I am curious if other programs use the F7 ket for the Caret control?
I apparently solved my scrolling problem with the F7 key. I also noticed a big improvement with my mouse control in another program.
I am there curious if other programs use that key for control of the caret function.
Yes they do. What I know IE8 uses the F7 function.
Please mark this thread as solved if this worked for you :)
Similar Messages
-
Alright I started experiencing this problem about a week ago and It will just keep "Finishing..." up the screen recording but it wont let me shut down the mac, Nor will it let me Force quit this program to quit it because it is just annoying there, not being able to close down. If anyone has a solution, please do let me know. Again, I am using a Mac OS X Lion, 2011 Version.
You may also want to reset the plist of quicktime. Go to your users Library then look for Preferences folder. Look for com.apple.QuicktimePlayer.plist. Drag the plist on the desktop and try using quicktime again. I hope the problem is not the graphic card.
-
How to find which programs (and other objects) use the field LGORT
Hi, Im an Abap freshman, and I have been asked to search all programs and objects that use the field LGORT (Storage Location), regardless of what table it is in.
Is it possible to do it using the "Where-Used List"?
This will be important since a new Storage Location will be created for MM, and we have to assure that no other programs that reference to it will be affected.
I would appreciate any help. Thanks!!Hi George,
Go to transaction SE11, choose radiobutton Data Element then enter the name LGORT. Now using the where-used-list in the toolbar, choose programs checkbox in the subsequent dialog and press enter. It should show all programs using the field LGORT irrespective of table name.
Hope this helps.
Cheers,
Sougata.
Using ECC6.0 -
IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help
Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W -
Running abap programs using the macros
In our DP implementation we have faced several issues in the extraction of the data from the demand planning to one of the legacy system. We have written the ABAP program and would be using the read planning book bapi. I wanted to run the ABAP program using the macro could some one please let me know what is the structure of the macro builder that is used to fire the ABAP program. this is being fired from the macros as some comparison is to be done to run the macro.
Hi,
Some more information on macro function
REPORT_SUBMIT()
REPORT_SUBMIT( 'program_name' ; <'job_name'> ; <'job_number'>; <'newmode'>) causes the specified program to be executed. Use the optional arguments, job name and job number, if you wish the program to run in the background. If you set the argument 'newmode', the results are displayed in a new window.
Hope this will helps you.
Regards,
Sunitha. -
I have rent a film and received a message from I-tunes that the film will expire in two days. Even though I have confirmed the message by pressing ok the message window is not closing anymore, hence can't use anz other program of the I-Pad 2 anymore. Does anzbody in the forum experienced anything similar? If yes what is the solution to it?
Quit all apps and restart the iPad. Then try the video in the video app.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If by some chance you cannot go to the home screen, force quit iTunes by holding down on the sleep button until the red slider appears. Let go of the sleep button and then press and hold down on the home button until iTunes closes. Then restart the iPad as described above. -
Which programs use the memory card?
Can anyone help me determine which programs use the memory card? My E90 won't connect in transfer mode because Pc Suite says there is an application using it. As far as I'm concerned, active notes and sms were the ones to blame. They specifically have the option to use the memory card. But I can't find it in other apps. Any suggestions will be appreciated.
Various installed programs will run from your MMC in the background. I suggest you install and app called Best Taskman from www.symbianware.com.
Install this to your phone memory!
Now open it up, press options - view - advanced - processes
you will see all running processes and an icon next to them. If th icon looks like a memory card, then it is running from that. Press the "C" key on each MMC running process to close them.
Now you'll be able to connect via mass storage.
I recommend making a note of which apps these are and re-installing them to your phone memory instead. Also, any app you know will have a feature required to tun in the background, ensure this is installed on the phones memory!
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button. -
Design dialog program using the MVC pattern
Hi,
I have to design a dialog program using the MVC pattern , with all the controllers lying inside function modules.
I have searched out on net and could find out that BSP applications are designed using the MVC concept.Please suggest how can the dialog program be designed using MVC pattern.I'm currently developing a classic Dynpro dialog program. I have a module pool, with screens. I've tightly coupled the module pool with a controller class. Anything that happens in the module pool, is handled by the controller class. All the logic of screen handling is done by the controller class.
