I am dealing with TPC and UPD Port mapping

I am trying to find the appropiate values to get an Elgato HD receiver to function at distant WiFi locations. Elgato states that their Public TCP port is 2170, but on my Time Capsule Airport Utility, there are 4 different ports a Public and Private UDP and a Public and
PrivateTCP. I tried to put the 2170 in the private and public TCP but it did not work Any suggestions
Bob

A static IP address is one that is not assigned automatically by your router. You set it in the Network preference pane by clicking the Advanced button, selecting the TCP/IP tab in the sheet that opens, and selecting Manually from the Configure IPv4 menu. Then you have to know what to enter in the text fields. That in turn depends on how the router is set up.
You also need either a static external IP address from your ISP, or a dynamic DNS name for it.
This is advanced configuration, and you need some background knowledge of networking to be able to do it safely. If you really insist on trying it, you should get someone more experienced to help you. I know nothing about the product you're using and can't help with it.

Similar Messages

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
(119682)

Even after doing the recovery of my iphone 4, still i am getting a picture with itunes and usb port in phone. showing only the emergency call

I did a recovery of my iphone4. After extracting, recovery and verifying completing, my iphone restarted. But still i can only see the picture with iTunes and USB port in the iphone 4. Only the emergency call is allowed.
After recovery and re-start of my iphone4 the itunes doesn't detect my phone. What should i do now

DFU Mode and restore again, if it doesn't work, well then...I suggest you try using a custom firmware maker (sn0wbreeze), NOT for the jailbreak, just to try and fix your phone.

What's the deal with iCal and DNS?

So according to the documents, you need a domain name and fully functional reverse DNS, to use the caldav server? What's that all about? Do you really need all that? Why can't you just type in the IP of the server, and connect to the server? Just like connecting to a web server, nice and simple? Most ISP's won't give you custom reverse DNS. My collocation data center does, bust all the calendar servers i've set up, were in small office networks with small mac mini servers. I feel like I'm missing some part of this equation?

Why? Modern IP network security and user authentication is based on forward DNS, and particularly on matching forward and reverse DNS.
More than iCal Server here, Mac OS X Server itself expects functional DNS.
If you're running privately, the easiest approach is the obvious one: [set up your DNS|http://labs.hoffmanlabs.com/node/1436] and be done with it.
Mac OS X Server can get wonky with no DNS and can get particularly wonky with bad DNS. And the authentication services can get particularly cranky in the absence of DNS. (That's why SLS sets up its own very private rDNS environment for itself during the installation, when installed in the absence of local DNS.)
nb: iCal doesn't need the SRV records if you're on the default ports.
Or for running your iCal publicly? You're in a slightly tough spot with your ISP. Try it. Like with the mail server and other services, I'd tend to have issues with mismatching reverse DNS. Or connect into and use a tunnel, as that reduces the "fun factor" with network security and dealing with the yutzes that attack everybody's servers, in addition masking to the rDNS aspects.

Is there a better way to deal with Verizon and my DSL issues?

My family and I have been with Verizon for as long as we've had broadband internet. For the past 5 years or so the internet has been shaky at best. For the most part it works, but a coupe times a year it stops working all together or becomes VERY intermittent (and is usually working by the time I get finished sitting on hold and the test the technician runs shows no problems). Every time I have to wrestle with the "tech support" on the phone and listen to a recording tell me the same things over and over again that never fix my problems.
Every time my internet gets to this point, it requires a visit from a Verizon technician. Usually they go out into the neighborhood and find a length of cable and replace it. Usually that fixes my issues for a while, but I know it will happen again. It always happens again. It seems to me that the entire length of line that my internet runs through is old, and needs to be replaced. Instead of fixing the problem before it actually becomes a problem, Verizon continues to leave me and my family without service for periods of time.
Last week was the most recent time we dealt with this situation, which was fortunately short lived (Only all day Sunday, into Monday when the technician arrived). It's getting VERY tiring dealing with this situation over and over again, and it's getting offensive honestly. To hear the tech support person tell me that I will be charged $91 if the problem is found and is inside my house is ridiculous. I would understand if this was the first time this situation had occurred, or if I frequently reported non-issues. But no, I'm simply reporting the same issue that Verizon has failed to fix MANY times before.
Perhaps the most frustrating part of this, is that we've never been compensated for our lost service. Last year we lost service for an entire week. That's an entire week with no internet service at all. After we finally got it back, we spoke with the billing department and they told us that we would be credited for the week we lost service. At this point, we are yet to see any credit for the time we have been without the service we pay for. Perhaps we would have tried dealing with Verizon again to get our weeks credit, but attempting to contact someone in Verizon seems futile. Unless you're calling sales you end up sitting on hold for extended periods of time, only to be bounced from person to person until you get to someone that has no excuse not to pretend to help you.
Unless something changes, this is Verizon's last opportunity to keep our service. We have dealt with the loss of service followed by the insult of attempting to deal with Verizon's customer support for the last time. Next time it happens (and I'm sure there will be a next time) unless Verizon shows us that they are actually going to correct the problem, we will cancel our service and give our business to the competitor. This post is being written for a few reasons. I'm hoping that perhaps Verizon can give me a better way to contact someone locally when we have a problem (I would LOVE to speak with a regional manager, or even a local manager of some sort), or at least recognize that there is a problem that will end up costing them money.
Thank you,
A long time customer.

