I am fairly new to ID and I am trying to export a brochure to pdf
I get this mesage problem with background task ( 1 failure) I then click on it and I get failed to export to pdf
( i already know that) how do I find out what the problem is
i have done a preflight and it says no problems
I would ask your question in the InDesign forum http://forums.adobe.com/community/indesign. They should be able to help you.
Similar Messages
-
I have a fairly new iPod touch and the touch screen has suddenly stopped working..... Like the bottom row of apps has stopped working and certain buttons on the keypad are not working at all what so ever I have taken it to the apple store once before they told me to update it I did so and it didn't get better I have also restored it multiple times still nothing I really would like a working I pod please help!!!
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards
Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.
-
I just purchased a new iphone 4S and I'm trying to loan some music from itunes. I keep getting a message that says not enough space on my phone. I checked my phone and I have 5.1G available. I deselected all the songs on my itunes to try and get it to sync and I keep getting the same message. Any tips?
Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
- If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
- Select the iOS device from the iTunes window and click the Summary tab.
- Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
- Click Apply to sync the changes to the device.
- Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M. -
I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?
No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.
-
Hi, I just bought a new Macbook pro and i am trying to transfer my photos from my iPhone to my macbook. I set up the account on iTunes but it won't transfer my photos. How do i do this?
Hi, I just bought a new Macbook pro and i am trying to transfer my photos from my iPhone to my macbook. I set up the account on iTunes but it won't transfer my photos. How do i do this?
-
I'm a new MAC user and I'm trying to transfer my iTunes music files to my Mac, however when I attach the external drive that contains the music files, the music files aren't visible on the MAC (but they are visible on my old PC). How do I get my music transferred? I have already exported the purchased music from the iTunes library, but I have thousands of songs from my private CD collection that I had previously loaded through iTunes.
Paragon Software has the most reliable NTFS driver for Mac
tips on importing and organizing, transferring from Windows etc
http://www.apple.com/support/itunes
http://www.ilounge.com -
I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!
guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away. -
I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't! I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected. HELP!
Ask the Verizon store to exchange your iPhone for a different iPhone 4.
UPDATE - Sure, try ckuan's solution first. Then use mine if that fails.
Message was edited by: sberman -
Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help
Oh thank you very much, i was worried after a whole day's hard work but most important that i had lost my photos, i don't understan the photo,shared and albums? I have a lot of photos in my albums that it didn't let me delete, yet i could delete a lot of others, could you explain this to me please
-
I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?
You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again. -
I am new to DPS and have been trying unsuccessfully to get it installed and working. Please help!
I am new to DPS and have been trying unsuccessfully to get it installed and working.
I have updated the entire Creative Cloud repeatedly, even used the cleaner tool to remove older files, preferences and OOBE file and still cannot use update from help menu in IndesignCC to get DPS tools. It is greyed out.
No options available in the folio builder either. And if i close the folio builder the only way it comes back is to reset the publishing profile.
Please help as learning this software has become a priority in my industry.Hi Bob
I have downloaded the tools and get an admin error trying to install it. ( See attached).
Apologies for the late response. This site was very slow yesterday.
Can we attempt to resolve this issue via email instead? -
I just updated my Mac to the new op system and when I tried to open my Ai it gave me this message, "To open "Adove Illustrator CS5.1 you need to install the legacy java SE 6 runtime." I updated my Java to 8 and it still won't open. I tried to update my Ai to 11...it won't update.
Steven,
The right way/order is to update the OP, then reinstall the applications.
For the Java SE,
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case. -
Hello, I am new to java and I am trying to something cool
Hello I am new to Java and I am trying to do something cool. I have written some code and it compiles nicely. Basically what I am trying to do is use ActionListeners with JTextArea to change the size of a rectangle thing.
