I am facing problem in video recording from camera

Ios7 updated few days back after this I am facing problem with my video recording in camera? Now only one option is showing in my camera - photo which is giving me option to click picture, square. HDR on/off.
The video is not working? Kindly help me on this.
Thanks,
Kalyani
Bangalore

I'm facing the same problem also
Can only use taking picture, no video recording since update it to iso7

Similar Messages

Problems importing videos recorded from my iPhone 3GS to iPhoto

I am having problems importing any videos recorded from my iPhone 3GS onto iPhoto. iPhoto keep giving me the following error:
"Error downloading Image. iPhoto cannot import your photos because there was a problem downloading an image."
If anyone else is having the same problem, please advise on how to fix.
Thanks,

I am having the same problem...
and Image Capture ( didn't know we would normally be able to use it, but you can) also give an error
"Import Error"
Now I have used "ITimelapse pro" to transfer some timelapse movies (about 3 that are about 30 to 60 seconds long) that I made to the phone's photo library.. and I has a very long video that I mistakenly made - (15 minutes long or so) and I "trimmed" it to be a few minutes long. -- and used "JotNot" to send a photo to the photo library... otherwise I have only some regular photos (about 40 ) and about 2 regular videos in the library.
so any suggestions... ( I am emailing all that I can to myself ... maybe ridding everything will help)

Presenter video recording from PowerPoint has stopped working

My Adobe Presenter 9.02 Build 173 has suddenly developed a problem where recording video from within PowerPoint has stopped working. I have Office 2013 32-bit and Windows 8.1 64 bit. I believe that Presenter installed itself automatically in the installation process as a 64-bit application.
When I press the 'record now' icon on the Presenter toolbar, PowerPoint opens the current displayed in Slide Show view and I get the following error message:-
"Adobe presenter has encountered unexpected problem while working with this presentation......" etc.
This video recording feature from within PowerPoint has worked just fine on my system with the identical setup as mentioned in my opening paragraph but it's suddenly stopped working for some reason? I checked and do have the latest graphics driver.
The stand - alone video creator tool records video outside of PowerPoint just fine but as stated, I can’t execute recording from the ‘record’ icon on the Presenter menu in PowerPoint.
I tried the following without success:-
I created a new PowerPoint file and tried to repeat the recording process
I ran PowerPoint as Administrator and ran the file ‘Adobe-Pr-VC.exe’ (in C:\Program Files\Adobe) as Administrator
I uninstalled and re-installed Presenter
I turned off my AV software and firewall
I created a new Windows Administrator account and tried video recording within PowerPoint
Anyone have any ideas on what else I could try?
Peter

Solved! In the end, the solution was simple!
I went to the PowerPoint 2013 ribbon and clicked on 'Slide Show' and unchecked 'Use Presenter View' and video recording from within PowerPoint immediately started working fine. Previously, the 'Use Presenter View' box had a check mark in it. When you click on the record video button in Presenter, PowerPoint goes into slide show view and clearly Presenter doesn't like PowerPoint opening the Slide Show view in Presenter view.
I picked up on this from another PC I have with PowerPoint 2013 and Adobe Presenter 9. The video recording feature worked every time on that PC and I noticed that the only difference was that the newer PC had a check mark next to 'Use Presenter View' where as the older PC setup didn't.
So everything is working well now!

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Performance problem with selecting records from BSEG and KONV

Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
Prashant

Hi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient.

Recovery of deleted video clip from camera roll

How can I recover a deleted video clip from camera roll?

Is the deleted clip contained in a backup that you have? If so, restore from that backup. Please note that all content created on the phone since the backup was done will be lost

Facing problem in loading masterdata from PSA for 0cust_sales

Hi,
I am facing problem while loading Masterdata for 0cust_sales in PSA. data is coming from KNVV table but there is no duplicate record in the KNVV Table but while loading data to SAP BI, Its showing error message in PSA for few customers - duplicate records being created.
Kindly please help me with this issue
Regards,
Swapnil

Switch on Indicator: Handling Duplicate Data Records
Use
If this indicator is set, duplicate data records (that is, records with the same key) are handled during an update in the order in which they occur in a data package.
For time-independent attributes of a characteristic, the last data record with the corresponding key within a data package defines the valid attribute value for the update for a given data record key.
For time-dependent attributes, the validity ranges of the data record values are calculated according to their order (see example).
If the indicator is not set and error handling is deactivated, the request terminates once data records with the same key are detected. If error handling is activated, data records that have the same key are written to the error stack of the DTP.
Note:
If during your data quality measures you want to make sure that the data packages delivered by the DTP are not modified by the master data update, you must not set this indicator.

Autosync - Sync Detection Problem with Video/Audio from different sources

Hi,
i've got the following problem:
I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
Is this a bug ?
Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
Thanks for help !

I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
Thanks again for your help.

