I am facing problem in starting ShellHWDetection service Error code 1075,please help

Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
It provides notifications for AutoPlay hardware events.
System error code 1075 means "The dependency service does not exist or has been marked for deletion."
Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
Make sure the three services are set to running "automatic" in Services.
If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
Yolanda Zhu
TechNet Community Support

Similar Messages

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

I am facing problem for mix font size in RDF reports .Please help me ?

Hi all,
I am using oracle reports developer 11g v 1.2.3 .
My problem is regarding PDF output from RDF reports . I have reports that contain Text ..When i generate PDF output my text area shows different font size for BOLD text.
I have uploaded image .Below is link for it .
(portion Highlighted in Yellow is bold text and it changes its font size.
View image: 1 14 2014 2 52 53 PM
Please help me to overcome this problem.
Thanks,
HPSQLDEVELOPER

Did you generate the report in Builder or in Reports server?
Please provide the OS details and how you are running the report.

WINDOWS UPDATE ERROR, SERVICE ERROR, ETC. PLEASE HELP!!

Problems Found:
Some security settings are missing or have been changed.
Service registration is missing or corrupt
Windows Update Error 0x80070057(2014-07-16-T-03_16_19P)
Problems installing recent updates
I have literally tried everything I can and its just getting even more upsetting :(
Im running an ASUS w/ Windows 8.1 and cannot find the solution for the following....
It seems to me, like I have never gotten any updates that I need... only download it gives me is the windows defender update. I've tried resetting the windows update did a health scan no bad sectors.
PLEASE HELP!

Problems Found:
Some security settings are missing or have been changed.
Service registration is missing or corrupt
Windows Update Error 0x80070057(2014-07-16-T-03_16_19P)
Problems installing recent updates
I have literally tried everything I can and its just getting even more upsetting :(
Im running an ASUS w/ Windows 8.1 and cannot find the solution for the following....
It seems to me, like I have never gotten any updates that I need... only download it gives me is the windows defender update. I've tried resetting the windows update did a health scan no bad sectors.
PLEASE HELP!

Trying to start LR 5 error preview cache please help

I need help. I am trying to open my LR5 and getting error that issue with preview cache. I click okay and it shuts down. what do i need to do to open it up so i can continue work?

There must be dozens of threads in this forum that provide the answer. A simple search will find them.

Problem in starting Integration service with DAC 11g

Hi friends,
Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
Failure connecting to BIA_IS!
Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
Also checked with the dac_env file which has the below contents
REM -----------------------------------------------------
REM
REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
REM PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
REM
REM INFORMATICA_SERVER_LOCATION denotes installation of
REM Informatica components. Example:
REM C:\Informatica\PowerCenter9.1
REM
REM DOMAINS.INFA_FILE_LOCATION denotes the location
REM (including name) of domains.infa file
REM
REM Please make sure to set correct values for variables
REM mentioned above
REM
REM -----------------------------------------------------
set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
set INFA_CMD_STYLE=8
set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
What could be the problem and where to check with the logfile related to the integration service failure in DAC.
Thanks in advance.
Regards,
Saro

Hi guys,
The issue is sorted out. The below are the two precautions to be considered.
*) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
*) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
Regards,
Saro

Problem in starting foundation services.

Hi All,
My foundation services were working fine but now it stopped suddenly. when i am trying to restart, it gives me the following error :
"The Hyperion Foundation Services - Managed Server service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs”.
Please help.

Hi John,
i am getting the following error in HyS9FoundationServices-syserr.log
weblogic.servlet.jsp.JspFileNotFoundException: Requested JSP source file '/launch.jsp' no longer exists
     at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:204)
     at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:137)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:232)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.oracle.workspace.security.AuthenticateRedirectFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.bpm.LocalizationServletFilter.doFilter(LocalizationServletFilter.java:69)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.i18n.filter.Utf8Filter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.bpm.config.ConfigFilter.doFilter(ConfigFilter.java:89)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.css.wls.CssJpsFilter.doFilter(CssJpsFilter.java:32)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.bpm.logon.SessionBlockFilter.doFilter(SessionBlockFilter.java:77)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.servlet.jsp.JspFileNotFoundException: Requested JSP source file '/index.jsp' no longer exists
     at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:204)
     at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:137)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:232)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.oracle.workspace.security.AuthenticateRedirectFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.bpm.LocalizationServletFilter.doFilter(LocalizationServletFilter.java:69)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.i18n.filter.Utf8Filter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.bpm.config.ConfigFilter.doFilter(ConfigFilter.java:89)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.css.wls.CssJpsFilter.doFilter(CssJpsFilter.java:32)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.hyperion.bpm.logon.SessionBlockFilter.doFilter(SessionBlockFilter.java:73)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Kindly advice.