What remains in the module pool is the capturing of the okcode. the next screen to go to (if applicable), the setting of field attributes. But the okcode is sent straight to the controller for processing, and the screen/field information is also held in the controller.
I've also rewritten the auto-generated tab handling code, so the logic is done via a class.
So, it is possible - just aim to have as LITTLE as possible in the module pool or function group.
The model, of course, is in a separate class. -
My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
Cheers, Tom -
Does any one know if it is possible to run any other programs (besides the ones apple includes) on the new ipod touch? Specifically, I am hoping it would be able to run a few programs for PDA and Palm Pilots. I'm a med student and I have been holding out on buying a PDA with hopes that apple would come to my rescue and create one....but no luck yet! So if anyone knows if programs like epocrates, or merkmedicus, or any other PDA/Palm programs will run?
PS And can you download things from webpages and have them saved to the ipod?Two things:
1) The Touch has not been jailbreaked yet, and until this happens nothing can be loaded onto it such as third party apps.
2) Even if the Touch is jailbreaked, the apps you mentioned, such as eopcrates, have to be written and compiled for the Touch OS. As of right now they have not been. -
Can I have a second nickname on my other iPad using the same Apple ID?
Activation Lock is doing exactly what it was designed to do - preventing a non-owner from using the device as their own.
But why just "throw it away"? The dealership should be willing to tuck it away in their lost and found, as the owner may well show up looking for it? -
My mac book appears to stops other computers using the same Internet from accessing the wifi
I only have this problem when I come home to my parents house. Never had had this problem when at a home shared with 5 others all using the same wifi. But when I come home and connect my Mac book to the wifi and let's say watch netflixs, it will prevent all other devices (pc, iPhone, ipads) from getting an Internet connection. Just wondering if there was something in my settings that was making this happen.
Most often BitTorrent, iCloud, Dropbox, or some other cloud-data application is involved in cases of mysterious bandwidth use by a Mac. If you use iCloud, uncheck at least iCloud Drive in its preference pane and see whether there's any change. If you use third-party network backup or file-sync software, disable that. If you use a torrent client, remove it.
Otherwise, if you're running OS X 10.9 or later, you can see which processes are most active on the network.
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select All Processes from the View menu, if not already selected, and also select the Network tab.
Click the heading of the Sent Bytes column in the process table to sort the entries by bandwidth usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Repeat with the Rcvd Bytes column. -
Keystation Pro 88 (or other controller) as the Logic Control
Has anybody got their setup like this? I've been trying to get this to work for the past 6 hours and no luck. Can someone please help me? Just bought Studio 2 days ago and haven't touched it yet cuz I can't get the keyboard to fully work.
Joined: 17 Jan 2006
Posts: 55
Location: Los Angeles
Posted: Sun Jul 15, 2007 12:03 am Post subject: Keystation Pro 88 (or other controller) as the Logic Control
I'm sure some of you already know how to do this. I just figured I'd write this up at some point to share with others. The basic idea is to use the Keystaion Pro 88 (or some other MIDI Controller) as an actual Control Surface, or in this case the Logic Control, to have more freedom with the MIDI Controller, i.e. using the group of 8 faders (on the Keystation) to control Volume for tracks 1-8 in the arrange window, and then hitting Bank Right to automatically control tracks 9-16, and as a result making a universal controller not bound by specific channel messages, or MIDI CC Volume messages etc... in short the essence of any Control Surface.
What I'm describing below is what this app will also do: http://www.opuslocus.com/lcxmu/index.php
I basically just wanted to avoid using a separate application all together. Keep in mind that the app does simplify the whole process, but Logic inherently can do pretty much everything the app does.
I recommend reading this in its entirety before attempting.
KeyStation Pro 88 as Logic Control
Part One: Add Logic Control as Control Surface
1. Open Logic.
2. Preferences / Control Surfaces / Setup...
3. New / Install / Select your preferred device (in my case Logic Control
4. Click the icon in the setup window for the Logic Control.
5. On the left hand side under "Logic Control" you should see an "Out Port:" and "Input:" ... select the desired MIDI in/out through which your device is connected.
