I am getting a corupted file when I run setup

I am with window 7 and when I am running the setup I get a corupted file message

try download it again http://mozilla.cdn.leaseweb.com/firefox/releases/8.0.1/win32/en-US/Firefox%20Setup%208.0.1.exe

Similar Messages

  • Getting blank pdf files when I try to view them on computers other than my Mac

    I need some assistance.  I keep getting blank pdf files when I try to view them on anything other than my Mac.  I create them in either Illustrator or InDesign and I make sure that I select High Image Quality.  I can view them just fine in my Acrobat reader, but the minute I send them out to others or view them on a PC with Acrobat Reader 7 i can't view them.  I get this message "There was a problem reading this document (111)"  Does anyone know the solution to this problem?

    Many PC users still use older versions of Acrobat or Acrobat Reader. I know some people that absolutely refuse to update beyond Acrobat Reader 4.5, often times, that can contribute. Also if you've run PDF Optimizer and removed all the fonts. That can cause a problem.
    Also, make sure you save pdf's with the .pdf extension. As much as they say the opposite PC's need to see that extension.

  • When i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    hello,
    I had the same issue. This is what I was told to do.
    iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
    Appcleaner   will do this and its free.
    The following procedure has helped solve many issues with Keynote:
    1  Close Keynote then use Appcleaner
    2  Empty the Trash
    3  Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
              allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
    4  restart the Mac
    5  Reinstall iWork
    6  Repair permissions:
              Applications > Utilities > Disk Utility > First  Aid:   click on your system disc in the drive column
              and select Repair  Disk Permissions
    7  open Keynote and test

  • How can I save my data and the date,the time into the same file when I run this VI at different times?

    I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
    2/12/03 16:04 13567
    2/13/03 10:15 35678
    So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

    evolution wrote in message news:<[email protected]>...
    > How can I save my data and the date,the time into the same file when
    > I run this VI at different times?
    >
    > I use a translation stage for the experiment.For each user in the lab
    > the stage position (to start an experiment) is different.I defined one
    > end of the stage as zero. I want to save the position , date and time
    > of the stage with respect to zero.I want all these in one file, nd
    > everytime I run it it should save to the same file, like this:
    > 2/12/03 16:04 13567
    > 2/13/03 10:15 35678
    >
    > So I will track the position from day to day.If naybody helps, I
    > appreciate it.Thanks.
    Hi,
    I know the function "write to spreadsheet file.vi"
    can append the data
    to file. You can use the "concatenate strings" to display the date,
    time as well as data... Hope this help.
    Regards,
    celery

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

    I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

    Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad.  Help!

    I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad.  Help!

    There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • How to get to your files when your Time Capsule dies :(

    I am posting this here to help someone who cannot access a Time Machine backup because
    the backup was "corrupted"
    the <insert whatever obscure message that contains the word "sparsebundle" here> message appears
    the Time Machine won't open up your backups
    the Time Capsule dies
    First of all, I absolutly am a fan of Time Machine and Time Capsule. And they work great ... until they don't - and that is when panic sets in. I haven't had a Time Capsule die on me (because I remembered to enter a "Remember to get a new Time Capsule" event for 18 months after I bought my first one) and I am meticulous about keeping backups. I am a software engineer and, well, before we had github.com ... we had to protect our hard drives.
    If your Time Capsule has died - or you can get into the Time Capsule through the Time Machine interface - you can still access you files. You don't need to go out and buy some fancy software to get back your lost stuff. You can't attach a usb cable to mount your Time Capsule (atleast on my 2T ones) - but you can open it to get to the hard drive
    Most likely - the hard drive in your Time Capsule is still good (the thing that dies seems to be the power source). The key is to
    open your Time Capsule peel back the rubber bottom and you will see some worx or hex screws
    take out the hard drive (mine was a Western DigitalCaviar Green -> thanks Apple for being green!)
    mount your drive to your Mac (you will prob have to get a SATA to USB adaptor (I use a Voyager Q)
    from the Finder (yeah, the FINDER!) navigate into "data>ShareRoot" (this is where mine was, you might have to poke around)
    double click the "sparsebundle" for your backups
    In there, like little ducks, are directories for every backup - like a normal directory structure. This completely blew my mind when I found this out. It wasn't some mysterious thing like I was making it out to be. Everything was there, in increments, as I had before.
    If you are not careful - you might damage your Time Capsule ... but chances are it is already dead. I keep my 2T WD in a safe place with a safe case for posterity. However that hard drive is just like any other hard drive ... it is just not in a Time Capsule.
    This is a last ditch effort to get back your files. I resorted to this when I couldn't access my Time Machine backups through the GUI.
    I hope that this helps someone and now, for something not so completely different: http://timecapsuledead.org

