I am getting a no volume available on Pandora

I get a message when opening Pandora that says ' no volume available'

Hello , I would like to help you with your fax setup, but can you specify your exact printer model for me? In your title you have specified a laserjet m1217nfw, and in the body of the post a Pro 6830.How Do I Find My Model Number or Product Number? Here are some helpful documents for the laserjet m1217nfw;Setting up the FaxSending a FaxFaxing with VoIP Services As well as a document for the Pro 6830;Sending and Receiving Faxes, Set up the printer for faxing I would also need some more information about your fax/phone line setup to assist you further;Is this a Dedicated phone line? Only being used for faxing.Or is it a Shared phone line? Phone and Fax.Is your phone provider Analog (Typical Phone lines) or Digital? (Cable Connection)If the line is shared;Do you have Distinctive ring service? 2 numbers, same phone line that have different ring patterns to indicate teh type of call coming inDo you have an Answering machine? An answering machine answers voice calls at the same phone number you use for fax calls.Do you have Voice mail? A voice-mail subscription service uses the same phone number as the fax. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Similar Messages

I keep getting the message "no volume available" when I hook my iPad up to my TV to watch netflix, does anyone know how to fix this?

I am trying to hook my iPad up to my TV so I can watch netflix on it, however, when i hook the AV cable up i get a message that says "no volume available." my iPad is not muted, does anyone know how to fix this problem?

Read this link and it may provide some help: https://discussions.apple.com/message/15460209#15460209

Audio stopped working only getting 'dock connector'/ 'no volume available messages

Last week, my iPad2 suddenly stopped producing external sound e.g. radio with the message of 'no volume available' coming up. Switching to the iPod app, the mesage of 'dock connector' appears.
I can hear everything if I insert my headphones but this is not practical for me as I move about the house/ workstation.
I am presently overseas and I've already run through every suggestion from Apple's Help line experts with no fix.
From review other message boards, this seems to be a growing probblem. Any advice from anyone?

Solution discovered: The iPad had not been properly ejected when last docked to my laptop. Please ensure that you get the 'Eject' prompt when you right-click. If you do not, try to eject via iTunes programme on PC/ laptop. If 'Eject' prompt is still not present, take out Apple USB and re-insert into the PC dock (or another USB dock location on the computer) as it is not being recognised by iTunes or PC/ laptop. 'Eject' command should then appear and you then click on it. Voila!

I use my iphone 3G to listen to radio stations. Now get "no volume available" message. Anyone had this problem?

I use my iphone 3 to listen to radio stations. Now I'

I just found the earbuds that came with the phone still in the box, plugged them in & it's letting me listen to radio.com. When I unplug them I go back to 'no volume available'.

'No Volume Available' but headphones work

Weird problem just cropped up today on my iPhone 4 (no longer under warranty). If I try to play the Music app, Pandora, YouTube and many other sound apps I can't hear the audio over the speaker and on some apps a message appears saying 'No Volume Available' on the screen. It has this message in Pandora, in YouTube and the music app just don't have the volume slider.
If I plug in headphones all work normally.
If I use the Phone app, or Talkatone I can hear the audio via the earpiece and I can switch it to the speaker. So I know the speaker system works as some apps detect the speaker and can route audio through there. Skype on the other hand works via speakerphone but not via the earpiece. Key-clicks and lock sounds don't work via the speaker.
I've reset the iPhone a few times, 2x via holding down the power key and shutting it down then restarting with the Apple logo and once forcing a shutdown via power+home buttons.
I've restored the iPhone, I'm running iOS 5.0.1, bluetooth is off, mute switch on the side is on (I've switched it both on and off, didn't do anything). I've tried plugging/unplugging in headphones to see if debris or something would be knocked loose but that didn't work. Plugging/unplugging dock connector several times didn't work either.
I'm wondering if an app I tired did something weird electrically? I had a headphone jack plugged-in and ran the TASCAM recording app to try and record something. Had a tough time figuring it out and it was while I was trying it that the problem seemed to occur as I couldn't hear anything recorded via the app.
I've since removed the app and done all of the above to no avail. I'm going to try another restore. And don't suggest I just go to an Apple Store, the nearest one is a few hundred miles away on another island.

I went to an Apple Store and let a 'Genius' check it out. First thing he says is that the water damage indicator was activated in the bottom dock connector. I've never dropped my iPhone 4 in water though I probably do live in one heck of a humid place so maybe that's why it activated. He had opened it up and I asked him if there was any indication at all if there was water damage in the iPhone and he said 'no.'
I let him wipe the phone since I had it backed-up via iTunes. Then it started to work and thought we had it fixed but then all of a sudden it stopped producing sound again. This is with no extra apps loaded on it and right there at the Genius Bar with the Genius there. He operated the controls and was just stumped.
He said because it was out of warranty I could get a replacement one there at Apple for (I forget) something like $149, or I could wait a few week when I can get an early upgrade to an iPhone 4S for $199 (that would only be for the 16GB model, mine is a 32GB iPhone 4).
So yeah, the Genius couldn't figure it out. The phone's sound continues to have this problem along with the problem, which I hear many people have, of the home button being disfunctional at times. The iPhone 4 is a flawed design in so many ways: Antenna, Home Button, Audio System, Lower Battery life with iOS 5.