6. Open Preferences / Control Surfaces / Controller Assignments. Make sure you select the "EXPERT VIEW" check box.
7. You should now see a bunch of different Zones in the Zone column, one of which is "Control Surface: Logic Control"
8. Create your own Zone, KeyStation Pro 88 (or whatever) using the Plus sign in the bottom left corner of the Controller Assignments window.
9. Now basically go through the existing parameters already available in the Logic Control Zones, Select what you want. You can select entire Modes or individual Controls / Parameters. You can select multiple values (only multiple Control / Parameters NOT modes) by selecting and dragging or simply with select and holding command.
10. Command-C the selected Modes and then click back onto you user zone that you created above.
11. Click inside the Mode column (or Control / Parameter column depending upon what you selected and copied from the Logic Control zones).
12. Command-V to paste the Modes into your user Zone.
13. Do this for as many Modes / Controls you want, that your specific MIDI controller interface will be able to handle.
Part Two: Assigning Input Values
1. Open Preferences / Control Surfaces / Controller Assignments
2. Now for each parameter that you copied, you will need to set the input MIDI value from your controller.
3. Click on your User Zone, then Mode, then the first parameter in the 3rd column.
4. You should see a "MIDI Input" option (this should already be set correctly as long as you set it earlier in Step 5 of Part One). If it's not set to the correct MIDI input (which I found to be the case sometimes even after Step 5), then change that here.
5. Next to "Value Change:" you will see a box with MIDI data in it. Delete the existing date by highlight and delete.
6. Activate "Learn Mode" (bottom right corner of Controller Assignments window) then click within the "Value Change" box, then move the corresponding fader, button etc. The "Value Change" should now show the MIDI data value for that fader. Be careful here, there should only be 3 groups of 2 for data here... if you see 2 groups, of 3 groups, of 2 then typically the FIRST group of 3 should be the value you want here. You can always delete the data, and move the fader again to be sure. The reason for the 2 groups of 3 is not in error: some buttons send TWO MIDI values, one on press and one on release. You can use this to your advantage and assign TWO different functions to these buttons, thus the first (press hold) value can do one thing and the second (release) value can do another. You can also change the MIDI controller to only send 1 message on press and nothing on release, or simply make sure that only the on value is present in the "Value Change" box.
7. You'll have to do this for all the different knobs / faders etc. on your MIDI controller. There are many shortcuts of course. You can manually type in the Values if you know them. For the Keystation Pro, M-Audio has an app called Enigma that I recommend for changing controller parameters and much more on the Keystation. You can use this app to assign all the actual control data that each button or fader sends to the sequencer, once you know the values you can convert that data to the MIDI data values and enter them into the Value Change box.
8. Once you're done assigning values to the controllers, you can delete all the Zones except for the user Zone you created earlier. Before you do this, it's a good idea to back up the Control Surface preference file just in case you ever want to grab something else from the Logic Control Zones. You could always add a second Logic Control and copy the Zone from that, but you'd have to reassign all the MIDI Input: values ... short version, just back up the preference file before you delete the Zones. The reason why you want to delete the Zones that you're not using is simply because if you have a controller that happens to send out MIDI data to the sequencer, and the actual Logic Control happens to have that MIDI data value already inherent it it's Zones, then you could be asking for trouble, simply put you'd be sending MIDI data to change Volume and the Logic Control maybe has that MIDI Data Value already assigned to Pan for the existing track.
The file to backup is located here: ~Users/username/Library/Preferences/Logic/com.apple.logic.pro.cs
As a precaution I have always backed up my Logic Preference file WITH this .cs file. Technically it's not necessary... for instance: Let's say you trash your preferences and open Logic to find that the Logic Control is missing from the Control Surfaces Setup. So you add it back and now you find out that Logic is missing the User Zone that you created. If you close Logic and copy the .cs file back to the directory above, then upon reopening Logic you should find your User Zone is in place again. But I've had mixed results with that, so just in case I copy over the preference file with the .cs file as a pair. It seems that the Logic pref file only contains information that the Logic Control is a Control Surface on your system and the .cs file is the preferences for that specific Surface.
