I am facing a problem in passing multiple values as out parameters from fo

Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.

user9041629 wrote:
Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.Probably not a bad thing that this isn't working for you.
This is a horrible way to return the contents of a table.
Are you doing this for educational purpose, or ... what is your goal here? If you just want to return a result set to a client you'd want to look in to using a REF CURSOR and not a bunch of arrays combined with horribly procedural (slow) code.

Similar Messages

Problem in passing multiple values between reports

Can anyone help me in passing multiple values in prompts between reports in CRYSTAL REPORTS 2008 using opendoc or any method. I am able to pass single value from main report to second report. but not able to pass multiple values. Plz help me . Thanks in advance

Hi Ramy,
How you are passing your prompt values ? where you have created these prompts ? i.e. created these prompts in report level or stored procedure or Add command ?
Thanks,
Sastry

SSIS-How to pass multiple value to stored procedure from table row one by one using ssis package??

I want to execute a stored procedure using ssis.But the problem I am having is that there is a table with 200 rows with only
single column.Now i want to execute stored procedure using value one by one from table .once the stored procedure is executed with top value from table i also want to delete that topmost column value and execute with next table value.and store the result in
text file.
please help me..or provide a package.

If you want to do it in SSIS, a way to do this is by using For Each Loop as mentioned above.
Create 1 OBJECT type variable (list of values) and one STRING type variable (one value at a time)
Use EXE SQL Task with ResultSet = FULL RESULT SET and query = SELECT COL FROM TABLE ORDER BY COL ASC...output this to the OBJECT type variable
Next, a For Each loop container with Foreach ADO Enumerator, ADO object source variable = Object type variable and map that to String type variable with index = 0.
Within your for each loop container, select another EXEC SQL Task and pass in an input parameter (the String type variable) and query = EXEC PROC ? -- WHERE ? = String type variable.
This will execute your store procedure just for that one value out of the whole list.
Now within the same For Each loop, select another EXEC SQL Task and again pass in an input parameter (the same String type variable) and query = DELETE FROM TABLE WHERE COL = ? -- WHERE ? = the current value
The above process should A) get the list of values from the table B) pick one value at a time and execute the proc and delete and right after delete that value from the table.
Hope this helps.
-- some further investigation/tweaking may require but it should help you get started.

Passing multiple values to a parmeters in SQL Query

Hi friends,
I have the following requirement -
I need to pass multiple values to the parameter 'WHERE hou.name = (:id1)' and the query is copied below for your reference .
SELECT partno part_num,
     customer customer_name,
     hou.name op_name
     FROM hr_organization_units hou,
     oe_transaction_types_all sot,
     ra_customers rc,
     ra_addresses_all ra,
     ra_site_uses_all rsu,
     oe_order_headers_all h,
     oe_order_lines_all l,pwr_sod50 ps
     WHERE hou.name = (:id1)
-- and hou.name = (:id4)
--hou.name in ('CPS FRANCE','CPS GERMANY')
--and hou.name = (:id1,hou.name)
     and trunc(ps.sch_ship_date) between nvl(:id2,trunc(ps.sch_ship_date)) and nvl(to_date(:id3)+.99999,trunc(ps.sch_ship_date))
     and ps.group_id = 9999999
     and hou.organization_id=h.org_id
     and ps.line_id =l.line_id
     and l.header_id =h.header_id
     and h.invoice_to_org_id=rsu.site_use_id
     and rsu.address_id =ra.address_id
     and ra.customer_id =rc.customer_id
     and h.order_type_id =sot.transaction_type_id
Looking for your help on this.
Thanks In Advance.
Thanks & Regards
Ramya Nomula