I've decided to give up the fight and go to another provider. I have work to do and having to wait at speeds slower than dial up is insane. At least with dial up I'd have some stability. I can't even run speedtest because it won't connect. At hotels, wi-fi, and hanging by blackberry the laptop works fine but to actually use dsl, nope. Multiple machines and multiple browsers - it's all the same worthless bandwidth.
If they won't give you fios then there is no reason to stay. They've been promising me the service is coming for the last 6 years. They could have run it here by now for the postage they've spent trying to get me to switch to it even though it isn't available. Waste, waste, waste ....

How to deal with conflict and potential conflict classes?

Some classes are marked as conflict and potential conflict classes in the Classloader Analysis Tool.
How to deal with them?
How to use suggested solutions?

Not double load them.
Conflicting classes can lead to weird exceptions. One obvious example would be if you package
an older servlet.jar version into your application and use the weblogic classloading features, such
as prefer-web-inf-classes, to tell weblogic to use this class instead of the one provided in the
system classpath. This one example which leads to weird exceptions, such as connot process jsp tag...
If you really need a the version of the jar for your application, you have to test it through and through
so that you know you do not run into weird production errors.

I bought a new MBA and are having problems with HDMI and VGA port

Hi,
I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
Does anyboody has and idea how i will or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
thank you,

Thank you doubr. So what I need is to buy the thunderbolt cable and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
check the link below and you will see the ports the mba has
http://www.apple.com/macbookair/specs.html
if you see the ports that mba has, the two minidosplayport that are recommending do not fit..
So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I need to buy another adapter for the minidisplay ports??
thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

Adtran with voice and data port

I have an ADTRAN (remote location) with a voice and data port (internet). Does the ethernet port plugs into a serial or ethernet interface?
The provider is telling me to plugg it into a hub...I've never heard of that and was curious if anyone has implemented this configuration before.

Options are limited but include.
1. Get a new SIM card from AT&T and reset your voicemail, see if that helps.
2. Reset your iPhone (holding down the top button and home button for ~10 seconds until the Apple logo appears on the screen).
3. Restore your iPhone. If restoring from backup does nothing then next try restore as new and start over.
4. If nothing else works then call Apple or go to an Apple store and they will replace it.

Is there a docking station for the HP Compaq 625 with serial and parallel ports?

Hi
I am looking for a docking station with at least 4 USB ports plus serial and parallel ports for the HP Compaq 625 running Windows 7.
If not, what are the cheapest laptops for which I could find such a docking station?
Thanks
soVision

The TravelSound ZEN X-fi looks like is might work, but it says nothing that it will. If it works I will buy it in second.
Look carefully to Creative's documentation for this docking station. It is not compatible with the X-Fi2 or X-Fi Style.

Dealing with slideshows and lightboxes

I have a site I am working on and I am using a lot of slideshows and lightboxes. The problem I am having is that the widgets are a knightmare to setup and deal with. I guess this is not a bug, but it just feels overly complicated to use at times because of the options and how easy it is to screw something up on them. The lighbox one seems to be the worst offender. Placing the next and previous buttons can be a knightmare becasue I have to align them to not overlap a certain photo, but when I click to move it the widget kicks in and moves to the next photo. I just wish the widgets were a bit easier to use right out of the gate. I am getting good at using them, I just think they could be better laid out for ease of use.
All that said I love this program and plan to buy, and thanks for listening to my rant.

Thanks for the feedback. We'll be working to streamline Muse's UI, widgets included, in the future to make things easier to work with.

Is there a way to connect my MacPro (with DVI and Display ports) to the new Thunderbolt display?

I'd like to connect these devices together.

As Kevin J. Doyle points out, the displays from NEC are better than what Apple has to offer for graphics. For video, you'll need a broadcast capable monitor for accurate color correction. Not a computer monitor.
The 24" model is under $1,000 and it include color calibration items. It has both DVI and Display Port connections. The base can be raised/lowered as well as tilted. (the Apple display does not)
http://www.bhphotovideo.com/c/product/822739-REG/NEC_P241W_BK_SV_24_Widescreen_P rofessional_Graphics.html
They have other sizes and resoltuions as well.
Here's a review on the NEC displays.
http://macperformanceguide.com/RecommendedDisplays.html