Another note: after a recent Logic update, maybe 7.2? ... it was whichever update added support for more Control Surfaces, I can't remember. This update basically erased all the hours of hard work linking the Keystation to Logic as the Logic Control. This only happened with this specific Control Surface update, but not with 7.2.3, probably simply because they didn't make any changes to the .cs pref file.
Anyhow, when this happens again in the future, there seems to be a quick fix. I take NO responsibility for you somehow crashing Logic on a continual basis after applying the fix. Personally I have seen NO issues by doing this at all. I simply copied a version of the .cs file with the new update missing the Keystation Zone, as well as a version of the .cs file WITH the Keystation Zone, to a PC (I think it was a PC, don't believe I tried it with textedit, although should work as well). I opened both of the files in notepad and compared them. I noticed the word Keystation towards the bottom and realized that most all the data (gibberish) was exactly the same up until a point in which the file with the Keystation data had a group that was absent from the new .cs pref file from the new update. So I basically copied the data from the old .cs pref file, pasted it into the new .cs pref file, saved it and open Logic. Logic warned me that a pref file was corrupt or something of that nature, but loaded fine anyway, and the Keystation Zone was back in Controller Assignments.
One last thing... the problem that some of you may run into is that by making your MIDI controller a Control Surface, or turning your Keystation Pro into a Logic Control, limits some of the functionality of the MIDI Controller. For instance, a Logic Control's main purpose is to control different faders, knobs and what not of MANY different tracks. When you move a fader for volume on the Logic control, it will move the fader corresponding to the selected track... it's not programed to say change the actual midi CC 7 for Volume, only the actual Fader. Thus, what if you want the MOD wheel to still control modulation and you want the sustatin pedal to continue to act as a sustain pedal. Well, if Logic sees that Port 1 is the input for the Logic Control, but in reality the Keystation, then it's only going to allow specific events through. The way around this issue is by using both the input options that the Keystation has... hook the MIDI out into Logic and use the USB port as well. I run the Keystation as a Logic Control through the USB port, and use the MIDI out for actual MIDI data. But the catch is you have to make sure you only connect the MIDI Port into Logic's sequencer in the environment. Thus open the environment, open Clicks & Ports, Port 1 and Port 2 are the IN/OUT for the USB port. Midi Port is the Keystation's MIDI port. Select and delete the cable for the SUM, and run individual cables for the ports you want to use. Thus, all your other MIDI interface Ports, the Caps Lock keyboard etc. Just be sure that if your using Port 1 (USB Port Out from Keystation) for the fake Logic Control, that it DOES NOT cable into the "Input View" or "to Recording & Thru". This creates yet another issue:
The controls on the Keystation have to send SOME form of MIDI control message / data to Logic. Well if the faders on the Keystation are preset to send Ch1-9, Volume 0-127 messages, then when you move a fader on the Keystation (as the Logic Control) since the Keystation is still reaching the sequencer from the MIDI port, you will be sending MIDI values that can effect your current track possibly when you don't want to. The work around for this is to be sure that all the faders / knobs that you want to use as your fake Logic Control are sending useless MIDI data... i.e. CC 75, 76, 77, and so on. This way moving faders won't effect playback, although you could still in theory record this MIDI data into your sequencer. You could however filter this events from entering the sequencer input with a transformer since you know precisely what MIDI CC values you are changing. The easy way to assign these values is to use the program Enigma from M-Audio that I mentioned above.