Tip regarding the "systemd[1]: Failed to start Journal Service" error

Just a tip regarding the well-known
systemd[1]: Failed to start Journal Service
error (which I ran into last weekend) to maybe save one or two among you a couple of hours of your time:
The error is described here https://bbs.archlinux.org/viewtopic.php?id=151012 as well as in several other threads in other language boards / in other forums etc. It is usually (as in the linked thread) 'solved' by reinstalling the system - good old Windows magic, also useful when dealing with systemd.
The Problem with this error is that you do not get into your system. Instead, systemd will print you the mentioned "Failed to start Journal Service" error message a couple of million times. There are also no logs that you could retrieve (when booting from a livesystem) and that would give you any helpful hints, since journal is systemd's logging service, old-style system logs are not kept, and the dmesg log doesn't survive the reboot with default settings.
As pointed out in the above mentioned thread, you will see a few more instructive error messages when adding 'emergency' to the kernel line in the bootloader config.
Now there may be plenty of reasons why the systemd journal service might not work. The most common and most annoying, however, appears to be this one:
In this case you will see that the problem actually lies in
systemd[1]: Cannot open /etc/machine-id: No such file or directory
Now, 'man machine-id' reveals that "the /etc/machine-id file contains the unique machine id of the local system that is set during installation. (...) The machine ID is usually generated from a random source (...)". It is obviously perfectly justified to refuse to boot the system because an absolutely insignificant random number is missing. As far as systemd is concerned anyway.
Usually, it seems, the /etc/machine-id is set by /usr/bin/systemd-machine-id-setup during installation or system upgrade. It is not documented anywhere that this is a rather important step and that you should better check if this was or was not actually done before rebooting. Obviously (but for no apparent reasons) systemd fails to run this (or to run this successfully) sometimes.
Also to be recommended: Always retain (back up) your old kernel and initramfs and edit your bootloader config appropriately to be able to boot with your old kernel again ... just to have one or two options left to get back into the system in case of running into an unpleasant surprise from the side of systemd or other packages.
The solution is, obviously, to create this file /etc/machine-id ... You probably want to do that from a livesystem (if you want to try it from the emergency shell, you would need to remount / (i.e. root) as rw and hope that systemd will not punish you for that) by just running the program that was designed for creating this file manually: /usr/bin/systemd-machine-id-setup
http://permalink.gmane.org/gmane.comp.s … devel/7528 states that it might also work with merely creating the file 'touch /etc/machine-id'. Though I didn't try that since I had enough fun with systemd for one week and didn't want to break my system again just to see if that works.

Jristz wrote:
ackalker wrote:Sorry for necrobumping this.
Generating the machine-id in a consistent way is very important when working with KVM and containers, where the machine-id can be set for the VM or container. See `man systemd-machine-id-setup`.
Again, _don't_ just put some random UUID in there, especially not in the systemd package install script, this makes provisioning Arch Linux containers a PITA.
If you thing that the way that arch is handlynbg the machine-id is wrong or can be improved, then file a bug.
He already did.
Jristz wrote:Anyway, I thing if reinstalling systemd package or if systemd have a command to reinitialize the machine-id file.
Like so many of your posts, I had to read this a half dozen times before it made any sense. I think you're hinting at the utility that ackalker already pointed out in the post you're replying to. And, if you read the install scriptlet, you wouldn't need to think about whether or not reinstalling would be an option. You would know that it isn't.

ISQL*Plus Failed ta start the service, Error:0

Hello there,
I setup Oracle 10g for window 2003. When to Configuration Assistans then show table error : Failed ta start the service, Error:0, The operation completed successfully.
In the Event Viewer i can see the following:
The description for Event ID ( 15 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1460, This operation returned because the timeout period expired.
, 4.
I set the Path variable C:\oracle\SOL\102\bin and the ORACLE_HOME to:
C:\oracle\SOL\102
But it did not solve the problem.
I installed only Windows 2003 Enterprise Server with Service Pack 2
when i use this command isqlplusctl start at command prompt the message appears:
Failed ta start the service, Error:0, The operation completed successfully.
please can you help here?

I forgot.
I installed JAVA SDK 1.4.2_09 too
But when i uninstall it the same error appears...
But i think Oracle do run with 1.4.2_09 or not?

HT1267 I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines :(

I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines

What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

In order to start cable service for this device, please contact your cable provider

when i try to watch a program on the xfinity part of tivo i get this message.In order to start cable service for this device, please contact your cable provider . what is wrong.

stormey wrote:
when i try to watch a program on the xfinity part of tivo i get this message.
In order to start cable service for this device, please contact your cable provider . what is wrong.
Apologies for the issue that you described above. I have escalated your issue to the right teams so that we can get On Demand working for you on your TiVo. That team will review your account and contact you directly. Thanks again for your patience.

My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

79 Service error code

I keep getting this service error code 79 - It says to reboot which I have done numerous times. Nothing works.

I have same problem - this doesn't help. Did you did something that worked?

I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down. Please Help me!

Hello!
I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
Please Help me!
MacBook Air (11-inch Mid 2009)

Welcome to Apple Discussions
You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
Also remove any attached peripherals.
Reboot in Repair mode (command-R at start) and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
You must have more than enough (not just enough) empty (free) disk space for the update.

HT1725 When I try downloading apps on my I pad it says additional information required. It then asks me to answer these questions that I have selected as my security questions. The only problem is I have forgot my answers, APPLE PLEASE HELP ME!!! Thank yo

When I try downloading apps from the app store it doesn't allow me until I have entered the security questions, the only problem is I have forgotten my answers. Please help me to find out how I can retrieve the answers back, thank you

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

I am facing problem in starting ShellHWDetection service Error code 1075,please help

Similar Messages

Maybe you are looking for