In ical edit, can you get rid of invitees, availability, url, notes?

in ical edit, can you get rid of invitees, availability, url, notes?

in ical edit, can you get rid of invitees, availability, url, notes?

How do I get the full volume to return after disconnecting HDMI and MAC BOOK PRo from tv?

After buying and connecting the HDMI cable from my MAC BOOK PRO to my tv to play DVDs I had no sound on my tv. So I followed suggestions from this communintyl through selecting PREFERENCES/sound and following the instructions and was successful. After disconnecting all from my TV my tv will not return to it's FULL volume capabiliity. How do I get the full volume to return to my tv?

Some suggestions
Turn off the TV/ turn it back on
Turn up the volume

How can I get no of files available in a single folder ?

HI friends...
How can I get no of files available in a single folder ?and also want the total no of files that r belongs to different extentions.. i.e. if I hava 2 doc n 3 text file or other formate..
I want to know all in seprate...

[http://forums.sun.com/thread.jspa?threadID=5333691&messageID=10435122#10435122]
trible?

In bridge i select a jpg image with cntrl r to open in camera raw but get "camera raw not avail"

In bridge i select a jpg image with cntrl r to open in camera raw but get "camera raw not available" camera raw editing requires that a qualifying product has been launched at least once to enable this feature. I can open nef. in camera raw with no problem.

Hm, what I suggested might actually be a possibility then...
Close whatever version you have open first...
I think Adobe installs shortcuts for both 32 and 64 bit Photoshop in the start menu.
If you can't find the 32 bit Start menu entry, look for the 32 executable here (changing the CS version number to whatever yours is):
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
-Noel

How to get Search and offline Availability properties in SharePoint using powershell with CSOM

Hi,
I want to get the information about the SharePoint sites being crawled or not. I tried to get "Search and offline Availability in SharePoint" settings properties but I couldn't get those properties.
I followed below thread with no luck : http://www.c-sharpcorner.com/uploadfile/anavijai/search-and-offline-availability-in-sharepoint-2010/
I couldn't find $web.AllowAutomaticASPXPageIndexing property at site level but i can see $list.NoCrawl
at list level.
Can any body help me out to get those values?
Any help would be greatly appreciated.
Thank you.
AA.

Hi,
Since AllowAutomaticASPXPageIndexing is a member in SPWeb members while not in Web members, we can not use Client Side Object Model with it. If you need to use it in client side, you need to create a web service for it.
https://msdn.microsoft.com/EN-US/library/microsoft.sharepoint.client.web_members.aspx
https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spweb_members.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Where can I get a list of available selection for certain dict type?

Where can I get a list of available selection for certain dict type in code? For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria. One of them would be "VBTYP_N". When I click on the square next to the option, I am presented with a list of possible values to select from. Where can I get the list of this possible values for any given dict type in code?

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

Formula - Get the remaining space available on the report page

Post Author: Gerd
CA Forum: Formula
Hello,
i need the output positions (on Page) of the last record of a group.
It is possible the get the output coordinates (Pager x and y-Position) of this record.
Or it is possible to get the remaining space available on the report page with a formula ?
The formula should look like this. (e.g.)
if OnLastRecord and
ReportFieldName.OutputPositionY > MyLimit then
..... [do something]
or is this there a property where i can get the last output position
thanks

Post Author: synapsevampire
CA Forum: Formula
You'd need to keep a counter of lines used per page to do this.
The amount of space isn't a property or a functionj within Crystal itself.
Perhaps you shoukld post why and what the requirements are rather than asking that a specific architecture be used.
I' can tell that you're bright, however there just might be someone somewhere with a different way of addressing the need.
-k