More discussion specifically related to the Keystation Pro 88:
You can do a lot using the Controller Assignments and different Zones from the Logic Control. For instance, the real Logic Control has Solo, Mute, and Record buttons for the 8 faders. The Keystation Pro only has 1 button underneath each fader. But you could use one of the other buttons to toggle Solo, Mute, and Record mode so that depending on which mode your in, the buttons underneath each fader will correspond to Mute or Solo etc. By the way, a good setup from my experience is to use the first 8 faders of the Keystation as the track faders, and the final 9th fader for Master Volume. You can then set two of the buttons underneath the Knobs as Bank Left and Bank Right buttons to change the 8 fader tracks to correspond to the onscreen track groups of 8. Also don't forget that you can assign TWO functions to EACH button, since a button press can send a value of 127 and a button release can send a 00 value. So if you press and hold a button it can activate "Shift-select Mode" and until released it can make the buttons under the faders act as Volume to Zero resets or whatever you want. When you release the button it will go back to just Mute mode or Solo mode. The Controller Assignments window has MANY options, and parameters some of which are very confusing and take a lot of trial and error to understand... the manual helps a little but of course isn't perfect.I'm thinking about buying a Keystation Pro 88 (2nd hand) so I was googling around and found this:
http://www.soundonsound.com/sos/Oct04/articles/keystation.htm
[quote]
I had some trouble getting the transport controls to work with Emagic's Logic, even when I loaded the 'Pro 88 Logic Preset.LSO' file on the supplied CD-ROM into Logic. I contacted the guys who designed and set up the Keystation here in the UK at the old Evolution offices, and between us we managed to work out what was going wrong. First of all, you need to enter the appropriate MIDI key commands in Logic's user preferences. These cannot be updated with an LSO file, so the commands have to be entered using the Learn Key function in Logic (see the screenshot below for the list we used). Then we discovered that the transport keys were toggling, which meant that only each second press of each key was actually working. It turned out that I had an early version of the Logic preset before this had been fixed, but the more recent one has been put on the M Audio web site for anyone else that needs it. It took about 30 seconds to change the output commands so that the buttons were no longer toggling.[/quote]
Did you get it to work correctly eventually? -
How to use the custom control ?
Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
· Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
· Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
· Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
· Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
· Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
· Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
· Frame
Pure display elements that group together elements on the screen, such as radio button groups.
· Subscreens
Area on the screen in which you can place another screen.
· Table controls
Tabular input/output fields.
· Tabstrip controls
Areas on the screen in which you can switch between various pages.
· Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
· Status icons
Display elements, indicating the status of the application program.
· OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala -
I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel. Also the datafile share which ends in .aplzod is not created in Outlook. The Contacts and Calendar are sent to iCloud (verified on iCloud.com) but the iCloud folders are not created in Outlook in the Contacts and Calendar navigation panes. I get a message toward the end of the sync process indicating that there was an unspecified error. I'm using the newest version of the iCloud Control Panel, the 32 bit version of Outlook 2010, Windows 7 64 bit, an iPhone 3GS, and the latest version of iTunes. Any ideas how to complete the sync process to the end?
Pretty much the same for me: Windows 7 64-bit, Outlook 2010, iCloud Control Panel 1.0.1, iPhone 3GS. Error report at end of setup process is shown below, and has been emailed. Any help please?
Your setup couldn't be started because of an unexpected error.