Smartforms - dealing with decimal and thousand separators

Hi,
trying to reuse one of the standard SAP Smartforms - LB_BIL_INVOICE in an ECC 6.0 Unicode system I faced a problem with decimal and thousand separators for currency/quantity fields. In fact, default settings in User profile are not taken in consideration when printing this form. I have changed all the possible settings in the user profife and (after logoff/logon) nothing changes in my output.
Just to be sure I tried to output the invoice with the original SAP smartform LB_BIL_INVOICE and the things were the same - means output takes wrong settings for decimal/thousand separators.
For clarity I created a simple form with a single currency field and everything behaves well as expected. So this points me to the direction fo find out what is wrong with the LB_BIL_INVOICE. I downloaded the form into XML and checked the code, further uploaded it into a new one - no success.
My question is:
Is there a way to manipulate or overwrite default settings for decimal/thousand separators within smartform, and if yes - how to do this?
I almost finished my quite complex form and wouldn't like to rewrite it from scratch.
FYI: I'm not a Smartform expert, by have created/overwiten more than 15 different forms accros different systems - 4.6 C/D, 4.7, ECC 6.0 non-Unicode/Unicode, and never faced such an issue.
I faced significant smartform 'improvement' in the ECC 6.0 release - especialy for text elements. The new integrated MS word control gives me a lot of throubles. According to this - is there an up-to-date documentation (even link to SAP course is acceptable) according to Smartform development in ECC 6.0?
Thanks in advance.
Regards,
Ivaylo Mutafchiev
Senior SAP Abap Consultant

Hi,
I took a quick glance into the print program, and the print program do a set country setting to reciving country. This will give you the separators that are confugured for this country.
But if you change the print program and clear parameter country, the smartform will use the users settings instead.
Regards
Åsa Thenstedt

I have been dealing with crashing and freezing issues on my iMac for 6 months. A supervisor has been assisting me but the issue is not getting fixed. The computer was under when the issues started. He wants to get us a new computer but is not allowed.

Our iMac was under warranty when it began freezing and or crashing. I have spent several hours on the phone with a supervisor and had the machine in 2x. We have also had a repair done in our home. The problems persist. We feel apple owes us a new computer. Help!!!

Do you have a written record of your attempts to get it repaired? When you took the machine "in" for repairs, did you take it to an Apple Store or to an Apple Authorized Reseller or Repair Facility, and do you have copies of invoices or statements showing what repairs were made? If the answers are yes, you need to be persistent in attempting to get a new computer. Ask to talk to the supervisor's supervisor to "escalate" the complaint to a higher level. Get copies of all your repair information and send a letter to the Apple Customer Service people in California and ask them for help.
If your iMac was under warranty when the problems started and the problems have not been resolved, your position should be that the problems should still be fixed or the computer replaced even though the warranty may have expired in the interim. Do you live in the US? If yes, your home state has a Consumer Protection agency. File a complaint with them and ask for their assistance in mediating and/or resolving the matter.

What is the deal with MP4s and Itunes?

Why does quicktime and Itunes always put "This document could not be opened"/"Quicktime does not support this file type"/"An invalid public movie atom was found in this file". Only about 2 movies have work in Itunes, and one became corrupted and kept making itunes close whenever I played it. WHAT DOES IT WANT? It says it wants MP4/M4V and I've tried both.

What movies? From what source? While mp4 is more restrictive than some containers it can still hold many variants of audio and video. iTunes is limited in codec support.
iTunes: Frequently asked questions about viewing and syncing videos - http://support.apple.com/kb/HT2729 - including file formats supported by iTunes and on mobile devices, DVDs, etc.
What video content works with iTunes and mobile devices?
iTunes:
Video content purchased from the iTunes Store.
QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
Video podcasts.
iTunes Digital Copies.
iTunes Store Movie Rentals (Requires iTunes 9 or later).

Problem with JNI and Parallel Port dll

Hi. I'm doing some testes with JNI. Firs i followed the netbeans tutorial for doing a C programa that prints somthing for java.. like.. "Hello java from C".
So i tried to load a dll from my dll. Like, I have this dll to use the parallel port on windows Xp. So i created a dll to access it an comunicates eoth java.
I did everything just fine.
When I start my Java app, the first thing it does is to load this parallel port dll and configure the functions of it.
After that .. I get this error
EXCEPTION_FLT_STACK_CHECK (0xc0000092) at pc=0x0093d269, pid=2284, tid=3000
Can someone explain why ?
(Sorry if i wasn't clear enough, english is not my native language, so ask if you don't understand something.. )

hi ,
I met the same problem this morning, and searched the www.google.com in order to solve it, as a result, your article was shown on my screen. :)
Till now I have read some technical information and solved my problems. Maybe the solution be useful to you:
==============================
error message : (Environment : Tomcat 5, Windows 2003, Mysql5)
2006-3-29 11:53:48 org.apache.catalina.core.StandardWrapper unload
message: Waiting for 2 instance(s) to be deallocated
==============================
cause: the number of connection to database exceeded.another word,too many connections.
==============================
solution: close the connection when it becomes useless for your program. :)
==============================
ps. Sorry for my weak English . hehe ....

I am dealing with TPC and UPD Port mapping

Similar Messages

Maybe you are looking for