I am getting a error when starting Itunes 42110

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Similar Messages

Get DEP error when starting itunes

After installing the latest version of itunes, each time I try to start it I receive an error message that states "DEP error, Windows has shut down Itunes to prevent damage to my system". Been using itunes for years with no problem. Now can not get it to work, HELP!

I managed to resolve this by carrying out the steps here. I was getting the same error after trying to reinstall the previous version (11.1.13)
http://www.reimageplus.com/fix-windows-127-error/
I uninstalled all Apple products and deleted the Program Files directories and restarted when it said.
Reinstalled and ITunes now works correctly. Hope that helps.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Receive error when starting iTunes

Receive error when starting iTunes "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have with no success.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I get a error when starting Apache Tomcat 6.0 service

Hi Friends,
I get a error when starting Apache Tomcat 6.0 service. Do you help me?
Kind regards.
Fatih Temiz
First Step:
Second Step:
Thanks for helps...

It seems like the JVM is pointing to incorrect .dll file.
Goto Apache bin directory, and from there open Apache[version]W.exe
Click the "Java" tab and ensure the first textbox "Java Virtual Machine" is pointed to the correct jvm.dll
If it was pointed to the JDK then it is wrong. Repoint it to the jre jvm located at \jre6\bin\client\jvm.dll
Let me know if it resolves the issue.

Windows error when starting iTunes 5.

Hey.
My iTunes suddenly started giving me a Windows error when starting it. I installed iTunes 5 instead of iTunes 4 recently, and it has been running. But today when I wanted to transfer some more music to my iPod iTunes wouldn't start. I just get the Windows Error... thing. What can I do? I already tried to reinstall it, but as you know, it's god d*mn impossible to completely delete Apple software without a format.
I talked to a friend of mine who had experienced the same problem, but it was his firewall/antivirus (F-Secure) that was the problem, and I'm running PC-Cillin - which I tried to disable, but it didn't help.
Help, thank you.

Deffo a missing quicktime issue. See my post Chris Rocco, "itunes launching problem.", 07:20am Oct 2, 2005 CDT
Itunes relies for some unknown reason on compression technologies in quicktime libraries. Crazy! No more quicktime alternative!

Error when starting iTunes for windows 64bit

When I start itunes (latest version as of 26-1-2014) I get the following error: The procedure entry point ?fastFree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll. I am working on a Windows 7 64 bit version.
Please advice. I have already uninstalled and re-installed iTunes, Apple Application support, MS .NET 4, Quicktime.

I managed to resolve this by carrying out the steps here. I was getting the same error after trying to reinstall the previous version (11.1.13)
http://www.reimageplus.com/fix-windows-127-error/
I uninstalled all Apple products and deleted the Program Files directories and restarted when it said.
Reinstalled and ITunes now works correctly. Hope that helps.

Error when starting itunes

I went to check for new podcasts today and when I clicked to start iTunes it first told me windows was configuring it, then it told me:
"An Error has occurred while attempting to create the directory C:\Program Files\itunes\itunesMiniPlayer.Resources\ko.lproj"
and after I click cancel yes I do want to quit it gives me:
"The Installer has encountered an unexpected error installing this package. Tis may indicate a problem with this package. The error code is 2330"
Any ideas? It worked yesterday, although itunes would freeze up during some podcasts.

Well, after trying the reinstall and still getting the same error message I restarted the computer and it ran a check disk and iTunes now works.

I get an error when installing itunes

I get the following error when trying to installing itunes "The installer has insufficient privileges to access this directory C:\ProgramData\Microsoft\Windows\Start Menu\Programs\iTunes The installation cannot continue. Log in as administrator or contact your systems administrator. and I am an Admin

Just in case, even though it's for a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Error when starting iTunes and no Quicktime

Ok, I read a topic about involving the same problem, but with that one, Quicktime would open, mine will not.
My issue is simple, when I click to start iTunes (The new one, 7.02 I believe) I get the windows error saying:
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
I have tried re-installing iTunes and Quicktime, but with no result. Also, with QUicktime, it simply will not open. No error message, it just does nothing.
Thanks for the help!

Hey CoasterGuy987,
try the tips in this article: http://docs.info.apple.com/article.html?artnum=93976
After reinstalling iTunes and Quicktime as described does Quicktime launch normally?
Jason

QuickTime error when starting iTunes

I have a 30Gb Video iPod. I have a new laptop, and moved software over from previous laptop using PC Relocator. I get an error message when I try to start iTunes: "QuickTime version 7.0d0 is installed, iTunes requires QuickTime version 7.0.3 or later. Please reinstall iTunes." I removed both iTunes and QuickTime through 'Add/Remove Programs' in the control panel, and reinstalled iTunes from both the original install disk and from the iTunes website, and got the same error. I also reinstalled QuickTime version 7.0.3, and get the same error. Has anyone run into this problem and gotten it fixed?
Thanks in advance for your assistance.

Go here and rool down to the section "Clean up iTunes installer files on the computer" then disable any antivirus programs and reinstall iTunes from the net http://docs.info.apple.com/article.html?artnum=93976
If that does not nail the issue, try installing the standalone version of quicktime here http://www.apple.com/quicktime/download/standalone.html

Runtime error when starting itunes

Lately when I've tried to start Itunes it launches, asks for my password, then give a message something like : Runtime Microsoft C++ error: This application has requested the runtime to terminate in an unusual way. Please contact the application's support team for more information.
Any ideas?

For what it's worth, I had the same problem that seemed to appear after I installed the Beta of Safari for PC, which also installed the Apple Updater. I uninstalled Safari - still had the runtime error. I uninstalled the Apple updater - the runtime problem went away and iTunes opened as normal. When iTunes opened after I uninstalled the updater, the message from iTunes appeared asking to update to 7.3. Perhaps there is a conflict between the updater and the one built into iTunes.

Received following error when starting itune

Quicktime failed to initialize (error - 2096)
I had downloaded and installed quicktime and itune. Able to launch quicktime, but unable to start itune. Keep getting the error above. Help please!

Manoj,
it looks like the USER data needed to connect to the instance hasn't been saved correctly. Please look at SAP note 39439 and save this data.
If you continue to have problems, you will need to open a CSS message.
Regards,
Ashwath

Why am i getting an error when downloading itunes...Error 2: apple application support was not found

Tryin to download Itunes on my laptop and the error message pops up. It tells me to to unistall and reinstall and its not fixing the problem??

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I am getting a error when starting Itunes 42110

Similar Messages

Maybe you are looking for