Hi karthik,
I am sorry for the wrong updation of my anonymus block.
My requirement is to pass a multiple values to the parameter in SQL query, and here is the code which is working now for the multiple values with ourt single quotes to the values -
SELECT partno part_num,
     customer customer_name,
     ps.customer_id customer_id,
     avail_qty avail_qty,
     sch_ship_date schedule_Ship_date,
     so_num order_no,
     h.header_id header_id,
     line_num line_no,
     l.ordered_quantity ordered_quantity,
     scd_qty qty_open,
     s_price unit_price,
     part_flag flag,
     sub_inv subinv,
     sbu,
     hold,
     qoh,
     line_detail_id detail_id,
     picking_line_id,
     picking_line_detail_id,
     rc.customer_name cust_name,
     rc.customer_number customer_number,
     rsu.location location,
     sot.attribute5 order_type,
     ps.line_id line_id,
     h.transactional_curr_code transactional_curr_code,
     hou.name op_name
     FROM hr_organization_units hou,
     oe_transaction_types_all sot,
     ra_customers rc,
     ra_addresses_all ra,
     ra_site_uses_all rsu,
     oe_order_headers_all h,
     oe_order_lines_all l,pwr_sod50 ps
     WHERE ','||:id1||',' like '%,'||hou.name||',%'
     and trunc(ps.sch_ship_date) between nvl(:id2,trunc(ps.sch_ship_date)) and nvl(to_date(:id3)+.99999,trunc(ps.sch_ship_date))
     and ps.group_id = 9999999
     and hou.organization_id=h.org_id
     and ps.line_id =l.line_id
     and l.header_id =h.header_id
     and h.invoice_to_org_id=rsu.site_use_id
     and rsu.address_id =ra.address_id
     and ra.customer_id =rc.customer_id
     and h.order_type_id =sot.transaction_type_id;
Condition for sending multiple Oprtaing Units -
WHERE ','||:id1||',' like '%,'||hou.name||',%'
This above condition is working when i am passing multiple values with out single quotes...but not working for multiple values with single quotes.
Sample queries tested -
select 1 from dual where ',aa,bb,cc,' like '%,bb,%' (This is working)
select 1 from dual where ','aa','bb','cc',' like '%,'bb',%'(This is not working).
Thanks In Advance!
Looking for Your Great Help.
Thanks & Regards
Ramya Nomula

Passing Multiple Values from Multi Select

Hi,
My requirement is simple. I have created a simple Multi Select Option in parameter form and i want to send multiple selected values from the multi select option (in parameter form) to reports.
eg:
I want to send multiple countries code as input .........'US', 'CA', 'IND', 'UK'
Can i do it in Oracle 6i reports, Thanks in Advance.
Regards,
Asgar

Hi Thanks Again,
For such a nice response. I got the Lexical Where condition properly running but still getting problems in catching the multiple values to be passed from form. just i will give u an insight of wat i have done:
SQL:
SELECT ALL FROM EMPLOYEES &cond_1* -- Working FIne
in my Html Parameter Form i have an Multi Select component (the Problem is here) it is not passing more than i value from the form once i am accessing it from web or running it in paper report. In paper report layout it is not allowing me to select more than one value. but in HTML it is allowing to select multiple values but at the server end (After Parameter Form Trigger) it is giving a single value not multiple values.
In PL/SQL when i checking the length of country_id i m getting it as one.
Here is my SQL code
srw.message(10, LENGTH(:country_id_1));
:cond_1 := 'where country_id = '''|| :country_id_1 ||'''';
This is passing the condition properly to SQL but only with single value but i want to pass multiple values
I am struck in this+_
WHERE CONTRY_COLUMN IN ('USA','UAE') -- This variable you have to pass from you form...
Here as you said you gave multiple selection in your parameter form to generate report. So before generation report just prepare variable like this as it is bold above.
and pass parameter through your runtime form to the report as you pass the normal parameter...liket this i gave you example...
ADD_PARAMETER(PARAMETER_LIST_NAME,'P_CONT_PARAM',TEXT_PARAMETER,vString);
Sorry for troubling you for a small thing but please help me to solve this issue.
Thanks Again............
Asgar.

Passing Multiple Values from a worksheet to PL/SQL function.

Hi All,
Is there any way to pass multiple values selected in a worksheet to a PL/SQL function ?
I will try to explain the scenario:
We have a crosstab report that showing all the customer details, deposit sum of a customer in each date in a date range selected. With the customer details we are showing the Rank of a customer based on the deposit in the latest date selected. Filtering is based on the rank, ie Top50 or Top60 etc.( As I said rank is calculating based on the deposit in the latest date).This is working fine.
Now the new requirement is to : For example, in Top50 report, list all the customers, who were in the Top50 list, in any of the dates selected. We are able to display the daywise rank, but when giving a condition like daywiserank <= 50, the result becomes uncertain. Some blank lines, wrong amounts etc..
As a work around we tried to find out the rank in a PL/SQL function. But the issue there is : we have some multiple value parameters used in the worksheet.
Is there any way to pass multiple values selected in a worksheet to a PL/SQL function ?
Or any other work arounds for the scenario explained?
Reagrds,
Jeneesh

