I am facing an unkown error with my iphone (0xE8000065)
please i need help with my iphone 4 because i am facing an unkown error with my iphone (0xE8000065) and i could not solve it
Hey buddy,
Did u solve ur prblm bcs am still have the same prblm and I cant solve til now
Similar Messages
-
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points -
I have some error with my iphone 5 in black screen nothing shown
i have some error with my iphone 5 in black screen nothing shown nothing do no restart and when i have restore my iphone it say error 4014????????????
is this the original iPhone 5, or 5s? If it's the 5s do you have Apple Care still? If so calling Apple iPhone support is where to start, hopefully they can help, if not, setting up an appointment at the Genius Bar at an apple retail store is a good option too, Call the store first though and ask what your options are in terms of warranty and service. If you are having problems with the regular iPhone 5, still call Apple Care or an Apple store and see what they can do.
good luck!
K? -
HT4061 my iphone not connented with itunes unkown error is disply 0xe8000012 so please help me
my iphone not connented with itunes unkown error is disply 0xe8000012 so please help me
Read here:
http://support.apple.com/kb/TS3221 -
Conntrans error with SENDING messages
Hello everybody.
Still using a CRM 4.0 SR01 SP08 build, this time I am facing a Conntrans error : sending messages keep failing, while the reception process is OK.
If I select "SEND & RECEIVE", the SEND status becomes orange, RECEIVE is blue (OK) and I get in the summary the error related to the failure. Synchronizing another time gives the same result. When I close Conntrans, I get a "GUI MFC Error" crash popup.
If I select "SEND only", the SEND status stays gray and I get the error related to the failure. When synchronizing again, I get a "GUI MFC Error" crash popup while in the background the SEND status becomes orange, with the error related in the summary.
What we have tried so far is :
- deleting the 1st message from outbound queue (table = MW_Q_OUT, where MSG_ORDER = 1 ), gave no result
- testing connections to Comm Station : connection is OK
- launching the Check Environment from the Client Console : it reports that ADO version seems to be less than 2.5, and the registry setup is not complete (it misses HKLMsoftwaresapmtsoptions) but as all was working before, I don't think it is very important.
Here follow the data from the logs :
c:TempDotNetQmtClient.log
22/02/2007 09:48:50 : PushFirstTime ('CRM_SITE_000000000000503', '', '0', 3)
22/02/2007 09:48:50 : GetMessageCountToSend : Found 50 message to send.
22/02/2007 09:48:50 : Updating pending confirmation table for queue CRM_SITE_000000000000503
22/02/2007 09:48:50 : TransferPushMessages (2, 20)
22/02/2007 09:48:50 : Total messages read from the out queue : 20
22/02/2007 09:48:50 : Sending data to the server without compression.
22/02/2007 09:48:50 : Sending messages to server : Single_Send
Error In TransferPushMessage() : Type is not resolved for member System.Data.SerializationFormat, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089.
22/02/2007 09:48:57 : PullFirstTime (CRM_SITE_000000000000503, )
22/02/2007 09:48:57 : ConfirmMessageRecvd ()
22/02/2007 09:48:57 : LastReceived MsgOrder = 0
22/02/2007 09:48:57 : TransferPullMessage (20, 0)
22/02/2007 09:48:57 : PullMessage LastTID : 0AF90185-0998-0059-45DC4AA3
22/02/2007 09:48:57 : Next Pull: msg_count = <20> msg_size = <0>
22/02/2007 09:48:57 : TransferPullMessage : ActualPullMsg = <0> ActualSizeRcvd = <0> MsgOnServer = <0>
22/02/2007 09:48:57 : Calling Confirm Messages after Recv end !!
22/02/2007 09:48:57 : Confirming unprocessed messages to server
22/02/2007 09:48:57 : ConfirmMessageRecvd ()
22/02/2007 09:48:57 : LastReceived MsgOrder = 0
22/02/2007 09:48:57 : GetReceiveStatistics (...)
22/02/2007 09:48:57 : GetSendStatistics (...)