How can I share HD video recorded from my iPhone 4s

How can I send a video recorded on my iPhone 4s to someone so they can view it in HD? I tried sending the video via mms, but I understand the video will be compressed and the viewer will not see the recording in HD

Hey Ravengirlaa,
Great question! The answer is going to depend on how the photos were originally organized:
A) The albums were synced to your iPhone from iTunes
B) The albums were manually created on your iPhone from photos in the Camera Roll
The following excerpt would apply for situation B:
excerpt from page 71 of the iPhone User Guide - http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
If the photos were synced from your computer, please refer to this article (section "To delete photos and videos from your device"):
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
Thanks,
Matt M.

Video record from PC

I have trouble recording from my MSI Ti-4400 card to my VCR (from W2k).
I've connected from my graphic card to the VCR with RCA connectors to a SCART adapter to the VCR. The picture is perfect on the TV but when recording on a VHS tape the playback from the tape flickers.
I've tried different tapes and sources and no problem there. It must have to do something with the settings on the graphic card?
Thanks for help.

Found it. The Output device in the graphic card settings was set as NTSC-M as default. Works fine now.
Strange that it had a perfect picture on the TV but not on the VCR recording since the signal was passed through the VCR to the TV (maybe I have an old VCR )
Thanks anyway!

Problem with video recording in wtk2.2

Hi,
I was trying to create a small utility for video recording using MMAPI.but the problem is that its is not working in the wtk2.2 emulator even after i include the mmapi package to the environment.
Video player created by the following way is not working
videoPlayer = Manager.createPlayer("capture://video");//
but Audio recording is working properly
audioPlayer = Manager.createPlayer("capture://audio");//
any help?
Mandrake

At last video recording using the combination of JSR 135+JSR 75 worked fine for me in Nokia N70 as well as Siemens S75!!!!!
Cheers
Prashanth

Problem When deleting record from database

Hi ,
I have a question. Firstly I'm using VB
I have a problem about deleting any record from access database , That's the code I'm use it for add new item and it's work but it's not work when I tried to edit any rows " it's not want to Save" but work for add new Item.
Try
Me.Validate()
Me.CustomerBindingSource.EndEdit()
Me.CustomerTableAdapter.Update(Me.KonoDataSet.Customer)
MsgBox("Update Successful")
Catch ex As Exception
MsgBox("Update Failed")
End Try
And That's my code for Deleting any record from database But it's not work and that's a problem.
CustomerBindingSource.RemoveCurrent()
CustomerBindingSource.EndEdit()
Me.CustomerTableAdapter.Update(Me.KonoDataSet.Customer)
Can anybody help me about that issue ?

Hi kono20006000,
Your issue seems really strange. I would recommend you make a troubleshooting.
1.Made sure your code works with the single copy of the database. You could check if it scans hard drive for the database file name and check if it modifies dates on found files. You could check if you operate with the same database.
2. Use the application update the record at the form_load event to see if it would work correctly.
3.Check the table in update statement and the table in add statement.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Problem importing video clips from Panasonic SDR-S10

Hi, can anyone help? In iMovie I try to import my video clips from my Panasonic Camcorder SDR-S10 and it shows clips there, but when you click on them the clip icon disappears. Try to import and it doesn't import anything? Any ideas.
Anyone know a workaround for importing clips from this camera I get a lot of problems with a Mac when using this one.
Thanks
Hayley

I have the same camcorder and have used Visual Hub to convert the .mod clips to .dv files which work just fine with iMovie. You can try out Visual Hub for clips less than 2 minutes in length in the trial mode. I think it costs about $20. Also, I've heard you can buy an mpeg2 plug in for Quicktime Pro that will let you use those files. I think that is also about $20.
Also, search the apple discussions for ".mod" and you'll find a lot of other similar questions to the one you asked.
Hope this helps.

Problems importing HD recording from Sony HD-HCR3

Apologies but I am new to this!
I just bought the Sony HCR3 - when I try to import (via Firewire) HD movies, the picture is very jumpy, single clips are getting broken up and the audio is distorted (voice sounds an octave lower) even though the playback on the camcorder is fine. I don't have any problems when I record and import in DV format.
I have upgraded to iMovie 6, but have yet to upgrade from 10.3.9 (which means that some features of iMovie HD don't work). Is this the reason for my problem?
Thanks in advance for any advice.
iMac G5 Mac OS X (10.3.9)

Well, I have a similiar problem with the Sony HDR-HC1E.
The imported movie ist too slow, so it sounds an octave lower. This problem occures on my powerbook g4 and on my powermac g5. There are no problems with imovie 5.
Nobody could tell me why this problem occures....
You should go bac to imovie 5. iDVD 6 has also some problems.
Sincerely....

I am facing problem in video recording from camera

Similar Messages

Maybe you are looking for