Hi Russ,
Thanks for the response.
Russ Proudman wrote:
1. I thought there was an analytical function similar to rank - or maybe an option of rank - that if there are duplicate records to have them all considered the same rank. So if you had 3 records all the same as rank=2 then a condition saying where rank=2 would return the 3 records. You could check into this.
We are already using DENSE_RANK. But the issue is the output contains incorrect null values nd repeated rows.
We got it solved as I explained in the previous post. But will that AGGREGATION MODE setting ( Which discoverer says - not recommended) have any issue? I mean side effects?
Russ Proudman wrote:
2. Another thought is that you can create a PL/SQL routine - that's called from a SQL function registered in Discoverer - where a table is created that does the first part of your query. Then a worksheet is created to use the data from that table. So, in essence, the table would have your top50 ranked customers. Then you can write any kind of worksheet against that table. However, DBAs are loath to allow tables - that they didn't create! - many times in a PROD environment.
Here also the same problem will occur: as the top 50 will depend upon the parameters. I cannot pass those parameters to PL/SQL Function.And storing the top50 ( itmay be top100 or to 150 also) for all combinations of the parameters is impossible
Russ Proudman wrote:
3. Finally, are you sure you're rank function is correct in that if you're getting blank lines, maybe the 'over' part is not considering all columns needed to determine the rank?
Yes the query we are using is correct. The output QUERY of discoverer gives correct results in Sqlplus.
Regards,
Jeneesh

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

How to passing multiple values for a parameter of discoverer(url parameters

Hi All,
I am trying to pass multiple values for a parameter of disco report. I am trying to include my url for discoverer viewer report. the values has the following
'jeff,mark'
'sfophiee,angela'
Thanks and Regards
Venkat

Hello Venkat,
I know there are some problems with 10.1.2.0.2, maybe if you haven't done yet you can try with 10.1.2.2, assuming this version should be working for multiple parameter values :
OracleAS Discoverer 10.1.2.2 is installed with the following patch :
Patch 4960210 PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
So, once installed you can try adding your parameter as param_<parameter_name>='sfophiee,angela'
Hope this helps, otherwise feel free to log a Service Request to Support.
Best Regards,
Gianluca

Passing multiple values in a parameter through IN operator

hello everyone,
i want to know wheather it is possible to pass multiple values to a report parameter and use the parameter in the query with the IN operator.
I feel this should be possible but dont know the way.
Pls help

i have also suffered from this problem. you can solve it by creating a table like
create table abc
id number,
value number;
then follow the steps.
1) insert all the values in this table by incrementing id and values
2) then pass lowest id and larget id to the report
3) now in report use the select statement like
SELECT * FROM AAA WHERE ABC IN (SELECT VALUE FROM ABC WHERE ID BETWEEN V_MAX AND V_MIN)
4) IN THE REPORT'S AFTER TRIGGER, YOU HAVE TO DELETE
THESE TEMPORARILY CREATED ROWS
LIKE
DELETE ABC
WHERE ID BETWEEN V_MAX AND V_MIN;
SO THIS WILL SOLVE YOUR PROBLEM.