22/02/2007 09:48:57 : Finish (0, 0, 296, 62, 0)
22/02/2007 09:48:57 : Finally ()
C:Documents and Settings feugierLocal SettingsTempTransferService.log
868 828 ! Entering PreConnect
868 828 ! Entering BeforeTransfer
868 828 Thu Feb 22 09:48:50 2007 ! Initialization for Site 'AE08F6F235D1C84BA36C73DE2CA25F54' succeeded, Server version info: - unknown -
868 828 ! Leaving BeforeTransfer with 'OK'
868 828 ! Entering Transfer
868 828 ! Entering PushTransfer
868 828 ! Entering 'PushMessages' for queue 'CRM_SITE_000000000000503' / limit 20 messages
868 828 ! First time: Messages found to send in Outbound Queue: 50 (125 msecs)
868 828 Thu Feb 22 09:48:57 2007 E
ERROR in TransferService - Send: 'Send' call to Communication Station/CRM Server
failed with fffffffb:
(null)
868 828 E
NO ERROR POPUP DISPLAYED !!!
868 828 E
_TransferPushMessages failed with fffffffb
868 828 E
Process modules loaded:
108 modules found in process:
Location Module name File version Prog.version File size File date/time
00400000 C:Program FilesSAPMobilebinConnTrans.exe 1,210,863,0 1,210,863,0 376895 17.11.2004 18:07
011a0000 C:Program FilesCommon FilesSystemadomsado15.dll 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 565248 25. 3.2003 12:00
01230000 C:Program FilesCommon FilesSystemOle DBMSDASQLR.DLL 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 16384 25. 3.2003 12:00
01ed0000 C:Program FilesCommon FilesSystemOle DBoledb32.dll 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 512000 25. 3.2003 12:00
01f50000 C:Program FilesCommon FilesSystemOle DBOLEDB32R.DLL 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 69632 25. 3.2003 12:00
01f70000 C:Program FilesCommon FilesSystemOle DBmsdasql.dll
{...} follow the list of what I think to be all the stuff loaded at that moment...
If anyone has a clue, a hint, a solution...
Thanks and Regards,
FrançoisIf you require Framework 2.0, upgrade to SP07. In this support package conntrans becomes compatible with 2.0.
EDIT: Sorry you are using 4.0, I meant SP07 for 5.0
Message was edited by:
João Sousa -
Unkown error while updating to ios8 or restoring
A few days ago my Iphone 5 screen went black and would not turn on or anything but it would still vibrate and if i held down the home button the little siri sound would go off. This had happened once before a short while ago and i just let the phone die all the way then charged it and it worked fine so that's what i did this time. When it came back on this time though, it was still just black but it would also be flashing the apple logo. I tried a bunch of things that people were suggesting online and watched youtube vidoes but nothing seemed to work, also every once in a while it would go to the lock screen and i swiped and pushed home and stuff and nothing would happen it just said it was searching where it would usually say verizon. Once while the screen was doing this i held power and the home button which is what many of these youtube videos said to do and it worked, telling me to connect it to itunes for the recovery process. Once it was connected to itunes i tried to update it to ios8 and it seemed to be working at first but then it said unkown error and when i tried to restore it the same thing happened, i tried both of these multiple times with the same result. The nearest apple store is an hour away and i don't have a driver license so that's really a last resort for me, i'm hoping someone knows whats gonig on with my phone.
when it provide an unknown error it usually give an error number too
-
The operation cannot complete because of an unkown error while exporting to png
Adobe Illustrator CS5
Windows 7 64bit
I am getting the following error while trying to export a png
"The operation cannot complete because of an unkown error. [13]"
I tried disabling all startup items, rebooting, copying and pasting to a new document to no avail.
Please helpHere is what I tried and it worked
Save the file as pdf with the "Preserve Illustrator Editing capabilities" checked. Rename the file from .pdf to .ai
New file can now export without any problems.
Wierd. But thanks to everyone who posted -
when i plug my iphone or ipod in they do not show up, when i click on itunes store it says unkown error -3212
someone please help me i tried just about everythingMacafee security center is may be the culprit.
Open Macafee then: select;
Internet & Network > configure
Firewall > Advanced
Programm Permissions > scroll down to Itunes
Highlight (click on)
Then Grant full access to Itunes.
APPLY then OK
When you select store from Itunes you will need to register with Itunes.
Try that or:
Disable your firewall.