Cannot get Local Connection, No available resource, Wait-time expired

Hi Friends,
Please answer my queries below.
Thanks and Regards
Busincess Requirement
I have to display a particular set of rows in a dashboard or screen, and it is being refreshed every 1 minute, also user can update from that screen displayed values.
The below program extracts some data from database and passes to the front end through a collection where it is being displayed.
Code Logic Flow
1. CockpitAction calls CockpitOraDAO for database results
2. CockpitOraDAO is a singleton class.
3. After getting the CockpitOraDAO object, the action will then call the getLabAreaCockpitDetails() method.
getLabAreaCockpitDetails will
     - Get the Connetion from the OracleConnectionManager class (It is a plain class with getPooledConnection() and releaseConnection() methods).
     - Execute the query and put the result to a collection
     - close the connection
     - return result to the calling action.
This getLabAreaCockpitDetails() are called around once in every 1 minute
So, I believe everytime a call is made to action for cockpit display, it will take the existing object of the CockpitOraDAO class and make a call to database. i.e there will be only one object of CockpitOraDAO reside in application server at any particular interval of time.
My Understandings
1. Only 1 object of CockpitOraDAO will reside in application server (provided it is not user longer and garbage collected) at a particular instance.
2. Many objects of Connection will be created and destroyed.(Each time the getLabAreaCockpitDetails() method is called, we will get one connection from connection pool and in finally the Connection will be released to connection pool).
My Problems
It is showing the "Cannot get Local Connection, No available resource, Wait-time expired"
after running around 1 full day.
My doubts
1. Can anybody say why I get this error ?
2. There may be some connections are not closed. But I have checked at finally block, the status of the connection is closed after calling this method.
3. There may be some problem due to the singleton instane of CockpitOraDAO, Is it affecting performance ?
4. Is it valid that I have to make CockpitOraDAO as Singleton ?
public class CockpitOraDAO extends DAOAdaptor //implements BISample
     private static CockpitOraDAO instance=null;
     private static boolean debug = true;
     * The below method will be used to provide the singleton intance of the CockpitOraDAO object.
     public static CockpitOraDAO getInstance()
          if (instance == null)
               synchronized (CockpitOraDAO.class)
                    if (instance == null)
                         instance = new CockpitOraDAO();
          return instance;
     * The below method will be used to get the cockpit details of the lab area.
     * This will return collecton of sample details for the specific lab.
     public Collection getLabAreaCockpitDetails(Collection prevCockpitDetailList,Collection filterCriteria) throws Exception
     if(debug)
          System.out.println("Inside CockpitOraDAO::getLabAreaCockpitDetails() method");
          Connection conn = null;
          boolean sampleExists = false;
          PreparedStatement pstmt=null;
          ResultSet rs=null;
          String returnStr=null;
          StringBuffer sqlQuery = null;
          String tempComment1=null, tempComment2=null;
          LabCockpitDO labc=null;
          LabCockpitDO labc2=null;
          Collection resultList=null, manCommentList=null, labCommentList=null, labCompCommentList=null;
          ArrayList result1List=null, prevCockpitDetail1List=null,filterList = null;
          OracleConnectionManager manager = null;
          boolean flag = false;
          try
               labc2 = new LabCockpitDO();
               prevCockpitDetail1List = (ArrayList) prevCockpitDetailList;
               sqlQuery = new StringBuffer();
               sqlQuery.append("select s.sample_sample_no sample_no, s.sample_inspection_lot_no inspection_lot_no,");
               manager = new OracleConnectionManager();
               conn = manager.getPooledConnection("myDS");
               pstmt = conn.prepareStatement(sqlQuery.toString());
               if(debug)
               System.out.println("Query********"+sqlQuery.toString());
               rs = pstmt.executeQuery();
          catch(Exception e)
               //System.out.println(e);
               throw e;
          finally
                    try
                         manager.releaseConnection("myDS");
if(debug)
System.out.println("Connection Status Closed=true/ Open=false=["+conn.isClosed()+"]");
if(conn!=null || !conn.isClosed())
conn.close();
if(debug)
System.out.println("Connection Status After Closing Connection Closed=true/ Open=false=["+conn.isClosed()+"]");
                         if(rs != null)
                              rs.close();
                         if(pstmt != null)
                              pstmt.close();
                         conn = null;
                         pstmt=null;
                         rs = null;
                         sqlQuery=null;
                         returnStr=null;
                         labc=null;
                         labc2=null;
                         manCommentList=null;
                         labCommentList=null;
                         labCompCommentList=null;
                         tempComment1=null;
                         tempComment2=null;
                         resultList=null;
                         prevCockpitDetailList=null;
                         prevCockpitDetail1List=null;
                    catch(Exception e)
                         //System.out.println("Unable to Release Connection ="+e);
                         throw e;
          //if(debug)
          //System.out.println(resultList);
          return result1List;
     }

Hi,
As you can see from other posts, this is a very common problem. Until now the cause always ends up pointing to a connection not being close.
I suggest you try to run through a full single cycle of you app, while using the CLI monitoting to check that the connections created/closed matches the expected created/closed connections. Also that the number of free connections at the end is correct.

Pandora app - iPhone 4 - docking - "no volume available"

My pandora app on my iPhone 4 worked fine last week when I would dock it into my Sony alarm clock. now- when I dock- I am receiving a "no volume available" message on my phone & the sound stops.

hmm.. My phone always says "no volume avaliable" when i have it connected to exterior speakers (using the 30 pin music connector) but volume always works.. its just not adjustable. are you sure your speakers havent broken?

I am getting a no volume available on Pandora

Similar Messages

Maybe you are looking for