I am currently using ipad2 (only wifi) and...

I am currently using ipad2 (only wifi) and... having lots of difficulites accessing to Internet.
I was wondering if Pantech 4G LTE USB modem would work.
Or it there is another way I could get access to Internet freely? ;-l
Please.. hepl me out!
Thank you ~

Fun130-
The iPad does not have necessary drivers for the Pantech modem, even if you could connect it.
If you already have the Pantech modem, you might be able to use it with a CradlePoint WiFi router such as the MBR900. That would make the router into a WiFi hotspot. Check the CradlePoint website to be sure that model modem is compatible.
Another possibility is a WiFi hotspot called a "MiFi" that uses the same system as the Pantech modem. I understand there are both battery powered and plug-in versions available. Check with your cellular provider for details.
Fred

Similar Messages

Using ipad2 and airplay with appleTV; can I have the ipad2 on wifi and the AppleTV on a wired port of the same router in order to use airplay?

can I have the ipad2 on wifi and the AppleTV on a wired port of the same router in order to use airplay?

I belive you can, I think my friends Apple TV is connected to their internet via an Ethernet cable, and we use Airplay sometimes using our iPads that are connected to the same network via WiFi. It should work as long as they are both connected to the same network. However, I don't have an Apple TV of my own, so don't take this as a solid answer.

I'm currently using Lightroom 5.3 and I'm constantly being told to update to 5.5. The download is over 900 Mb but only about a third of that downloads. I have plenty of space on my SSD. Each time I try to complete the installation I get the message 'A pro

I'm currently using Lightroom 5.3 and I'm constantly being told to update to 5.5. The download is over 900 Mb but only about a third of that downloads. I have plenty of space on my SSD. Each time I try to complete the installation I get the message 'A problem occurred while extracting the archive. Please try downloading the Photoshop Lightroom 5.5 Installer again.' What am I doing wrong?

use a different browser and download from here,
Product updates

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sims chip...we are told. We were advised that this model wound work in Euro

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sim chip...we are told. An Apple store employee here said this model is good only in the US. The iPads here take a sim card. We were advised by an Apple Store Employee at home that this model would work in Europe and that we could buy our service here. That does not seem to be the case. We have been told that we must invest in a modem at 200.00€ and then purchase a separate service plan for each country. We can use the free wifi wherever it is available but we cannot connect to the outside world when out of range. Is there anything else we can do?
Thanks, John

Unfortunately, no other solution is available.
Hope this helps

Im able to log in with 2 different passwords. I am currently using a xfinity modem and TC 2TB. Please help!!

Im able to log in with 2 different passwords. I am currently using a xfinity modem and TC 2TB. Please help!!

I am not sure of the problem..
Is the TC the main router of the network or is it in bridge??
Is the Xfinitiy a router.. I thought they generally are.. so have you turned off the wireless?
Please do clear out all the old names from your phone and mac.. so it is completely empty.. power off the device.. restart and go through the discovery again. Make sure you save the password so you are automatically logged in. But when you leave and come back you still have to select the correct wireless unless you have the order correct.. !!
The reset the TC to factory and start over.
Give it new names.. use names that are short, no spaces and pure alphanumeric.
For total control use different names for each band.
Use only WPA2 Personal security with 10-20 character pure alphanumeric password. Can be mixed case and numbers.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Can I use a combined WiFi and Bluetooth PCI card in my 2GHZ Mac Pro?

Can I use a combined WiFi and Bluetooth PCI card in my 2GHZ Mac Pro?
I'd like to buy this one:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250583493783&ssPageName=STR K:MEWAX:IT
Many thanks in advance for your help,
Max

It probably won't work. Some USB PCI cards will work out of the box with OS X even though the manufacturers don't specifically support it. This ad does not list the card manufacturer or chipset so it's very difficult to tell much about it. Furthermore it states that to modify the settings it requires a Windows-based Utility. Unless the seller has a good return policy I wouldn't buy it.

Well I have a question. Why my New iPad is so hot within 30 minutes.i used internet from wifi and playing game 3d or 2d . It

Well I have a question. Why my New iPad is so hot within 30 minutes.i used internet from wifi and playing game 3d or 2d . It's appear after I upgrade to IOS6. Why?

It's normal for the iPad or any similar device to get warm when it's under heavy load. If it gets too warm, it will shut itself off and show a disabled message.
Take a look at this Apple doc -> Phone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
If you believe it's hotter than normal, make a reservation with a Genius.

Is it possible to install a TomTom app in my iPad "only wifi" and use the GPS in my iPhone 5?

Hi.
Is it possible to install a TomTom app in my iPad "only wifi model" and use the GPS in my iPhone 5?
BR
Nike

Nope

Nokia c3- using only wifi and no GPRS / EDGE

Is there a way to use only WiFi for internet / OVI store / Community connections always? And Never use GPRS / EDGE at all?
(i.e) Is ther a way to disable GPRS and EDGE without affecting WiFi in Nokia C3-00?

aasshhuu wrote:
please tell me how to use only wifi in c3-00 not any gprs pack.
Try the following steps:
You can set the WLAN or Wi-Fi to the highest priority so it will not connect to GPRS. To do this, go to Menu > Settings > Connectivity > WLAN > Saved WLANs > Select which WLAN that you want to connect > Options > Organise priority.
Once done, set the packet data connection to when needed. This settings will establish a packet data connection when needed by an application. The connection is closed when the application is closed. You can set that by going to Menu > Settings > Connectivity > Packet data > Packet data connection > When needed.
Hope this helps.

