I am getting a Changing Password Failed error when I try to join an active directory

I had a working AD configuration under Snow Leopard. When I upgraded to Mountain Lion, my account was no longer in sync with the domain. I got the red dot on the login screen and my domain password was out of sync. I unhooked from the domain at that point. This was several months ago.
However, over the last few weeks, I keep finding myself locked out of the domain. I suspect it's something on my Mac that is trying to use my old credentials. I was hoping to rejoin the domain and see if I could get my account back in sync. When I get a domain admin to enter his password on the Directory Utility join screen, it first notes that the computer account already exists in the domain. I tell it to continue, but I can't get past this point:
2013-06-24 14:21:20.729935 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write
2013-06-24 14:21:20.732774 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - existing record found 'CN=MYMACHINE,OU=Default,OU=Workstations,OU=MyCity,OU=North America,DC=GLOBAL,DC=OURCORP,DC=NET'
2013-06-24 14:21:20.732822 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7faef36ed770'
2013-06-24 14:21:20.733141 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.734196 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.734221 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741380 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741416 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.741619 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password
2013-06-24 14:21:20.741637 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password using: MS set password in realm GLOBAL.OURCORP.NET
2013-06-24 14:21:20.741648 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - using TCP since the ticket is large: 1560
2013-06-24 14:21:20.741665 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service change_password for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.742867 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.742908 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745231 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745250 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.745398 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - set password using MS set password returned: 0 result_code 3
2013-06-24 14:21:20.745417 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Changing password failed for '[email protected]' with error '' (3)
2013-06-24 14:21:20.745426 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - setting Computer Password FAILED for existing record - 5103
2013-06-24 14:21:20.745818 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - ODNodeCustomCall failed with error 'Credential operation failed' (5103)

Reggierror,
Had the same issue and discovered that I made my AD object name too long (16 instead of 15 character which is the limit) You might want to try making the computer object name shorter if you can.

Similar Messages

I get a "Short DST" failed error when running test. Laptop will not boot up. Any ideas?

I get a Short DST failed error when I ran a test. The laptop won't bootup. All I get is a black screen

Hi,
Certainly, the error code will be a Smart or Disk Self Test failure - in either case, it would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

I get an Adobe Application Manager error when I try to install NeoVoices.

When I try to install NeoVoices, I get an error that my Adobe Application Manger is possibly damaged, updates are not possible, and that I should download and install a new version of if (Adobe Application Manger.) I'm stuck. I have downloaded and installed the latest versoin of Adoble Application Manger, but it still doesn't work, and the Manager works fine otherwise. otherwise.

Is it a 32 bit or 64 bit version?

The server did not allow this action. You have been kicked out, and cannot rejoin this chat. - Error when I try to join an iChat Chatroom

I used to be able to join iChat chatrooms using my @mac.com address but now I get this error everytime I go to join a particular chatroom however I can join others. Could anyone help me solve this?
Thanks
Joe
<Edited by Host>

Hi,
SO it has a Web Page link.
If you mouse over this link what does the tooltip or the info about where the page leads say (Wherever that appears in your Browser).
If it is in the form that will open or start a Chat in a client app it will look like this:-
<a href="aim:goim?screenname=ralphjohnsr&message=Hi+!,+I+came+from+your+websit e,+ralphjohnsuk.">
That is the a href="aim:goim will laumch an app that can do AIM chats.
The ?screenname in this case will call a specific buddy (And you can work out that the rest adds a Message when they use it)
The Tooltip or the part where you browser states what the links says, if it is a web link, and the chat is a web page type will list a standard http://URLaddress.
So, were you in the chat and tried to do something like send a file or add a Hyperlink ?
Or is it saying that you just access the Chatroom ? (It is happening before you are re-entering the room ?)
Do you know if the chatroom is Moderated at all ?
(Can you access it from another Screen Name)
7:55 PM Wednesday; August 31, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Outlook 2010: Getting a "the operation failed" error when accepting invite from inbox

