I am facing problems with my adobe illustrator(64-bit) version which I am using on my windows 7 (64-bit) version. When I try to open the application it gives me the following error:
The procedure entry point not found. I have already done a bit of troubleshooting by uninstalling it and re-installing it back again by disabling the anti-virus and windows firewall. It works fine for sometime but after sometime when I log back into my computer it starts giving me the same error. The 32-bit version is working fine but the 64-bit version is giving me this error message and does not start. I have also worked on the system files that could be corrupt but still no progress.
Try downloading from here: Download Photoshop Elements products | 13, 12, 11, 10
FYI this is the Photoshop section, Elements questions should be asked here: Photoshop Elements
Benjamin
Similar Messages
-
when i try to open docs in mail box i get an error msg : "there is a problem with adobe acrobat/reader. If it is running please exit and try again (1014:1014)"
I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again
-
Problem with reinstalling Adobe Illustrator CS4 on new pc
Using a new PC with Windows 7. Upon reinstalling and inputting serial number, prompt appears..."We looked inthe default locations for qualifying products installed on this machine but none found. You may verify upgrade eligibility now by completing fields to the right." Choices given do not include Adobe Illustrator CS4. What next? I appreciate the help.
I have a disc in the same box that says CS3. I thought that was an older version. Should I try installing that disc first? It seems to have a different serial number. Thanks so much for your help. I appreciate it.
Date: Mon, 3 Sep 2012 15:25:41 -0600
From: [email protected]
To: [email protected]
Subject: problem with reinstalling Adobe Illustrator CS4 on new pc
Re: problem with reinstalling Adobe Illustrator CS4 on new pc
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
It is looking for the qualifying product which entitles you to use the Illustrator CS4 update. Did you have an older version of Illustrator which upgraded from?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670448#4670448
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670448#4670448. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?
Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on. -
Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?Camera Raw plug-in | Supported cameras
-
When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?
Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?
Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden -
using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
When I try to open a pdf I get a acrobat reader error, It states ( There was an error opening this document. Could not repair file.
There is not modern program called Acrobat Reader. There is an Adobe Reader program, there is an Adobe Acrobat (Pro or Std) program. Which program are you using? Under which OS?
Please repost your question with your answer to either the Adobe Reader forum: http://forums.adobe.com/community/adobe_reader_forums or or the Acrobat Installation forum: http://forums.adobe.com/community/acrobat/installation_and_update_installation -
I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.
There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)
-
I recently downloaded the latest version of Adobe Reader for my MacBook Air and now when I try to open a new pdf I get the Adobe logo and text in Japanese and nothing else. The pdf doesn't open. Any suggestions? I never had this problem until my cache was cleared and I had to re-install Adobe Reader. Any help would be appreciated.
Just to say I am having exactly the same issue on my MacBook Air. I can't remember what I did but after this happened a few times, and once I had clicked on the Japanese pop up, I managed to do something that now means I get the pop up in English, saying 'Adobe Reader blocked for this website'. When I click on it it asks me to trust the content and then I get a bar with the text in Japanese. Eventually the pdf does open. However it's very irritating that I have to trust every pdf individually which I never had to do before the latest upgrade, and I don't understand why I get messages in Japanese. I will be interested to see whatever answers other more technical people may provide!
-
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
Keep getting error code 10657 when I try to open certain applications?
Hi! I keep getting an error code when I try to open certain applications, such as iTunes or Adobe PhotoShop... it reads error 10657?
See this archived discussion: https://discussions.apple.com/message/7005768?messageID=7005768
Bob -
Hello,
I am trying to add a book to ADE. I have previously read it on an Android device using an app called Aldiko. Now when I try to open it up on my account I am getting the message "the vendor account you are entering is not associated with the item you are trying to open". Please helpThis is the Adobe Reader forum; please ask in the Digital Editions forum.
Maybe you are looking for
-
I have formatted my SSIS Package beautifully, if I do say so myself, so that all my tasks are visible at 50% zoom. However, when I close my project and then re-open it in Visual Studio, it defaults back to 100%...YUK! I did find this post which didn'
-
How to use XSJS file path in Controller.js file
Hi Experts, Regarding How to use XSJS file path in Controller.js file. I have gone through the SAP HANA Extended Application Services (Thomas Jung http://scn.sap.com/community/developer-center/hana/blog/2012/11/29/sap-hana-extended-application-servic
-
How to cancel subcontracting challan or 57F4?
Dear All, My scenerrio is like we create subcontracting PO and Issue the all component with movement type 541 and reference of subcontract order. then create subcontract challan or 57F4 challan. then user want to cancel the challan or reverse the cha
-
Settings in /etc/sysctl.conf overwritten [SOLVED]
I added a new line to /etc/sysctl.conf setting the vm.dirty_ratio to 3 (line is simply `vm.dirty_ratio = 3`). I can invoke it by running `sysctl -p` so I know the syntax is correct. This setting is however not loaded upon a reboot. The systemd-sys
-
IDOC's for Mass Opportunity Load with Product Categories Maintained
Hi I am looking for an IDOC that I can use to do a mass upload of opportunities with products maintained in opportunities. Please help on this. Regards Tarang