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question" -
"The iPod cannot be updated. An unkown error occured. (-36)"
Hi, can someone help me with this? I've been browsing troubleshooter and topics for days and yet I can't figure out how to fix this one. This occured when I've got my computer reformatted and installed a new iTunes. I can't put anything on my iPod shuffle. The message "The iPod cannot be updated. An unkown error occured. (-36)" keeps on showing everytime I try to put songs on my iPod. I don't know what triggered this. Hope someone could shed some light. Thanks in advance!!
It is actually more simple than iTunes lets u believe.
If you just download an older version of iTunes, most likly the one u had before u updated ur computer, that should fix it and then you can update ur ipod and then get the newer version of iTunes.
Thats what i had to do when i got that exact same error just a few months ago.
If that dont work let me know.
Message was edited by: Killzone17 -
Using a Mac, OSX 10.6.8; My internet connection is working properly, I can reach all sites via browser, yet I get the following message in iTunes: "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."
I have the same issue with almost exactly the same environment...
iPhone4S (32GB) running iOS5.0
Windows 7 Enterprise
iTunes 10.5.2.11
iPhone has been set up to wirelessly sync when on charge yet I get this error when the iPhone is not even charging!
I work for a mobile network operator and although this isn't something we support anyway, we would usually stumble across something like this when customers call us for advice prior to contacting the manufacturer for support, yet this hasn't been a call driver so I'd imagine this is isolated... (either that or not many people have updated their device and set up the wireless sync lol)...
Hey Apple! Any ideas? :-) -
I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes. Apple support suggested I reset my password so I did that and still the problem is occuring. Itunes and the app store are working normally on my ipad and iphone. Does anyone know what the problem is. The new disk was installed in France coz I am on holiday there. could there be something I need to change in my settings? I need help urgently as I am trying to finish an assignment and need to be able to access and download from icloud.
Hi Stacey,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful with resolving the error you're seeing:
iTunes Store: "An unknown error occurred (-9808)"
http://support.apple.com/kb/TS2753
Best,
Jeremy -
Deployment Manager Error with Oracle Weblogic Server 10.3.1
I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AMYou are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing. -
Encore CS4 I received this error message: PrimoBurnerSDK -unkown error.
Under the Windows 7 Ultra OS, when I loaded Premiere Pro CS4, I received the following error message and thereafter when I tried to write a DVD with Encore CS4 I received this error message: PrimoBurnerSDK -unkown error.
I know the Burner is working properly because it is able to burn DVDs with Adobe Premiere Elements 9.
The Premiere Pro CS4package worked alright under the Window Vista OS.
What can I do to correct this problem?
Adobe Device Central CS4
Error:
Error 2.
Adobe Dynamiclink Support
Error:
Error 2.
Adobe Dynamiclink Support
Error:
Error 2.
Adobe Encore CS4
Error:
Error 2.
Adobe Encore CS4 Codecs
Error:
Error 2.
Adobe Encore CS4 LangPack (en_US)
Error:
Error 2.
Adobe Extension Manager CS4
Error:
Error 2.
Adobe Media Encoder CS4
Error:
Error 2.
Adobe Media Encoder CS4 Additional Exporter
Error:
Error 2.
Adobe Media Encoder CS4 Dolby
Error:
Error 2.
Adobe Media Encoder CS4 Exporter
Error:
Error 2.
Adobe OnLocation CS4
Error:
Error 2.
Adobe Output Module
Error:
Error 2.
Adobe Premiere Pro CS4
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_US)
Error:
Error 2.
Adobe Premiere Pro CS4 Third Party Content
Error:
Error 2.
LangPack (English) for DeviceCentral
Error:
Error 2.
Photoshop Camera Raw
Error:
Error 2.As a test, tell Encore to create an ISO on your hard drive, then use the free http://www.imgburn.com/index.php?act=download to write to disc
If that works, the problem is some other software that is "hijacking" your burner so Encore can't properly "talk" to it to burn -
The iTunes application could not be opened. An unkown error occurred (-50).
I was using iTunes with Windows 7 without problem. I recently updated to the latest version of iTunes (Version 9.2?) and now everytime I try to start up iTunes I get the message "The iTunes application could not be opened. An unkown error occurred (-50)." I tried everything in the Online help section of the Apple website for Windows 7, including "repair", deleteing iTunes and reinstalling, and nothing works. What is going on? Does anybody else have this problem?