Error: 0x8004010F: ZebraBootstrap::ActivateDataFile: Could not create msgservice
AppleOutlookDAVConfig version: 3.0.42.0
Windows version (6.1.7601): Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit Local app data directory test: Pass Temp directory test: Pass Outlook version: 14 (14.0.6025.1000), x86 Outlook location (installed): C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE MAPI location: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
<Not found>
Contents of C:\Windows\system32\mapisvc.inf
[Services]
MSFAX XP=Fax Mail Transport
[Default Services]
MSFAX XP=Fax Mail Transport
[MSFAX XPP]
PR_PROVIDER_DLL_NAME=FXSXP.DLL
PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
PR_DISPLAY_NAME=Fax Mail Transport
PR_PROVIDER_DISPLAY=Fax Mail Transport
[MSFAX XP]
PR_DISPLAY_NAME=Fax Mail Transport
Providers=MSFAX XPP
PR_SERVICE_DLL_NAME=FXSXP.DLL
PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
PR_SERVICE_ENTRY_NAME=ServiceEntry
PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
HKLM\Software\Microsoft\Office\14.0\Access\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\OneNote\Outlook Add-in
Message Classes
HKLM\Software\Microsoft\Office\14.0\Outlook
Dataviz
InstallRoot
Namespaces
{0006F017-0000-0000-C000-000000000046}
FolderTypes
{00067800-0000-0000-C000-000000000046}
{00067801-0000-0000-C000-000000000046}
{00067802-0000-0000-C000-000000000046}
{00067803-0000-0000-C000-000000000046}
{00067804-0000-0000-C000-000000000046}
{00067808-0000-0000-C000-000000000046}
{00067828-0000-0000-C000-000000000046}
{00067829-0000-0000-C000-000000000046}
{0006782A-0000-0000-C000-000000000046}
ViewTypes
{00062000-0000-0000-C000-000000000046}
{00062001-0000-0000-C000-000000000046}
{00062002-0000-0000-C000-000000000046}
{00062003-0000-0000-C000-000000000046}
{00062004-0000-0000-C000-000000000046}
{0006F018-0000-0000-C000-000000000046}
FolderTypes
{00067820-0000-0000-C000-000000000046}
{00067821-0000-0000-C000-000000000046}
{00067822-0000-0000-C000-000000000046}
{00067823-0000-0000-C000-000000000046}
ViewTypes
{00062000-0000-0000-C000-000000000046}
{00062001-0000-0000-C000-000000000046}
{00062002-0000-0000-C000-000000000046}
{00062003-0000-0000-C000-000000000046}
{00062004-0000-0000-C000-000000000046}
Operations
1ImportFile
2ExportFile
3ExportDataLink
4ImportVCard
5ImportAccounts
6ImportVcalendar
7ImportRss
8ExportRss
9ImportCFL
ImportEudora
SchedulingInformation
FreeBusySupport
SearchTypes
{00067A00-0000-0000-C000-000000000046}
{00067A01-0000-0000-C000-000000000046}
{00067A02-0000-0000-C000-000000000046}
{00067A03-0000-0000-C000-000000000046}
{00067A04-0000-0000-C000-000000000046}
{00067A08-0000-0000-C000-000000000046}
{00067A10-0000-0000-C000-000000000046}
{00067A11-0000-0000-C000-000000000046}
{00067A20-0000-0000-C000-000000000046}
Setup
UpgradePath
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Office\Outlook
Addins
AccessAddin.DC
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Access
HKLM\Software\Microsoft\Office\14.0\User Settings\Excel_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Excel
HKLM\Software\Microsoft\Office\14.0\User Settings\Misc_SpsOutlookAddin\Create\Software\Microsoft\Office\Outlook
Addins
ColleagueImport.ColleagueImportAddin
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover
Create
Software
Microsoft
Office
14.0
Outlook
AutoDiscover
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Core
Create
Software
Microsoft
Internet Mail and News
Mail
MSDAIPP
Shared Tools
Outlook
Journaling
Conversation
Document
E-mail Message
Fax
Letter
Meeting
Meeting Cancellation
Meeting Request
Meeting Response
Note
Phone Call
Remote Session
Task
Task Request
Task Response
Web Service Providers
FreeBusy
office.microsoft.com
Windows
CurrentVersion
Internet Settings
TemplatePolicies
High
Zones
4
