I am currently in the middle of a cross platform swap
I got Photoshop CS6 from a digital download and I need to find the serial number on my PC to submit it and get the program on my MAC
That's impossible for technical reasons, but your serial number is7 should be registered on your Adobe account...
Mylenium
Similar Messages
-
JSPM hungs in the middle of processing whith platform RHEL 5
hi, all
I am upgrade NW04s SP9 to SP11, the JSPM hungs in the middle of the processing after it upgrade some components ,no any error messages
has somebody met that, thanksHi
Check if you have enough space in the JSPM log directory as well as the DB space.Delete the old logs restart the jspm it should proceed -
Currently in the middle of iphone 5 surgery! Need a little help.
Background
I dropped my phone in water a while ago and it was water damaged. I plugged in my friends funcitoning screen into my phone and it worked. So I knew it was my screen that was water damaged.
Recently I ordered a new screen on ebay. It was not the whole front assembly (It excluded the front facing camera, home button, and heatsink/shield).
After installing my old front facing camera, home button and what not, my phone still did not turn on... (I charged it for 12 hours also)
MY QUESTION is, what could be the problem?
Possible Problems:
1. The battery is dead (wouldnt the phone still turn on if it is connected to a wall outlet?)
2. The front camera, home button etc. are damaged and somehow intefering with my phone
3. The screen I ordered from eBay is faulty.
4. ??????
Any help would be greatly appreciated. Thanks.Iphones are not user serviceable and Apple does not sell spare parts to anyone ,that is your problem
-
I need to know this as soon as possible. How do I allow this file to work on a PC. Thanks
Yes I opened it and it said "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
So what I did is open a new file, clicked Import, clicked on the project I've been trying to open and imported the selected sequences, since it wouldn't let me import the whole project. Now all the clips are in a bin, but how do I put it on my timeline as if it were the whole project I was working on? If I select the imported file, the clips appear on the timeline all scrambled and just as that, clips. Essentially I have clips but need the sequence (project) I had created. -
I run the test center for a very large school district with over 120k students. We've got a current deployed base of 54k client machines using Firefox 3.6. We haven't upgraded due to multiple reasons, the most important of which is removing the possibility of using In Private Browsing from the students, and dealing with plugin-updates for the non digital natives (read dumber than a bag of hammers users) that make up the majority of the client base.
We're testing ESR now, but just found out that end of life for 3.6 is tomorrow, 4/24. We are currently in the middle of statewide online testing. The question is, what will happen tomorrow when the browser goes end of life. The ESR wiki mentions that "an update to the current version of Desktop Firefox will be offered through the Application Update Service"
So the main question is, are my students/teachers going to get a popup telling them they have to update the browser if we have the updates already turned off? If so, can I turn it off remotely using SCCM, because it will cause all kinds of havoc.
Please advise asap, and thanks in advance.We had to do some serious gymnastics to remove at least most of the ability to use IPB. We removed it from the gui, but unfortunately, if they know the hotkey, they can still bring it up. Security has some serious headaches with this, as by law they have to be able to track where students go, and going with private browsing removes their ability to do forensic work they're required to be able to do. Not a very well thought out feature from Mozilla in my opinion, but it is what it is. Successive versions have made it even more difficult to remove even the gui portion.
We do plan to release ESR due to the aforementioned security issues, but testing has been slow.
But thanks for the reply. I think we can turn off the updates if it isn't already done. -
Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks
I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps! -
A lot of songs on my Iphone are cutting off several minutes short, and some are just skipping to the next song in the middle of the current song. Any ideas or suggestions would be appreciated.
Go to http://www.apple.com/support/itunes/contact/ and then click contact iTunes Store Support. Then find your issue in the categories and then it will most likely take you to a page with suggested things to do but also on this page should be an option to e-mail them. Just explain your problem and also have the names of the songs that you are having problems with listed in the e-mail so they can help you more quickly. They usually get back to you within 24 hours.