Here is my code. The problem is that when I push the submit button nothing happens. Any help you could give would be greatly appreciated.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
class SecondGate extends JFrame implements ActionListener {
float sxd = 190f;
float dps = 190f;
JTextArea Long = new JTextArea(1,3);
JTextArea Short = new JTextArea(1,3);
JLabel one = new JLabel("width");
JLabel two = new JLabel ("Height");
JButton Submit = new JButton("Submit");
public SecondGate() {
super("Draw a Square");
setSize(500, 500);
Submit.addActionListener(this);
setLayout(new BorderLayout());
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
String Width = Float.toString(sxd);
String Height = Float.toString(dps);
Rect sf = new Rect(Width, Height);
JPanel pane = new JPanel();
pane.add(one);
pane.add(Long);
pane.add(two);
pane.add(Short);
pane.add(Submit);
add(pane, BorderLayout.EAST);
add(sf,BorderLayout.CENTER);
setVisible(true);
public void actionPerformed(ActionEvent evt) {
Object source = evt.getSource();
if (source == Submit) {
sxd = Float.parseFloat(Long.getText());
dps = Float.parseFloat(Short.getText());
repaint();
public static void main(String[] arguments) {
SecondGate frame = new SecondGate();
class Rect extends JPanel {
String Width;
String Height;
public Rect(String Width, String Height) {
super();
this.Width = Width;
this.Height = Height;
public void paintComponent(Graphics comp) {
super.paintComponent(comp);
Graphics2D comp2D = (Graphics2D)comp;
comp2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
BasicStroke pen = new BasicStroke(5F, BasicStroke.CAP_BUTT, BasicStroke.JOIN_ROUND);
comp2D.setStroke(pen);
comp2D.setColor(Color.blue);
BasicStroke pen2 = new BasicStroke();
comp2D.setStroke(pen2);
Ellipse2D.Float e1 = new Ellipse2D.Float(235, 140, Float.valueOf(Width), Float.valueOf(Height));
comp2D.fill(e1);
GeneralPath fl = new GeneralPath();
fl.moveTo(100F, 90F);
fl.lineTo((Float.valueOf(Width) + 100F),90F);
fl.lineTo((Float.valueOf(Width) + 100F),(Float.valueOf(Height) + 90F));
fl.lineTo(100F,(Float.valueOf(Height) + 90F));
fl.closePath();
comp2D.fill(fl);
}I got it to work. You were right about the method and references. Thank you
Here is the working code for anyone who is interested in how to do this.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
class SecondGate extends JFrame implements ActionListener {
float sxd = 190f;
float dps = 190f;
JTextArea Long = new JTextArea(1,3);
JTextArea Short = new JTextArea(1,3);
JLabel one = new JLabel("width");
JLabel two = new JLabel ("Height");
JButton Submit = new JButton("Submit");
String Width = Float.toString(sxd);
String Height = Float.toString(dps);
Rect sf = new Rect(Width, Height);
public SecondGate() {
super("Draw a Square");
setSize(500, 500);
Submit.addActionListener(this);
setLayout(new BorderLayout());
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel pane = new JPanel();
pane.add(one);
pane.add(Long);
pane.add(two);
pane.add(Short);
pane.add(Submit);
add(pane, BorderLayout.EAST);
add(sf,BorderLayout.CENTER);
setVisible(true);
public void actionPerformed(ActionEvent evt) {
Object source = evt.getSource();
if (source == Submit) {
String Width = Long.getText();
String Height = Short.getText();
sf.Width(Width);
sf.Height(Height);
repaint();
public static void main(String[] arguments) {
SecondGate frame = new SecondGate();
class Rect extends JPanel {
String Width;
String Height;
public Rect(String Width, String Height) {
super();
this.Width = Width;
this.Height = Height;
String Width (String Width){
this.Width = Width;
return this.Width;
String Height (String Height) {
this.Height = Height;
return Height;
public void paintComponent(Graphics comp) {
super.paintComponent(comp);
Graphics2D comp2D = (Graphics2D)comp;
comp2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
BasicStroke pen = new BasicStroke(5F, BasicStroke.CAP_BUTT, BasicStroke.JOIN_ROUND);
comp2D.setStroke(pen);
comp2D.setColor(Color.blue);
BasicStroke pen2 = new BasicStroke();
comp2D.setStroke(pen2);
Ellipse2D.Float e1 = new Ellipse2D.Float(235, 140, Float.valueOf(Width), Float.valueOf(Height));
comp2D.fill(e1);
GeneralPath fl = new GeneralPath();
fl.moveTo(100F, 90F);
fl.lineTo((Float.valueOf(Width) + 100F),90F);
fl.lineTo((Float.valueOf(Width) + 100F),(Float.valueOf(Height) + 90F));
fl.lineTo(100F,(Float.valueOf(Height) + 90F));
fl.closePath();
comp2D.fill(fl);
} -
I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?
As Tom said the FCS forum is the better place to post the question.
Here is Apple's best practices doc for installing both on the same system.
BTW, FCP7 is part of the FCS 3 suite of apps.
Russ
Maybe you are looking for
-
Error connecting as DBA using Data Pump Within Transportable Modules
Hi all I am using OWB 10g R2 and trying to set up a transportable Module to test the Oracle Data Pump utility. I have followed the user manual in terms of relevant grants and permissions needed to use this functionality and have sucessfully connect t
-
Can I use the music "Run down bounty" in adobe elements 11 for commercial production (short film)?
Hi, in the sound bar are some songs eg. run down bounty. Can I use them for commercial - short film? thx
-
Redemption code not working...2nd hand but unopened & sealed copy of PS CS6?
Any ideas why the code isn't accepted?
-
MacBook Pro retina 32 bit mode?
non so se esiste un modo per avviare mountain lion 10.8.2 a 32 bit come snow leopard o lion ,sul macbook pro retina per riconoscere una periferica audio a 32bit
-
Good Day: I need a recommendation, i need separate the Java system from a dual stack system, this not is the problem, the problem are 3: 1. Is a CRM System. (What i need look between systems to preserve the configurations and communications between