I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

Similar Messages

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck!

How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
Final Cut Pro - Wikipedia
There are a few apps that are better. I think you can run multiple instances of Handbrake for one.
I've read about and wanted to try PowerDirector 9 (Windows)
PowerDirector 9 video software
video editing software Wiki

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

I have acrobat 9 pro and i have been told that it is not compatible with windows 7 and that is why i cannot re download

I have abrobat pro 9 and cannot re download
I have been told that it is no compatile with windows 7

Hi ,
That is absolutely correct .Acrobat 9 pro is not compatible with Windows 7 .It might lead to certain conflicts while the downloading is in process .
You could refer the following link to get more details about the technical specifications about Acrobat 9 .
https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html
If you are on windows 7 I would recommend you to switch to the latest Acrobat DC as it has a new and interesting UI along with enhanced features that will make your work a lot simpler .
In case you have any other query ,please write back .We would be here to assist you accordingly .
Regards
Sukrit Dhingra

Can you use final cut pro and logic, after effect with lion operating system or not

This question to apple people as well, can you use all previous softwares on lion or not?

Susie Summer wrote:
PS I had no problem exporting previous projects - proof that I had Compressor!!!!!!
Actually, no. Compressor is a separate application is NOT required in order to export from FCP X. Lots of people buy FCP X but not Compressor.
Something in your system got hosed.
I suggest you delete FCP X completely from your system using FCS Remover, and then download it from your Purchases in the App Store.

I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum.

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

EExactly what settings are you using. Some go to iTunes.

I have been using Final Cut pro v6 without any problems but recently had to reinstall. Since then I can't open and view all my Quicktime clips. They appear white in timeline which means you can hear audio but not view picture. Any tips?

I have been using Final Cut Pro without any problems - v6 - for ages. I recently had a hardware issue and had to reinstall the software. Since then I can't open most of my QT clips in my fcp project. They appear as white clips - audio only no pictures. There are a few QT clips you can view as regular thumbnail images and they play ok. What's the issue? I have fcp v6.0.6 and QT v7. Any thoughts on what to do next?

Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7. That's as far as updates have taken me although i have requested daily updates. I forgot to say the clips don't play in QT view either. Again sound but no pictures when they are played.

MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

Hi I just updated from Snow Leopard to Mountain Lion. I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk. My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standar

Hi I just updated from Snow Leopard to Mountain Lion.
I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
Can I fix this problem?

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

How do you mark a section from the timeline to send to Compressor 4 using Final Cut Pro X?

I am trying to send just a certain piece from the Timeline to Compressor 4 using Final Cut Pro X and I can't figure it out. Please help!

jakelovesanna wrote:
The video itself is intirely 5 minutes, but the timeline goes to 24 hrs.
24 hours?
If you select the timeline and press Shift+Z do you see a lot of black space in the timeline? If so, you may have a huge gap clip (although I fail to understand how you achieved it). Click on it and if it can be selected, delete it with the Backspace Key (next to the = key).
Then press Shift+Z again.
If I've got this wrong, can you post a screen grab of your timeline?
Andy

I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

AH...good.
There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine. And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
Long story short...you can install it fine without any issues.

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

Similar Messages

Maybe you are looking for