-
Using the middle mouse button to open a link in a new background tab also reloads the current page.
When I click on a link with the middle button to open the link in a new background tab, the original page reloads and my view jumps to the top each time.
The new tab loads fine but in order to continue reading the original page I have to scroll down to where the link I clicked on is.
If I right-click on the link and select "Open Link in New Tab" from the context menu then the behaviour is as expected -- does not reload the original page. The flaw only happens when using the convenient mouse shortcut.
This is annoying, for example, on long Wikipedia articles where I want to open some of the cited pages in other tabs for reading later whilst I continue to read original article. I'm constantly having to find where I was in order to continue reading.
I've observed this behaviour on both Windows XP and Ubuntu on various computers.
[EDIT]: Better description of problem in title.I've never had that happen with Firefox 4 on WinXP. I haven't updated my Netbook that runs Ubuntu to Firefox 4 yet.
1. Try disabling the Java Console 6.0.24 and the Java Quick Starter 1.0 extensions and see if that solves your middle-click problem.
2. Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.''
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
The nano advances to the next song in the middle of a current song.
My nano (refurbished) will (in the middle of a song) suddenly advance to the next song. What can be done to get the nano to play a song completely before advancing to the next song?
Does it do this for every song, or just some? I had this problem with DRM-protected iTunes purchases (file name ends in .m4p). If this is your problem, I might be able to help.
-
right now it is the middle of april and i bought the ipod at the beging of Agust the year befor so it still has not been a year. currently it is thursday and the screen changed to the white and black corner on the monday earlier in the week (so 4 days ago). i had just broken up with my gril friend and we were fighting. in anger i through my ipod at the wall. i was aiming for my pillow on my bed so it would hit something soft but i missed and it hit the hard concrete wall in my room. when i looked at my ipod it had turn itself off and when turn on the screen was white with a little black in one corner. i have tryed to restart it by holding down the power and home button till it restarted but the screen only got brighter and then eventually went back the the brightness it was before and turn off. i can still turn the screen on but cant unlock. i know it is still working cause my alram still goes off in the morning. the ipod is a 4th generation ipod touch 16 GB memory and is black. can this be fixed at home on my own or do i have to take it in to apple. can apple even fix it or is my ipod past the point of repair. any advice would be nice. thanks in advance.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $99 fr a 16 GB 4G. They do not fix yours.
Apple - iPod Repair price -
Mac Crashes in the middle of Time Capsule backup --HELP!
Been using time capsule for several months without any issues. In fact, it has been great until recently. A week or so ago, my MacBookPro began crashing in the middle of a time capsule back up. Just suddenly the MAC curtain comes down and tells me I must restart. When I restart I get an error message which I have copied into this message. I tried erasing a whole months worth of backups but still get the same problem........is it possible my MAC has gotten a virus?? Anyone who can help, your comments would be greatly appreciated!!!
Sun Jun 1 10:59:30 2008
panic(cpu 0 caller 0x0031678A): "btreeswapnode: about to write corrupt node!\n"@/SourceCache/xnu/xnu-1228.4.31/bsd/hfs/hfs_btreeio.c:197
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x34b0f918 : 0x12b0f7 (0x4581f4 0x34b0f94c 0x133230 0x0)
0x34b0f968 : 0x31678a (0x484588 0x92d6000 0x1 0x34b0fa40)
0x34b0f9a8 : 0x1fa244 (0x3054aa60 0x5c85004 0x0 0x0)
0x34b0fa68 : 0x1fb543 (0x0 0x0 0x200 0x0)
0x34b0fab8 : 0x3388b1 (0x4396e08 0x5c853b4 0x484261fc 0x2597b)
0x34b0fae8 : 0x325fa5 (0x5c85004 0x2 0x0 0x1)
0x34b0fc58 : 0x1f3097 (0x34b0fc78 0x5e26660 0x4 0xb52b9a4)
0x34b0fca8 : 0x1e2b5d (0x6354630 0x9361490 0x34b0fe2c 0xb52b9a4)
0x34b0ff78 : 0x3dcf13 (0xa8bec50 0xb52b8a0 0xb52b8e4 0x1)
0x34b0ffc8 : 0x19f1c3 (0x766b0e0 0x0 0x1a20b5 0x4b71480)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0102578
BSD process name corresponding to current thread: backupd
Mac OS version:
9C7010
Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C89C8)Steve --
Got this problem fixed. It seems the 10.5.3 update corrupted the update somehow. You can perform a disk image repair on the existing backup or just delete all your old back ups and start from scratch which is exactly what I did. Good luck! -
Why does my Mac log me out in the middle of my work?