Can I use Ipad2 with wifi +3G with an Alltel Motorola MilestoneX 3g hotspot phone?

Alltel is my mobile service provider, and they are now offering the Motorola Milestone X running Android 2.2; this phone can function as a 3G hotspot. If I have an Ipad2 with wifi+3g, and I turn the hotspot functionality of the phone on, can my Ipad then connect to that hotspot signal created by my phone--even though my service is through Alltel and not Verizon or ATT? Alltel charges $20 a month for this functionality on top of my smartphone plan, but it provides unlimited data usage. The fee for 3G Ipad date service for both Verizon and ATT is just a little more, but they have data limits on those plans.
Any assistance/info you can provide will be appreciated!

ok, so the phone creates a wifi signal, not a 3g signal--then the Ipad connects via wifi, not 3G, to the phone-- and then gets data off the 3G network ...that is where I was confused. Data flows from the Alltel 3G signal to the phone, then from the phone's wifi hotspot via a wifi signal to ipad's wifi receiver...
I was not sure if the phone "created" a 3G signal that the Ipad was then supposed to connect to...
Much clearer now...thanks!
So, if this is how I am going to use it, do I even need the Ipad+3G--I really would only need the Ipad2+wifi, correct???

3G Options for iPad2 only WiFi model

Mates,
Further digging out for better solution for only WiFi iPad2 model for 3G, found:
http://www.91mobiles.com/blog/8173/Tips+to+turn+your+Wi+Fi+only+iPad+to+iPad+3G. html
And
http://www.bgr.in/guide/best-mobile-add-on/
says "Mi-Fi device or a travel Wi-Fi routers are capable of accessing 3G broadband network and sharing the same internet connection"
Steps to configure Olive Nexus Travel router with 3G USB modem
The steps to configure is pretty straight-forward. Do not look at the instruction manual that accompanies the product as it seems to be little outdated. The PDF manual provided on the site is pretty accurate and do follow that.
Step1: Switch on the travel router
Step2: Open the web browser and type in the url: http://192.168.123.254
Step3: Type “admin” as the password. This is the default password.
Step4: Click “Wizard” step
Step5: Setup new password
Step6: Setup Timezone
Step7: Choose WAN Type. If you are using 3G USB modem, choose “Some ISPs require the use of 3G to connect to their services”.
Step8: In this step, type in the details of your USB Modem such as Dialled number, Account username and account password.
Step9: Enable Wireless Module.
Step10: Setup Wireless security and WEP Keys.
Step11: Confirm and apply the wireless settings. Now your Travel router is successfully configured with your 3G USB modem.
Comments will be appreciate on this, any experience..reliability..etc..
Cheers;
Ravi

welcome2ravi wrote:
Mates,
Further digging out for better solution for only WiFi iPad2 model for 3G, found:
I would say those are far from "better" solutions.
Just get a mifi/local wifi hotspot from a cell provider.,
To set them up and use them...
Purchase
Turn on
Turn on wifi on iPad
Use iPad

How do you attach multiple pictures to an email? I use yahoo, presently I copy and paste each pic separately , having to go back and forth from my pics and email. I know there's an easier way. I currently use an iPad 2 and this is my first apple product.

I currently use an iPad 2,how does one go about attaching multiple pictures to a yahoo email? Presently I am having to copy then paste each picture
Separately , going back and forth from my picture roll to my email. I tried to copy and paste multiple pictures but it would only paste the last picture
I copied. I am new to apple, so any help would be appreciated .

If you use the Mail App and configure a Yahoo account you can then select up to 5 pictures from the Photo App and mail them as a single e-mail.

Using Ipad2 in Canada and Mexico

Does the unlocked 3g/wifi enable me to use it both Canada and Mexico. Which carriers would I need to contact and do they need to supply me with a special sim card?

You should be able to roam on local networks with either the AT&T model or the Verizon model in both countries. That may cost you an arm and a leg. Here in Mexico you can buy a local TelCel SIM card for MN$150, that should work with the AT&T model. There are instructions that you can find with a web search for how to cut the SIM card to micro-SIM size to use in your iPad 2.
http://www.touchuserguide.com/2010/04/05/how-to-make-your-own-ipad-micro-sim/
http://www.engadget.com/2010/05/06/how-to-create-your-own-micro-sim-card-using-a -chef-knife-and-som/
Dah•veed

Hi.i currently use photoshop lightroom 4 and have uploaded books to blurb with no problems but today every time i try to log in to blurb through lightroom to upload the book a msge appears saying "Could not cotact Blurb web service.please check internet c

Hi I currently use lightroom 4 and have never had an issue uploading photo books to blurb.but now when i try a message appears saying "could not contact blurb web service.please check internet connection" my internet connection is fine.please can somebody help me as i need to get the album done as it is a wedding album and the clients are waiting on it.many thanks,Sean.

Hi,
I got this problem sorted and it actually very easy. For some reason the settings on the windows page i use on my laptop conflicted with the blurb/lightroom upload. All you need to do is set up a new windows user page and set it up as admin. You will need to transfer all the photos from the lightroom on your current user page to the new one which can be annoying but at least you will hopefully get up and running again. I hope this helps,
Sean.

I am currently using ipad2 (only wifi) and...

Similar Messages

Maybe you are looking for