Thanks. I actually looked at some of your previous advice on problems with Windows 7 and I disconnected my computer to wired and wireless networks, closed all programs, started CHKDSK and rebooted the computer and that solved the problem. iTunes is running perfectly so far. Unfortunately, I wasn't paying attention when CHKDSK finished and didn't get to see the report so can't let you know what it actually did, but it accomplished what all the the other solutions I tried did not (set up new user account, remove/replace preferences, remove/replace libraries. remove/reinstall iTunes, etc.).
Thanks again for your attention to this issue. -
Hi Friends,
I am trying to get a printout through FBZ5 for an ACH format (Payment method - T) for a new company code.
Facing the following error,
Select either a payment transfer medium or a DME
Message no. F0067
Diagnosis
Payment transfer media can be either printed on paper or output via data medium exchange. If you select both options, the system asks you to decide on just one.
Where can i select Payment transfer medium or DME?
for your information:
1.The payment method already defined in the Vendor master
2.The payment method not in the document line item
3. ACH Format is working fine with other co.code through Auto Payment run - F110
Please help me to figureout this issue.
Thanking you
KannaSAP has provided some of the DME structures for different countries. like GB_BACS for GB etc.
If your client is not part of those structure, probably you are required to create your own structure. It also depends on the bank of your client. They may want the file in a different format. Therefore, you need to first talk to the bank and get a sample file in which they need the format.
You can create the DME structure by using transaction code DMEE - Tree Type is PAYM.
You can create the DME structure as a flat file or XML file based on the requirement of your client (bank).
You can also copy the standard structure to Z structure and modify it according to your requirements.
Please also make sure that you have made settings in OBPM1, OBPM2, OBPM3 and OBPM4 (More importantly you should maintain the path where it needs to be downloaded)
Complete your FBZP settings - Importantly payment methods in country, select your DME structure.
Take help of basis consultant in order to create the directories. You can see the directories in AL11.
If there are no directory path maintained in OBPM4, then the file gets saved to temporary directory in AL11.
If you are using DME structure, then forget the classic payment medium.
1. First ask the bank for the format, file type etc. Ask bank for any document available.
2. The see for that country if SAP has provided any standard DME structure (Transaction Code DMEE - Tree Type PAYM)
3. If this is not sufficient, then copy the standard DME strcutre and modify it accordingly to your requirement.
4. Assign this DME structure in FBZP - Payment Methods in country. * Use payment medium workbench
5. Check with your basis whether any secured folders are created in AL11 (where the output file needs to get generated) - If not ask them to create.
6.Check your settings in OBPM1 / OBPM2 / OBPM3 / OBPM4 - (In OBPM4 make sure you have given the secured folder path and file name for your variant)
7. Run F110 - Check you have maintained your variant details properly for program RFFOAVIS_FPAYM
If you maintain all these steps correct, hope your DME file should get generated.
Regards,
Ravi
Maybe you are looking for
-
How to Change Value set Dynamically for a Parameter in Apps?
Hi All, I have a requirement where i need to change the value set dynamically for a given Parameter. This goes as, I have a Concurrent Program with 4 parameters. First Parameter is mandatory Business group.Second Parameter is Warehouse. Based up on t
-
I have Aperture 2 in CD and want to install it in new mac mini
Hi, I have Aperture 2 in a CD which I installed in my old "white" mac book about 6 yeas ago. I have now bought a new mac mini and I want to install Aperture again. Of course the new mac mini does not have a CD port. Question is: how can I download A
-
In my Mac Mail Version 4.5, I am not received email pdf attachement. It is shown in some html like form in message content. Please help
-
Problem installing REPORT VIEWER 2012 RUNTIME missing CLR Types
Hello, I have a win.forms application part of functionality of which is to show rdlc report. When I try to launch the application it says that ReportViewer assembly is missing, which was expected. When I downloaded and try to install viewer runtime f
-
<p>All -</p><p> </p><p>I am migrating outlines from 6.5(BSO) to 7.1.2 (ASO).When Imigrate I am unable to migrate shared members from BSO to ASO evenafter assigning the DIMENSION as Multiple Hierarchies Enabled.</p><p> </p><p>For Ex:</p><p> </p><p>DIM