I am running a 15-inch mid 2012 MacBook Pro. It has a 2.3 Ghz Intel COre i7, 16 GB og 1600 Mhz DDR3 RAM, and is currently on OS X 10.9.3. Randomly throughout my work day in the middle of whatever I am doing the computer will freeze momentarily, then log off. It doesn't restart, just goes gray, then asks me for my password to log me back in. It's very frustrating.
I've kept a log and this usually happens 2-3 times a day. The programs I usually run are Chrome, Mail, Calendar, my VM (Fusion), Skype, Terminal, Notepad, Messages. Of course I open other programs throughout the day, but these are usually the ones that are open at the time of the log out.
I've done the Apple Hardware Test (Press D during startup), and I've reset NVRAM. I've attached the output from EtreCheck below. Outside of an outdated Flash player I don't see any alarms:
EtreCheck version: 1.9.12 (48)
Report generated June 26, 2014 at 2:07:22 PM AKDT
Hardware Information:
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: (null)
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
2343 1920 x 1080 @ 60 Hz
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 1:47:3
Disk Information:
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
NCC-1701-D (disk0s2) / [Startup]: 499.25 GB (177.81 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple, Inc. Keyboard Hub
Razer Razer DeathAdder
Apple, Inc Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
DisplayLink DisplayLink Adapter
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.16) Support
[not loaded] com.displaylink.dlusbncm (1.11.0 - SDK 10.6) Support
[loaded] com.displaylink.driver.DisplayLinkDriver (2.1 - SDK 10.6) Support
[not loaded] com.makemkv.kext.daspi (1) Support
[loaded] com.sns.driver.SNSArchitectureModel (1.1) Support
[loaded] com.sns.driver.SnsiSCSI (4.1) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.2.12) Support
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.barebones.authd.plist Support
[not loaded] com.deploystudio.server.plist Support
[running] com.displaylink.displaylinkmanager.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.sns.globalSAN.daemon.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[not loaded] com.displaylink.useragent-prelogin.plist Support
[running] com.displaylink.useragent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
iTunesHelper
Dropbox
VMware Fusion Start Menu
IPMenulet
GeekTool Helper
Internet Plug-ins:
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 Support
net.juniper.DSSafariExtensions: Version: (null) Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
LogMeIn: Version: 1.0.961 - SDK 10.7 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
LogMeInSafari32: Version: 1.0.961 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
ATTConnectEventEntry: Version: 1.0.3 - SDK 10.8
WebEx64: Version: 1.0 - SDK 10.5 Support
3rd Party Preference Panes:
DeployStudioServer Support
Flash Player Support
Flip4Mac WMV Support
globalSAN iSCSI Initiator Support
Java Support
Perian Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
NCC-1701-D: Disk size: 464.96 GB Disk used: 299.36 GB
Destinations:
IL Hard Drive [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 8
Oldest backup: 2014-06-23 20:44:31 +0000
Last backup: 2014-06-25 00:11:53 +0000
Top Processes by CPU:
19% top
12% ioreg
5% DisplayLinkManager
4% SophosWebIntelligence
3% InterCheck
Top Processes by Memory:
246 MB WindowServer
180 MB Google Chrome
180 MB Finder
164 MB com.apple.IconServicesAgent
147 MB SophosScanD
Virtual Memory Information:
10.05 GB Free RAM
3.35 GB Active RAM
1.36 GB Inactive RAM
1.24 GB Wired RAM
1.00 GB Page-ins
0 B Page-outs
I'm also running two extra monitors. One is connected via Thunderbolt and the other by a DVI-USB external card. I'm not sure if that is relevant. Any ideas?Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?
DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion. -
How can I stop a timed loop in the middle of its cycle?
Hello all,
I'm creating VI that will gather data from a series of thermocouples and outputing that data to a graph as well as to a spreadsheet file.
The sampling rate for each channel needs to be independent and variable. That is, they want to increase the sampling rate to 1/sec during temperature transitions, and then 1/10minutes (for example) when saturated.
I was going to use a menu ring for the user to select the sampling rate (1 second to 15 minutes, with 7 different rates in between) and then, using a case statement, select the value of how long the 'wait (ms)' should wait in each loop.
This kind of works with one major problem. If the user currently has the sampling rate set to 15 minutes, th
en wants to switch it to 1 second, it can take up to 14:59 for the 'wait(ms)' to finish waiting on the 15 minute wait before it switches to the faster sampling rate.
Is there a way to stop a 'wait(ms)' in the middle of its wait cycle? Or is there a better way of doing this?
Thanks in advance for your help.
Dave Neumann
[email protected]"Neumannium" wrote in message
news:[email protected]..
> Hello all,
>
> I'm creating VI that will gather data from a series of thermocouples
> and outputing that data to a graph as well as to a spreadsheet file.
>
> The sampling rate for each channel needs to be independent and
> variable. That is, they want to increase the sampling rate to 1/sec
> during temperature transitions, and then 1/10minutes (for example)
> when saturated.
>
> I was going to use a menu ring for the user to select the sampling
> rate (1 second to 15 minutes, with 7 different rates in between) and
> then, using a case statement, select the value of how long the 'wait
> (ms)' should wait in each loop.
>
> This kind of works with one maj
or problem. If the user currently has
> the sampling rate set to 15 minutes, then wants to switch it to 1
> second, it can take up to 14:59 for the 'wait(ms)' to finish waiting
> on the 15 minute wait before it switches to the faster sampling rate.
>
> Is there a way to stop a 'wait(ms)' in the middle of its wait cycle?
> Or is there a better way of doing this?
Instead of using the wait ms.vi you could use 'tick count' at the beginning
of the loop and then have an inner loop that keeps checking the 'tick count'
until time minus time > time to wait.
You will need to figure out how to handle the case where the millisecond
timer wraps from 2^32-1 to zero. That should not be too difficult. -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Maybe you are looking for
-
Print 6i report on HPUX in duplex mode
I can't seem to get a 6i report launched in on an HP box to print in Duplex. I have tried the "create duplexsed file" solution but to no success. I would appreciate any help.
-
Please help create this matrix report
Hi, I'm using Reports6i. I want to create a matrix report like below. Country JUN2008 JUL2008 Teu Feu Teu Feu INDIA 13 9 1 10 ..... .With the query i've written, i get the data
-
Inserting animations from another project
Hello, I'm using Captivate 5 (ver. 5.0.2.630) for a while know and up till know I've included interactive content by using creating it in another project, publishing it and than I included it as an animation in my main project. That worked fine for m
-
i just bought the monthly package of lightroom and photoshop cc. I can't seem to find it under the apps on creative cloud - can you please assist me with this.
-
OVD plugin returning "Virtual" entry when entry not yet available in OID
Hi, We've been working on a solution in which a new user has to get immediate access to a website and we, because the provisioning is taking some time, we have implemented a plugin for OVD which basically looks in the OID and if the user exists in OI