One of the people I support is using Win 7 and Office 2010. When accepting an invite in his inbox, he gets "This Operation Failed", however this behaviour only occurs for internal staff who email him through Exchange. I emailed him from an external email
address and he was able to accept the invite and have it appear in his calendar correctly.
We are running Exchange 2007 and his client is Office 2010.
I'm going to try the following to try to get to the bottom of things
1. Check account settings
2. Disable antivirus
3. Try non cached mode
4. Check Delegate access?
5. Check event logs
6. Office updates / service packs
7. Repair job of Office 2010
8. Reinstall Office 2010 or install 2007
Does anyone have any other suggestions?

Glad your issue has been resolved.
Thanks for your sharing.
Evan Liu
TechNet Subscriber Supportin forum
If you have any feedback on our support, please [email protected]
Evan Liu
TechNet Community Support

I keep getting a secure connection failed error when tryin to open a site I have used for the past 3 years with no problems...It's for my college, HELP!

Secure Connection Failed
The connection to the server was reset while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.

Some security coding was remove as unsafe.
Please provide a link to a public page.

I am getting a JVM not found error when i try to install tune transfer

this is what i am getting when after i install the program tune transfer...i updated my java and i am still getting the message....any thign would help thank you
(Apr 6, 2007 10:25:07 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$Installer, err, ProductException: (error code = 601; message="JVM not found")
STACK_TRACE: 8
ProductException: (error code = 601; message="JVM not found")
at com.installshield.product.actions.JVMResolution.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallPro duct.checkUninstallerJVMResolution(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallPro duct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer. execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Thread.java:613)

> i updated my java ... message="JVM not found"
Open System Profiler and click on Frameworks
The list of Java items and versions should look like this

I am getting an out of memory error when I try to open a PDF in Acrobat XI Pro

How do I clear the memory and get rid of this message. Thanks

Hi George
I have just started to get it today. I can open documents previous documents but not new ones.
Debbie

I am getting a 404 Not Found error when I try to access Yahoo Mail from Firefox. I can log in but Yahoo Mail will not open. It will open in IE. The problem is here at home.

Not Found
The requested URL /dc/launch was not found on this server.
Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny9 with Suhosin-Patch Server at us.mg201.mail.yahoo.com Port 80

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Secure Connection Failed error when I try to download iTunes 10.3

It's been about an hour now. Just me?
http://www.apple.com/itunes/download/

we are not alone
https://discussions.apple.com/message/15376307#15376307

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

Error when I try to use the XMLElement(), XMLForest(), etc functions?

I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
Fish

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

I get a "Secure Connection Failed" error with google stating "certificate contains the same serial number"

When I click on a link for a google search, I get the "Secure Connection Failed" error in Firefox. It states, "Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority."
I have followed the instructions here:
https://support.mozilla.org/en-US/kb/Certificate%20contains%20the%20same%20serial%20number%20as%20another%20certificate
and looked at this article:
https://support.mozilla.org/en-US/questions/1028103?esab=a&as=aaq
I have uninstalled and reinstalled Firefox, deleted the entire profiles folder, and reset Firefox. I see that the older (orphaned) article points to my router. However, I have a new router and have updated its software. There is no button to add an exception (as noted in the article), so I can't just bypass it. This problem does not occur with IE, so I have a hard time believing it is my router.
How do I troubleshoot this issue? I really don't want to change browsers.

Here is a screen shot of the error.

Why can't I sign in? I get an "Ajax submit failed: error =403, Forbidden" error message

Why can I no longer sign in to ePrint Center?
I get an "Ajax submit failed: error =403, Forbidden" error message -- MAC OS 10.7, D110a printer.

Here you go.
http://www.google.com/search?q=Ajax+submit+failed%3A+error+%3D403%2C+Forbidden&sourceid=ie7&rls=com....
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I am getting a Changing Password Failed error when I try to join an active directory

Similar Messages

Maybe you are looking for