    I just wanted to point out ... that when you "double click on the sparse bundle" - you are actually opeing up the "DiskImageMounter"  and another "hard drive" will appear on you Desktop or in your FInder.
    It is this "second" Time Machine that you will find your files in date tagged directory!

  • Lightroom can not get my photo file when I go to nik plug in any help?

    Lightroom is unable to prepare my file when I go to my nik plug in. It says it can not open the file. I'm working off an external hard drive and I have tried both of them. any help out there?

    It's failing to load Main.swf
    I noticed that you do have a main.swf
    Perhaps the file was renamed at some point.
    -Marc

  • How can I suppress @ from prompting in a file when I run slqplus cmnd line

    I should know this, but varied searches have come up with nothing :-(
    I have a script myscript.sql which inserts data, mostly email addresses such as '[email protected]'. When I run this script command line for example:
    sqlplus scott/tiger @myscript.sql
    The script prompts me at every @ expecting an input param. How do I escape, ignore, suppress that? Each of the @'s in the file are already either in quotes or comment headers.

    My bad, you're right - it wasn't the @, it was a completely munged script which dos-to-unix fixed. Although it was odd that I was getting prompted. I'm chalking it up to some weird anomaly. I'm returning to the Oracle world after a 2 year hiatus and dusting off the cobwebs...
    Thanks -

  • Could not read Log4j configuration file when I run jar file

    Hi,
    I'm using Log4J in my application..
    I configure the log4j, as follows;
    PropertyConfigurator.configure("properties/logging.properties");and then go on to use it.
    The .properties is in the root when I jar my source. I use Ant to Jar the file. It all works good when I run the jar file from ant.
    The problem is when I run the jar file by double clicking on it, I get an error
    " Could not read configuration file [properties/logging.properties]."
    I tried the following options;
    PropertyConfigurator.configure("/logging.properties");
    PropertyConfigurator.configure("./logging.properties");
    PropertyConfigurator.configure("../logging.properties");But in all cases, I get corresponding errors on running the jar file through Ant:
    log4j:ERROR Could not read configuration file [logging.properties].
    log4j:ERROR Could not read configuration file [./logging.properties].
    log4j:ERROR Could not read configuration file [../logging.properties].
    I want to be able to run the Jar by double clicking on it or through Ant.. Would any one know how to fix this issue so that I can use both methods..

    Keep your properties file inside the root folder of your application.It is working fine

  • HELP: Flash Drive accepts files when I run them files corrupted

    So I have my flash drive partitioned in the Master Boot Record because in all other forms it will not appear on my computer. However, when it is partitioned like this, it will appear to accept files when I transfer them, but when I run them I receive a files corrupted message or error-43.
    I understand the Master Boot record is intended for windows, but when I partition the drive in GPT or Apple Partition Map the drive is inaccessible on my computer completely. I do not care about being able to transfer files to a PC, I just want to use my flash drive back-up and save files too. If anyone knows how I could do this I would really appreciate it.
    I searched the forums and could not find anything that has worked for me so if someone knows where it is I would appreciate a link, or if you know how to do it, I would appreciate the advice!
    Thanks

    thebigwillyp wrote:
    I know my flash drive worked on a mac because it worked months ago, it just will not now for some reason.
    Nearly everything that stops working used to work at some point. If you cannot format the drive on either a Mac (why not go back to that Mac it worked on "months ago?") or a PC, then for all practical purposes it's dead. Return if under warranty, or get a new one.

