I am facing big problem,

i am facing big problem, since i update my ipad4 from 6.0.1 to 6.2... after downloading and installing for 4 hours..... now i cant use my ipad anymore.. its stucked.....  ......

1. Try a reset, hold the Sleep and Home button down for about 10 second until you see the Apple logo.
2. If the reset doesn't work, try and force the iPad into Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Similar Messages

  • Big problems exporting a video in Media Encoder - detailed info

    Problems with exporting media through Adobe Media Encoder.
    Hi there.  I am really confused now, writing this, cause my Premiere CS4 has worked pretty good the year I have had it.
    So it has chosen a really bad timing to cause me problems.
    I am working on a big musicvideo production. The whole video is now finished, and the labels and the artists are waiting for the video. But I’m facing big problems now. And I have tried everything to solve this, without succeeding.
    ·         When I export the video, the Adobe Media Encoder sometimes waits and waits and waits and waits, and nothing happens.
    Screen shot:
    ·         When it does start, if goes to about 20%, and then it interrupts and give me "an unknown" error in the log-file:
    Screen shot:
    ·         Sometimes when I open the project , it gives me the following message when importing the media files.
    Screen shot:
    ·         The weird thing is that this only happens to the HD version. I have the same video in DV version, in a DV project, and it exports without any problem.
    So PLEASE help me here, what shall I do??? I MUST finish this video!

    And here is my log-file with all the attempts I've tried with different settings...
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD.prproj
    - Output File: C:\Users\Pawel\Desktop\TheThingCalledLove-MasterCut-HD.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:12:58
    2010-03-09 11:46:46 : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_3.prproj
    - Output File: C:\Users\Pawel\Desktop\TheThingCalledLove-MasterCut-HD-1280x720.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:12:55
    2010-03-09 14:09:21 : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
    - Output File: L:\TheThingCalledLove.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:07:57
    2010-03-09 14:24:41 : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
    - Output File: L:\TheThingCalledLove_1.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
    - Encoding Time: 00:07:38
    2010-03-09 14:38:40 : Encoding Failed
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
    - Output File: L:\TheThingCalledLove.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
    - Encoding Time: 00:06:21
    2010-03-09 16:50:42 : Encoding Failed
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_7.prproj
    - Output File: L:\Sequence 02.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5300,00 [kbps]
    - Encoding Time: 00:03:14
    2010-03-09 17:10:49 : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
    - Output File: L:\TheThingCalledLove_1.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
    - Encoding Time: 00:07:34
    2010-03-09 19:49:06 : Encoding Failed
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
    - Output File: L:\TheThingCalledLove.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
    - Encoding Time: 00:07:35
    2010-03-09 20:00:11 : Encoding Failed
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_12.prproj
    - Output File: L:\thu.wmv
    - Preset Used: HDTV 720p 25 High Quality
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:30:15
    2010-03-09 23:21:07 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest.prproj
    - Output File: L:\Sequence 02.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 01:35:20
    2010-03-10 14:18:32 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest_1.prproj
    - Output File: L:\Sequence 02.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:11:16
    2010-03-10 14:39:37 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest_2.prproj
    - Output File: L:\Sequence 03.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:24:50
    2010-03-10 14:53:11 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_14.prproj
    - Output File: C:\Users\Pawel\Desktop\Sequence 02.wmv
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:29:41
    2010-03-10 14:58:02 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    Could not write XMP data in output file.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_15.prproj
    - Output File: C:\Users\Pawel\Desktop\Sequence 02.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, :0, Avg 6736,00 [kbps]
    - Encoding Time: 00:13:57
    2010-03-10 17:37:50 : Encoding Failed
    Error compiling movie.
    Unknown error.
    Could not write XMP data in output file.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_16.prproj
    - Output File: C:\Users\Pawel\Desktop\Sequence.wmv
    - Preset Used: Custom
    - Video: 1280x720, 25 [fps]
    - Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
    - Bitrate: Compressed, VBR, 2 Pass, :0, Avg 6736,00 [kbps]
    - Encoding Time: 00:07:55
    2010-03-10 17:56:15 : Encoding Failed
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_18.prproj
    - Output File: C:\Users\Pawel\Desktop\Sequence 02.mpg
    - Preset Used: HDTV 720p 25 High Quality
    - Video: PAL, 1280x720, 25 [fps], Progressive, Quality 4,0
    - Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
    - Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 [Mbps]
    - Encoding Time: 00:16:03
    2010-03-11 08:52:52 : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_19.prproj
    - Output File: C:\Users\Pawel\Desktop\TTCL.mpg
    - Preset Used: HDTV 720p 25 High Quality
    - Video: PAL, 1280x720, 25 [fps], Progressive, Quality 4,0
    - Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
    - Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 [Mbps]
    - Encoding Time: 00:12:04
    2010-03-11 09:08:39 : Encoding Failed
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_17.prproj
    - Output File: C:\Users\Pawel\Desktop\Sequence.mp4
    - Preset Used: Custom
    - Video: PAL, 1920x1080, 25 [fps], Progressive
    - Audio: AAC, 320 [kbps], 48 kHz, Stereo
    - Bitrate: CBR, 32,00 [Mbps]
    - Encoding Time: 00:01:08
    2010-03-11 09:10:41 : Encoding Failed
    The Operation was interrupted by user

  • HT201441 hi , i'm facing a big problem here,my little brother has set his i pad to an e mail that he dose not remember anymore one day he tried to unlock the ipad but he entered a wrong password many times i had to restore but i cant cus i dont  know the

    hi , i'm facing a big problem here,my little brother has set his i pad to an e mail that he dose not remember anymore one day he tried to unlock the ipad but he entered a wrong password many times i had to restore but i cant cus i dont  know the apple ID

    If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625.