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg
Create
Software
Microsoft
Windows
Shell
Associations
UrlAssociations
mapi
UserChoice
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKLM\Software\Microsoft\Office\14.0\User Settings\PowerPoint_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft PowerPoint
HKLM\Software\Microsoft\Office\14.0\User Settings\Word_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
Microsoft Word
HKLM\Software\Microsoft\Office\8.0\Outlook
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.msi
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.xml
HKLM\Software\Microsoft\Office\Outlook
Addins
Apple.DAV.Addin
BCSAddin.Connect
Groove.OutlookProxyAddIn
Microsoft.VbaAddinForOutlook.1
OneNote.OutlookAddin
OscAddin.Connect
OutlookChangeNotifier.Connect
Search.OutlookToolbar
UmOutlookAddin.FormRegionAddin
AutoConfigDomains
hotmail.*
live.be
LIVE.CA
LIVE.CL
LIVE.CN
LIVE.CO.IN
LIVE.CO.KR
LIVE.CO.UK
LIVE.CO.ZA
LIVE.COM
LIVE.COM.AR
LIVE.COM.AU
LIVE.COM.MX
LIVE.COM.MY
LIVE.COM.PE
LIVE.COM.PK
LIVE.COM.PT
LIVE.COM.SG
LIVE.COM.VE
LIVE.DE
LIVE.DK
LIVE.FR
LIVE.HK
LIVE.IE
live.in
LIVE.IT
LIVE.JP
LIVE.MA
LIVE.NL
LIVE.NO
LIVE.PH
LIVE.RU
LIVE.SE
livemail.com.br
msn.*
msnhotmail.com
tw.live.com
windowslive.com
FormRegions
IPM.Note.Microsoft.Exchange.Fax.UM.CA
IPM.Note.Microsoft.Exchange.Voice
IPM.Note.Microsoft.Exchange.Voice.UM
IPM.Note.Microsoft.Exchange.Voice.UM.CA
IPM.Note.Microsoft.Fax.CA
IPM.Note.Microsoft.Voicemail
IPM.Note.Microsoft.Voicemail.UM
IPM.Note.Microsoft.Voicemail.UM.CA
IPM.Note.Rpmsg.Microsoft.Voicemail.UM
IPM.Note.Rpmsg.Microsoft.Voicemail.UM.CA
Outlook 10 Accounts
Categories
{ED475418-B0D6-11D2-8C3B-00104B2A6676}
{ED475419-B0D6-11D2-8C3B-00104B2A6676}
{ED475420-B0D6-11D2-8C3B-00104B2A6676}
Types
{4DB5CBF0-3B77-4852-BC8E-BB81908861F3}
{ED475411-B0D6-11D2-8C3B-00104B2A6676}
{ED475412-B0D6-11D2-8C3B-00104B2A6676}
{ED475414-B0D6-11D2-8C3B-00104B2A6676}
SocialConnector
SocialProviders
OscAddin.SharePointProvider
HKCU\Software\Microsoft\Office\14.0\Common\HelpViewer\Applications\OUTLOOK
AdditionalCollections
0
1033
HKCU\Software\Microsoft\Office\14.0\Common\Migration\Outlook
HKCU\Software\Microsoft\Office\14.0\Outlook
Addins
AutoDiscover
RedirectServers
Display Types
Balloons
Journal
Message
Office Explorer
Options
Calendar
MSHTML
International
ToDoBar
Perf
RoamingStreamsCache
6BF937902986EF42A5D2882B309351BF
Preferences
Resiliency
DisabledItems
Search
Catalog
Setup
SQM
Today
Folders
UserInfo
HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Core HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKCU\Software\Microsoft\Office\8.0\Outlook
HKCU\Software\Microsoft\Office\Outlook
Addins
AccessAddin.DC
ColleagueImport.ColleagueImportAddin
iTunesAddIn.CalendarHelper
OMI Account Manager
SocialConnector
Maybe you are looking for
-
I have laserjet m1522nf but it is not working with autocad 2014
i have laserjet m1522nf printer when give plot (print command) from Autocad 2014 to printer, auto cad stop woking we check with other printer it is working fine This question was solved. View Solution.
-
I installed Oracle 10g (10.1.0.2.0) and the HTML Server and HTML DB from the companion CD. I then started looking at some of the examples and even create a quick application myself based on a single table. Any time I wanted to look at something that
-
Subject: programming problem Date: Sun, 10 Mar 2002 19:48:34 +0800 From: LibraryPublicStation <[email protected]> Organization: Hong Kong University of Science and Technology Newsgroups: hkust.cs.class.201 Hi, I have some problems on the following co
-
hi
-
Clear my doubt about NOKIA 2600
hi. this is pavan. i would like to buy 2600 model.. but i had heard that there is a problem with battery backup. is it true? please suggest me whether that model is having that problem or not..