I am currently ruDo I have to purchase the Mac box set to upgrade or can I just upgrade the OS?
I am currently running Mac OS X V. 10.4.11. I use my mac for one purpose and one software only. Do I have to purchase the Mac box set with iIife and everything to upgrade or can I upgrade to Snow Leopard?
Reading the spec on Snow leopard it says if I have OSX v.10.4 to purchase the mac box set. I dont use any of that bundled software. I just simply want to upgrade my OS.
I know I can buy just the OS but I want to make sure it is complatible before I do so.
Thanks in advance
You can upgrade from10.4 to 10.6 with no problems. Any program that runs under 10.4 will run under10.6
You won't need the box set unless you want the latest iLife and iWork. If you only want iPhoto or other single apps you can get them from the App Store, which you get added to the OS and the dock when you’ve upgraded to at least 10.6.6. iPhoto, iMovie and Garage Band for $15 each and Pages, Keynote and Numbers for $20 each.
Similar Messages
-
I have os 10.4. Why do I need the mac box set to upgrade to snow leopard?
I have os 10.4. Why do I need the mac box set to upgrade to snow leopard? What happens if I upgrade with just a 10.6 upgrade?
ds store wrote:
No iPhoto, iMovie, iDVD, Garageband, but I can pinch those off the 10.4 installer disk using Pacifist.
You can usually get those from the original grey installer discs that came with your Mac without bothering with Pacifist. Look for an 'installed bundled software' or similarly named item on one of those discs, generally the #1 disc. Run that & the original versions of those apps that were bundled with your Mac will be installed. Software Update will let you know if there is an update you can download for them (but of course that won't include an upgrade to a more recent major version, which you would have to buy separately). -
Do I have to purchase the Mac OS X v10.6.6 in order to update my software. My software version is currently 10.5.8. I have updated my iphone 4 to the IOS6 version however my macbook is still at 10.5.8 version therefore i am not able to update my Itunes even .My iphone is not recognizing my macbook .Please advise
Call Apple and purchase the Snow Leopard DVD so that you can upgrade to 10.6
Allan -
I would like to purchase Contribute. We currently do not have any of the creative suites or Contribute. How much does it cost to just get the single user for Adobe Contribute CS5? And how do I purchase that?
I think it's just a little over $200 if you don't have an older version to upgrade. Around $100 if you do.
You can get it at www.adobe.com/products/contribute.html.
Click the "buy" button (top right of the page) then select "full" next to where it says "I want to buy". Add it to your cart (at that point you should get the exact price). -
I purchased my mac Sept 2011 with the latest version of iphoto. Every time I try to do an iphoto update I'm always asked to log in with the name I used to purchase the app. Does this mean that I have to purchase the latest update? I thought the updates were free and if it so, how do I actually update iphoto?
DId you Accept the apps when you bought the Mac? In the App Store go to the Purchases List and press Accept there. Then you'll be able to update. If that's not available then you'll need to contact App Store support.
Regards
TD -
I purchased and installedParallels Desktop 8 for Mac, I now have to purchase the Microsoft Word software, is the student edition my best bet? I have a MacBook with 2 gig of RAM, and am curious as to any advice anyone has, thank you.
I currently have 71.88 GB out of 118.86 of HD memory available
These is the system overview:
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version (system): 1.17f0
Sudden Motion Sensor:
State: Enabledthe student edition is the best of you are a student and can get the discount.
-
I am running Acrobat Pro 9 (9.5.5). Do we have to purchase the new version if we have never upgraded? Or are we entitled to an upgrade to the latest version.
I am not really clear on the intention of your question. If you are going to get the latest version you are going to purchase it. When you go to purchase it you should be able to see if there is an option to purchase it as an upgrade from the version you currently have. I cannot find the purchase page to check myself... I can only find the subscription option.
-
I own Windows Photoshop CS and I am now working on a Mac can I upgrade from CS Windows to CS6 Mac? or do I have to purchase the full version?
BleuStarz wrote:
So, just so I have this straight; would CS upgrade to CS5 or did you mean I would have to purchase CS5 to upgrade to CS6? And If so, does CS upgrade any further? i.e. CS 3 or 4? Thanks for your reply --
CS will not upgrade to CS5. Historically, only CS2-CS4 ever qualified for upgrade to CS5. Those versions are all long superseded and no longer available from Adobe.
Adobe currently only sells CS6 (for outright purchase) and the Cloud (by subscription only). Cloud members have access to both CS6 and CC.
The only way to upgrade to CS6 is from CS5. Adobe no longer sells CS5. Unless you purchase the full version of CS5 from elsewhere (I don't see any point in that in this case) you would not be able to upgrade to CS6. You'd have to buy the full version of CS6. Or subscribe to one of the Cloud plans. PS+LR is an excellent deal if you use those products. -
OK, this is the first time I have used this so I may not have started correctly, so here goes another try. I opened a Numbers Document and noticed the presentation was different from when I worked it before. Since there have been a number of auto updates since I had worked in Numbers, I assumed I had an updated program. I found it hard to figure out so I closed the document and went on to other things. When I went back to it I found a message saying I needed a newer version of the program to open it. Fortunately, the document was backed up and when I opened the backup it came in my familiar form. I have not purchased the new version of Numbers but suspect that is what was using for that brief period yesterday. Anyone know haw that happened?
Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG -
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
I didn't know I was using a trial version of PDF files and now I can't do anything with them and I keep getting a notice for the 2015 version as I have the 2014 cc. If I have to purchase the 2015, will it be the download version or will I get the software version?
Hi scarabs55,
Are you working with Acrobat or Photosohp? (You mention both PDF files and photos, so it's not clear.)
Let us know what software you're thinking about upgrading and we can point you in the right direction.
Best,
Sara -
while downloading new Mountain lion OS i am getting "An error while downlaoding" , since i have already purchased the same & am not able to dowload the same, please suggest a solution
Disable anti virus software and try turning off the Firewall in System Preferences > Security & Privacy > Firewall.
-
I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware. -
I already have creative cloud Photography plan and just want to add dreamweaver, is this possible? Alternatively, I have tried purchasing the Complete — For CS Customers but it asks me to contact customer support and then sends me through to the forums!!
yes.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html -
How do I get the Ap Store to stop showing that I have an update available? I have already purchased the update from the company's site.
A Fix For: App Store Keeps Wanting To Update Apps
Maybe you are looking for
-
Problem with batch management indicator
Hi Gurus, I have an issue with batch management. There is one material which was not batch managed. The requirement was to make it batch managed. There were no open purchase orders and the only thing pending was the stock in the present and previous
-
hi all. nokia,thanks for new firmware and flash lite3 and web runtime. but old bugs are still stay and didnt solve. after auto focus and capturing,screen is black for afew seconds. the tone of second camera is broken and crashed. standby time dosnt h
-
Synchronous Multi mapping in HTTP
Dear Process Integrators I have a requirement where I am receiving an HTTP req (Synchronous) as an xml bundle, from System A. I have to split this incoming xml bundled message into individual messages and send it to another system B via a synchronous
-
Anyone on PeopleSoft 8.53 yet?
I am testing TES 6.1.0.208 with PS 8.51. I was just told that 6.1 is not supporting PS 8.53 yet. Anyone tried yet?
-
Hi, I currently trying to set up replication between two ACS servers (installed on windows) both running software version 4.2.1.15. The replication completes ok (as shown in the logs on both servers), but the replicated config is not showing on the s