  • Getting adobe form file size at run time

    hi,
    ya i need the adobe form file size at run time. my requirement
    is to get xstring and file size of the adobe form. adobe form format is already in xstring format, but how to get the file size.

    Hi,
    try the following:
      DATA lv_file_content TYPE xstring.
      DATA lv_file_size    TYPE i.
      lv_file_size = XSTRLEN( lv_file_content ).
    This will give you the file size in Byte. For KB, just divide by 1024, and once more for MB.
    Kind regards
    Ole

  • Read a txt file when I run jar file

    Hi all,
    I have a jar file. In ir there are:
    /file.jar
       |----/pack
       |        |----MyClass.class
       |        |----file.txt
       |
       |----/META-INF
       |        |----MANIFEST.MFI want: when I execute the jar file java -jar file.jar from the java class MyClass to read the file.txt
    When I run this the error is:
    C:\Documents and Settings\pc\Escritorio>java -jar file.jar
    java.io.FileNotFoundException: file:\C:\Documents%20and%20Settings\pc\Escritorio\file.jar!\pack\file.txt (El nombre de archivo, directo
    rio o etiqueta del volumen no es valido)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(Unknown Source)
            at java.io.FileInputStream.<init>(Unknown Source)
            at java.io.FileReader.<init>(Unknown Source)
            at pack.MyClass.main(MyClass.java:20)
    Exception in thread "main" java.lang.NullPointerException
            at pack.MyClass.main(MyClass.java:31)the code into the java class is:
    package pack;
    import java.io.BufferedReader;
    import java.io.ByteArrayOutputStream;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileNotFoundException;
    import java.io.FileReader;
    import java.io.IOException;
    import java.io.InputStream;
    public class MyClass {
         private static String version = null;
         static String fich = "file.txt";
         public static void main(String[] args) {
              BufferedReader br = null;
              File file = new File(fich);
              try {
                   br = new BufferedReader(new FileReader(MyClass.class.getClass().getResource("/pack/file.txt").getPath()));
                   String j= null;
                   while ((j = br.readLine())!=null){
                        version = j;
              } catch (FileNotFoundException e) {
                   e.printStackTrace();
              } catch (IOException io){
                   io.printStackTrace();
              } finally{
                   try {
                        br.close();
                   } catch (IOException e) {
                        e.printStackTrace();
              if (version != null)
                   System.out.println("I have read : "+version);
    }in MANIFEST.MF file:
    Manifest-Version: 1.0
    Main-Class: pack.MYClassthanks very much

    thanks you!!
    I have read the file, but I have put the package when I write the file.txt, beacuse If I don't put this, givas me NullPointerException
    Now I have
    InputStream in = Main.class.getResourceAsStream("/pack/file.txt");
    InputStreamReader isr = null;
    BufferedReader reader = null;
    try {
              isr = new InputStreamReader(in, "ISO-8859-1");
              reader = new BufferedReader(isr);
              while ((j = reader.readLine())!=null){
                   version = j;
              reader.close();
    } catch ...Thanks very much

  • How to create a file when i run the report

    hi all
    i want to run the report and each time i run the same report to create a separate word file for the report o/p ?
    is there exist a procedure to create a fiel?

    hi magoo thanks for your consederation
    i use forms 10g
    But your answer is to create the file , but when i run the report next time the file overided by the new file ,
    But i want to generate a new file beside the old created file (how can i create separate file althouth the file name take the same name of the report)
    thanks.

Maybe you are looking for