, but it either doesn't exist or won't sync to the phone with usb, nor will other contact details created on Mac.  I'd rather not use the cloud.  I'm sure contacts used to sync to my old iPod touch in Snow Leopard.
    Is it not more logical to have the phone as the main source of this sort of data?  We're more likely to update on a device we carry all the time surely?
    Please advise. Thank you

    Hey Cornish wrinkly,
    It sounds like you want to create a group message. You can read about group messaging on the iPhone here:
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • What do you do if you purchase Itune cards and the activation code are unreadable. How do I get the codes these are two $50.00 cards.

    I brought two $50 itune cards from best buy yesterday 6/6/2011. When I scratch off the activation code it was unreadable. How do I get my codes. I don't want to lose my $100. Please assist.

    iTunes Store: Invalid, inactive, or illegible codes

  • Not Getting Key Code for ALT key

    Hi,
    I am having some trouble in getting key code for alt key. Can Any one help in it.
    I am sharing for source code the way I am trying to do it.
    import flash.events.KeyboardEvent;
    stage.addEventListener(KeyboardEvent.KEY_DOWN, function(e:KeyboardEvent){trace("Key== "+e.keyCode); txt.text=""+e.keyCode;});

    Hi Amanpreet,
    The code i posted was a working example to detect Alt + click. You can try pasting it in the Actions panel of a blank AS3 file, Test Movie, press Alt and Click on the blank area of Stage and see that the trace statement appears in Output panel.
    Flash does not return the keycode of Alt key directly but lets you detect if Alt was pressed or not using 'event.altKey'. This boolean property is available for both Keyboard and Mouse events.
    You can try another sample: (This will only work when you Test Movie on Browser)
    //Place a dynamic textbox named 'txtStatus' on stage to display the text.
    stage.addEventListener(KeyboardEvent.KEY_DOWN, keyHandler);
    function keyHandler(e:KeyboardEvent) {
           txtStatus.text = e.keyCode.toString(); 
           if(e.altKey)
                txtStatus.text = 'alt pressed';
    When you Test Movie in browser, you'll need to click on the Stage area once to set it in focus. Also make sure to embed your fonts or set 'use device fonts' Anti-alias setting to display the text correctly.
    -Nipun

Maybe you are looking for