About passing multiple values in parameter for oracle report

https://docs.google.com/file/d/0B0dx7wf68mD0QzdpbWU4UGNURTQ/edit
Hi all,
i want to pass multiple value using , to separate them 1,2,3....
here is my query
SELECT DISTINCT
oh.header_id
,oh.org_id
,to_char(oh.ordered_date,'DD-MON-YYYY') d_date
,to_char(oh.ordered_date+31,'DD-MON-YYYY') d_validity
,oh.ship_to_org_id
,oh.invoice_to_org_id
,oh.cust_po_number d_po_num
,rcust.customer_id AS customer_id
,oh.order_number d_salesorder_no
,oh.cust_po_number d_project
,oh.attribute1 second_addr
,oh.attribute2 remark1
,oh.attribute3 remark2
,substr(oh.transactional_curr_code,1,3) as currency
,tyl.name ordertype
,oh.salesrep_id
,rat.name as d_payment_term
,rat.description d_payment_desc
,rsa.name
,rsa.email_address as sales_phone
,rcust.customer_name||' - #'||rcust.customer_number d_to_custname
,rcust.customer_name d_cust_sign
,rcust.attribute1
,rcust.customer_number
-- ,raddr.ship_to_flag
,oh.sold_to_contact_id AS attn_id
,rcust.party_id
,tyl.name AS SO_type
-- ,net_org.ORG_LOGO
FROM
oe_order_headers_all oh
,ra_customers rcust
,ra_addresses_all raddr
,ra_site_uses_all rsite --double_line
,ra_terms rat
,hz_party_sites hps
,hz_contact_points hcp
,ra_salesreps_all rsa
,oe_transaction_types_tl tyl
-- ,apps.ar_contacts_v acv
-- ,net_org
WHERE oh.sold_to_org_id = rcust.customer_id
AND oh.payment_term_id = rat.term_id(+)
--AND        rcust.customer_id = acv.customer_id(+)
AND oh.salesrep_id = rsa.salesrep_id
AND oh.order_type_id = tyl.transaction_type_id
AND rcust.party_id = raddr.party_id
AND raddr.address_id = rsite.address_id
AND rcust.party_id = hps.party_id
AND hps.party_site_id = hcp.owner_table_id(+)
AND hcp.owner_table_name(+) = 'HZ_PARTY'
--AND        hcp.contact_point_type (+)='PHONE'
AND tyl.LANGUAGE = userenv('LANG')
--AND          raddr.ship_to_flag IS NULL
AND upper(tyl.name) in ('SW SALES CONTRACT','SW-NSC SALES CONTRACT','TILES SALES CONTRACT','VBP SAMPLE ORDER', 'VBP INTERNAL ORDER')
AND oh.order_number =:P_CONTRACT_NO
and oh.org_id = :P_ORG_ID
--and            net_org.org_id = :P_ORG_ID
&CP_Param
and after para form
function AfterPForm return boolean is
begin
:CP_Param := 'where oh.order_number in ('||:P_CONTRACT_NO||')';
return (TRUE);
end;
it said ora-00933 but my query can run i dont need the multiple values para, can anyone help me how to modify the report so it can pass multipel values thanks

HI I tried changing the parameter width to a larger value, it can output , and the field where I show the order_number i used source P_CONTRACT_NO,
it will display as 102005000,102005001 and I also tried using the column from the query directly, it will be separated , it has some other problem
I have the header part and main part,
and also there are page numbering, with the order number field set as order_number it will output single number , but the page order is wrong
102005000,102005001 will be like header page: 102005000 1/4 102005001 2/4, main page 102005000 3/4, 102005001 3/4
DO you have any idea how I can set the page numbering setting so it will output as header page:102005000 1/2 102005000 2/2
header page:102005001 1/2 102005001 2/2
?? thanks

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

How can i pass multiple values by a single variable to EXECUTE IMMEDIATE

Hi All,
I want to pass multiple values for where condition for execute immediate. Something Like this:-
bold
Declare
v_cond varchar(1000);
Begin
v_cond := '''INR','USD'''; --(OPTION 1)
v_cond := 'INR,USD'; --(OPTION 2)
EXECUTE IMMEDIATE 'Delete from table where colm in (:v_cond)' using v_cond;
END;
bold
I am using this into a procedure
Now option 1 gives an error ie a syntax error (; expected or something like that)(I am sorry, i can't tell the exact error here as i am not in the office right now)
and option 2 makes the procedure execute but obviously doesn't delete the records, as it takes the whole as one.
Please Help
Regards
Neeraj Bansal

See the links containing examples under
*7. List of values in an IN clause?*
SQL and PL/SQL FAQ
from the SQL and PL/SQL FAQ.

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Passing multiple values to a parmeters in Discoverer 4i

Hi Friends,
I have a requirement of passing multiple values (Operating Unit Names) to the parameter(P_Opr_Unit) in Discoverer.
I am using PL/SQL function to get the data in Discoverer.Function is working fine for multiple values from Database(SQL Developer).
When i am trying to pass multiple values from discoverer ...it is accepting only the first parameter value of Operating Unit.
Need your Expertise on this issue.
Thanks In Advance.
Thanks & Regards
Ramya Nomula

Hi,
You can only pass one parameter value into a function. When you have a multi-valued parameter it enables you to create the condition: item IN (:param) which Discoverer expands to the condition: item IN ('val1', 'val2', 'val3') where these are the values the user has picked from the list of values.
Now if you have a calculation containing a function and a parameter: my_func(:param) then Discoverer has to map the parameter in the function an item in the worksheet. So if the param is from a multi-valued list it can only pass one value and so expands the calculation to my_func('val1') where val1 is the first item picked from the list.
Rod West

I am facing a problem in passing multiple values as out parameters from fo

Similar Messages

Maybe you are looking for