I am extremely frustrated with the inability to get answers on why my revel stops uploading.
The message is the upload has been interrupted, please open revel to continue the upload. I don't know why it is stopped and I open revel and nothing happens. My photos no longer upload from my photo stream since I downloaded ios7.
Help!
Are you are leaving your iOS revel app open until the upload completes? If you do not, it will only upload for 10 minutes and then pause until you open it again. Are you using autoupload or uploading manually? Can you try leaving the app open until uploading is complete? You also need to have it set to the appropriate library. whichever one is open is the one that can upload. Others will be paused.
Pattie
Similar Messages
-
I use only an external monitor as my set up will not allow me to use both my Macbook Pro monitor and external monitor efficiently at the same time. In the past, I would plug my MBP into into my external monitor with the lid closed, wake it up and then open the lid with no issues. It was kind of a pain in the rear but at least it worked. Now, opening the lid activates both the MBP and external monitors automatically instead of leaving the MBP monitor off.
This is an issue because, well, look at the speed test that results from simply closing my MBP lid:
Look at that MASSIVE drop in speed. I need to use just one monitor. Upon googling my problem, it seems to be widespread problem. At least there was a way to get around it before the screens autmatically changed...Support today quoted Apple's engineers as saying it is "expected behaviour" in Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
This is despite:
- obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to, say, a 27" cinema display
- wifi connectivity benefits of having the lid open
- the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy or you need it open for wifi)
- negative longer-term impact on the battery and components from running the MBP hotter than it needs to be.
For any chance of getting the previous behaviour back, we need to ask Apple to change how Lion handles clamshell mode. Options may include changing Lion's expected behaviour or adding a user-selectable option within System Preferences. Now the situation has been clarified as intentional, user feedback on this issue has become all the more important.
http://www.apple.com/feedback/macosx.html
In the meantime, a low strength fridge magnet placed on the inside surface along the right hand edge (perhaps above the Kensington lock slot) may serve to convince a MBP that the lid is still closed. It's not something I'd recommend or do personally, but some others are reportedly finding this helpful in the immediate short term. -
HT4972 the apps weve downloaded are not working. please help, extremely frustrated with our ipod 4
the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4
See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...
Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.
-
I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the least very disappointed with such horrible service
Which service did you subscribe to? Adobe PDF Pack?
Once I know the service that you subscribed to, I can move this post to the right forum so that you can get in touch with the folks who can assist you. -
I am frustrated with the Bookmarks. I want so much to be able to right click and alphabetize the list. It's been a year and I can get my mind around the process that's there. Also I'd love for those pesky little icons to disappear. Help me please.
After the release of Firefox 29, several people noticed that after using the Customize feature, most items on the right-click menu for the Bookmarks menu on the menu bar became ''grayed out'' and unusable until you closed and started Firefox back up again. That seems to still be a problem for me in Firefox 36.0.4, so if you used Customize, that could be the explanation.
You still should be able to click and drag bookmarks around the menu even with the broken right-click context menu.
And if it's easier than restarting, the context menu still works in the Bookmarks Sidebar (Ctrl+b to open/close) and Library dialog (Ctrl+Shift+b or "Show All Bookmarks"). -
Very frustrated with the battery exchange program
I'm very frustrated with the battery exchange program. I signed up online, double checked all my information, and submitted. No where on the page did it say that a signature would be required upon delivery. I work during the day, so I'm not home to receive shipments (any package I do receive is just left in the lobby, and it's always been fine--I live in a secure building).
DHL is refusing to leave the package at the door. Apple refuses to tell DHL that it's ok to redirect the package to my place of employment. My only option, it seems, is to spend almost two hours of my time driving to the DHL location and back (the pickup location isn't even in the same county I live in).
If anyone has any better ideas, I would love to hear it.
Thanks,
AndreaIf your battery was stolen after it was delivered, I'd bet you'd really get upset. If DHL is anything like UPS, you can sign the receipt telling them to leave the package. Pretty simple.
-
i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled....... -
My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?
That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
MichaelgfrommetFor what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message
Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev -
I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!
Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
Mac OS X: Gray screen appears during startup
Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS). -
Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?
When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
With the new ipad coming out soon, why should I buy the ipad 2?
with the new ipad coming out soon, why should I buy the ipad 2?
I can only echo what Pogo says about buying based on what it does today.
3 weeks ago I bought a Mac Mini. A new Mac Mini model has been rumoured to come out anywhere between the same week I made my purchase and the end of August. None's been released as yet.
I wanted one in the week of June that I bought mine so I bought it based on the fact that it did what I wanted and I couldn't imagine anything which could be added that I'd want - my MacBook Pro doesn't have Thunderbolt so the most likely addition isn't really going to be much use for me.
Basically you have to buy what you what based on what's out at the the time.
I can promise that within seconds of the iPad3 being released, the web will be full of rumours about the next one!
Maybe you are looking for
-
How to fail messsages when timeout exception is thrown in BPM?
Hi In my BPM, if the time out exception is thrown in BPM, in SXMB_MONI, all the inbound messages' staus is 'processed sucessfully' ? How can I make the message fail? With a red flag or anything indicating exception? In my design I used deadline bra
-
I have a Lumia 820 and updated the firmware to the Amber update yesterday, about half of the new features aren't on there and it has removed some features that were on there before. Most noticably the double tap to wake. I've tried rebooting and it s
-
Confirm that the String is hh:mm:ss format
I create a Jdialog that I wish that it could input time of someone entering in my house. I use jTextField2.getText() to get the String. How could I confirm if it is "hh:mm:ss" format? and would you like to tell me the standard method in Java to deal
-
To achieve high availability by eliminating single point of failures in the following areas we are thinking of having our OLTP DBs on a single 10g RAC cluster i) OS/Firmware patches requiring reboots ii) Unplanned server failures iii) One-off Oracle
-
When I attempt to purchase I get the "network connection timed out" message. I fact I cannot access any of the iTunes email or online help as it cannot connect, either. Solution?