  • One Apple ID two phones big problem.

    Hi guys,
    Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
    I deleted user and created my user which was synced with iCloud and worked without any problem.
    Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
    Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
    Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
    If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
    So I have two doubts:
    - I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
    - another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
    I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
    PLEASE HELP, in my country we have awful support !

    Just left the Apple store with an official answer.  You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.

  • Dear Apple Good Morning Greetings from me. i use  IPHONE 5 in bangladesh. but now i facing a problem that is the signing problem the phone is not open even i cannot enter this phone is says Sign in to ICLOUD but i dont know the password what i do

    Apple please help me
    Good Morning
    Greetings from me.
    I used last 3 month  IPHONE 5 in bangladesh. but now i facing a problem that is the signing problem
    the phone is not open even i cannt enter this phone
    is says
    Sign in to ICLOUD
    Enter the Apple ID password for
    but i dont know the password. Please brother help me to use this phone. i brought this phone from some one 355pound. so i am in helpless.i am facing big trouble i dont have enough money for purchase another one. please help me...........................
    <E-mail Edited by Host>

    You need the previous owner to unlock it, unless they do you have a brick there is no other way .
    iPhone was probably stolen if you purchased on eBay, claim and get your money back
    See here
    http://support.apple.com/kb/HT5818
    for explanation of Activation lock
    APPLE will not help you

  • Little "big" problem with Reports 9i...

    Hi to all.
    I've a little "big" problem when i launching reports on the web. The reports services it's under SUN Solaris 5.9 and de 9iAS 9.0.2. Well when i launch the report the reports server give me this error: "REP-108: File '/tmp/pfj66590734.gif' not found.".
    The report have a chart, and the chart it's the problem, if i delete the graph(chart) the report run fine. In the Reports Server file config in the tmpDir, have specified this directory but, not find the gif.
    Can be a problem of the chart with the reports engine?
    I don't know.
    Anybody have which that's the problem.
    Thanx in advance. Oscar.

    I was facing the same problem when running a report with embedded chart graphics, and every time we tried running it we got an error message like the one below, where the gif file name changed every time:
    REP-108: File 'd:\ora9ias\reports\temp\pfj30143486.gif' not found
    Our solution was:
    After a lot of research and troubleshooting we found out that if we compiled the report in a different machine (the developers') and deployed to the server it worked fine, the problem was the settings (registry and path variables) in the machine that was compiling the report (Our software release machines). I can't say exactly what were the settings changes right now, but try under someone else's machine, its the configuration of reports builder.
    Hope this helps.

  • Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

    hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
    and this is an pic for the problem

    There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

    I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

    try general>settings>reset>reset all settings and start up as an new phone.

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

    Hi Friends,
    I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
    Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
    For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
    But i want how to add custom tab in which item details were to be attached.
    i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
    And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
    can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
    Thanks a lot in advance.
    Thanks
    Ravi.
    can any one give the solution regarding to the above one.
    Edited by: ravikanth on Jul 23, 2008 8:13 AM

    Hello Priyanka,
    I have the same problem by using Service Ticket in SAP CRM 5.0.
    Did you already solved this issue? If so, can you please provide the solution!?
    How can I activate and check the transfer log?
    Thanks and regards
    Alex

  • I am facing a problem in a crystal report which is based on Infoset query

    Hi All,
    I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
    There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
    Best Regards,
    Srinivas

    Hi,
    I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
    Best Practices v3.31 - SAP InfoSet Query connection
    Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
    Ingo

  • I am facing a problem in a crystal report which is based on Infoset query.i

    Hi All,
    I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
    There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1

    Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly

  • I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

    while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
    I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
    we are not going through SD configuration and I mentioned evrything in Tcode J1ID

    Chek SAP Note 951938 is applicable to you
    Regards
    Sanil Bhandari

  • Dear Mr./Mrs.,  I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I

    Dear Mr./Mrs.,
    I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
    Yours sincerely,
                             Hesham.

    Welcome to the user to User Technical Support Forum provided by Apple.
    For your issue...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
         Or Email Here  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • Why does the screen say, "Adobe Reader is blocked for this website."

    When I try to continue on to the site and trust the site, I recieve a different message stating, "Before viewing PDF documents, in this browser, you must launch Adobe Reader and accept the end user agreement, then Quit and relaunch the browser."  I h

  • Issues with iMac on local network

    My iMac has started to disappear from my local network and I cannot find the source of the problem. The iMac remains connected to the internet and browsing works fine. Everything appears to be operating as normal from the iMac. Unfortunately Any apps

  • Reverse engineering for existing database

    Hi, I have two different databases, one with my application (i.e. DB1), and the other with the designer installation (i.e.DB2). I want to get the Reverse Engineering of my app in DB1, and I know these steps: - Design Editor> DB Admin tab> Generate> C

  • [Help]: Exit stacked sequence in advance

    I am using a stacked sequence structure. Within one sequence, if I find a condition is met, I want exit the whole sequence structure without executing following sequences. Is there a simple way to do this?  Thanks a lot. Dejun

  • Programmalically disconect a user from Remote Panel Web Server

    If a Web client is accessing to my Web Server for a long time, how can I Programmatically disconnet it?