I am getting a Two Tier Service from BT - Mods?
It just got me thinking, all us without iPlayer at the moment are effectively suffering.
We are paying the same charges for a service that is effectively a lower tier (bugs aside) compare to everyone that has iPlayer now. To me this is a two tier service.
Personally I think anyone that does not have iPlayer should be entitled to a rebate on their bill until they recieve it. Yes I know iPlayer is free and I agree the content is free, but somebody has to pay for the software that runs it? and lets face it iPlayer has a lot more content than Replay has?
And when these so called Linear channels come along (Linear TV via Broadband - Multicast) I bet the same thing will happen then, We will all pay the same monthly fee, some will have it, some will not, the have nots will effectively be getting ripped off as they are getting charged the same for a inferior service.
It happened before with ADSL/ADSL Max, and is happening now from what I can see with ADSL Max/Infinity.. People can get Infinity for the same price as ADSL Max.. i would love to have infinity for the same price where I am now but I doubt I will see it this side of 2020, same for Linear TV..
How much longer are people going to put up with this two tier service? Last time I checked with Virgin Media, the cost was different based on what you selected And what you could get....
Now you have changed the terms of the argument you are making from a two tier service to how BT rolls out products and try to compare it to browser upgrade.
You are not only shifting your point now but making an absurd comparison.
Think of it more akin to digital switchover. There are some places in the country that still can't get Freeview or even analogue Channel 5. There are places where even after DSO they only get a small number of channels.
If you take this back to your original argument then all of it two, three and four tier services and all who don't get everything should be compensated in some way. It really doesn't stand up to scrutiny.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.
Similar Messages
-
Name of the table where can get the two fields Valid-From and Valid-to for
Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
KaisarYou can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM -
I have one iphone 5 16 gb white colour with me and its in still under warranty and my phone was fallen down by chance and it got turned off totally and not even switched on also then i went to apple authorised service center for regarding the same . then service center people said that sir you need to submit your phone , after that i left my phone to service center and after two days i have got one call from service center that sir your phone is under phisical damaged condition so u will not be abel to get warranty from apple this will cover under paid replacement and you need to talk to apple customer care also regarding this .same .
Then i called up to apple customer care and they said sir we have got some images from the service center regarding your phone and we found that your logic board is damaged from inside and you would not be abel to get the paid replacement also you need to buy a new phone on stock price i was shocked on that time why would i pay 40 to 50 thouasnd again on iphone if its not that much stronger to take bit of imapcts like this
I had talked numbers of time to service center also but they all are denied against the complainst
if any body is there how can help me out regarding this so pls register my complaint and help me out from this highly dissatisfied service from apple .
Thnaks
karanWarranties do not cover damage
-
SMLETS. Get related Business Services from a Configuration Item
Hi
I need som help or guidiance on how to create a PS query to list out all the related business services from a Configuration Item (Computer) using the Windows Computer Class
Im using the following orchestrator activity today to get the related business services from the CI.
Thx for all replys! :)Hi,
you can use this script as an example:
Import-Module smlets
#Definde Input-Values
[String]$Server = "SCSMSERVER"
[String]$SCObjectGUID = "6555226c-5e77-ea85-b79f-05dc8843dcb0"
#Get Computer-Object by SC Object GUID
[System.Object]$Computer = Get-SCSMObject -Id $SCObjectGUID -ComputerName $Server
#Get Relationship Class "Is Related to Configuration Item"
[System.Object]$Relationship = Get-SCSMRelationshipClass -Name "System.ConfigItemRelatesToConfigItem" -ComputerName $Server
#Get defined Relationships by target
[System.Object[]]$RelatedBSs = Get-SCSMRelationshipObject -ByTarget $Computer -ComputerName $Server | where { $_.RelationshipId -eq $Relationship.Id }
#Create Arrray for Orchestrator Published Data
$BusinessServiceDisplayNames = @()
foreach($RelatedBS in $RelatedBS)
#Add DisplayName of Business Service to Output-Array
$BusinessServiceDisplayNames += $RelatedBS.SourceObject.DisplayName
$BusinessServiceDisplayNames -
To Join To the Adobe Story Service from Turkey
Dear Sir,
I want to use the Adobe Story frommy country .But The Adobe Story couldn't be sold for my country.I want to get and use this service from my country.I spoke with a chat assistant .They gave me a telephone.But The Adobe should give to Turkey permit to use this service.
Best Regards
Mursit Hakan Cil
German TeacherHi EugenGh,
If you bought the software from Adobe you can log into your Adobe account and click on 'My Orders'.
You can then check in 'My Recent Orders' or 'My Order History'.
There you will find your serial number and Download link for the full product.
If it's a boxed product you ordered then let me know and I will upload the software and provide you the link to download. -
Airports (extreme&express 5th generation) can't get IP thru DHCP service
Hey everyone!
I got 2 devices Airport Extreme and Airport Express (5th generation both). I got the same problem on each of them. And i got additional ancient router D-Link DIR-300.
So, i got a cable in my appartments from my ISP and it works simple thru DHCP.
D-LINK DIR-300 works perfect with my ISP, getting IP very fast thru DHCP and works smooth, and i can easily renew ip thru web interface of this device if i want.
Both of my apple network devices can't get IP from my ISP by DHCP service. And if I use Renew Lease button in Airport Utility it doesn't react at all. But they are easily getting IP thru DHCP service from D-LINK.
I've connected ISP cable directly to my Macbook Pro and it works perfect aswell. DHCP server of my ISP assigns correct IP to my mac.
What's wrong with my apple devices? Or any other suggestion how to solve problem?Hello Joel Goldsmith. Welcome to the Apple Discussions!
Although you have already performed a power recycle, did you enough time to allow the modem to "recognize" the MAC address of the new device (AEBSn) connected to it?
Modem/Router Power Recycling - Quick
o Power-off the DSL modem, AEBSn, & computer(s); Wait at least 5 minutes.
o Power-on the DSL modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the DSL modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the DSL modem; Wait at least 30 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s) -
How to bring MSSQL database from suspended mode to online mode?
Hi,
I restarted services through SAP MMC & couldnt restart the service. ABAP work processes Ended & disp+work.exe stopped.
I checked all SAP related & SQL related services; they were up, but when i tried logging in to the database it was in Suspended mode. I could not login to the database.
Can anyone tell me the reason for my database going to suspended mode & help me getting my MSSQL 2005 database from suspended mode to online mode??
Thanks,
JigarI somehow managed to get my database up but still when i m trying to start the services from SAP MMC then disp+work.exe stops after sometime.
Below is the developer trace of disp+work.exe ; plz help
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid PRD
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, optimized
pid 1888
Tue Feb 26 14:34:16 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1888) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Feb 26 14:34:22 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >srvsappd_PRD_00 <
DpShMCreate: sizeof(wp_adm) 30160 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 068C0040, size: 4942392)
DpShMCreate: allocated sys_adm at 068C0040
DpShMCreate: allocated wp_adm at 068C2090
DpShMCreate: allocated tm_adm_list at 068C9660
DpShMCreate: allocated tm_adm at 068C9690
DpShMCreate: allocated wp_ca_adm at 06CDC190
DpShMCreate: allocated appc_ca_adm at 06CE1F50
DpShMCreate: allocated comm_adm at 06CE3E90
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06D64D50
DpShMCreate: allocated gw_adm at 06D64D90
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06D64DC0
DpShMCreate: allocated wall_adm at 06D64DC8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
Tue Feb 26 14:34:23 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
Tue Feb 26 14:34:25 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( srvsappd) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >srvsappd_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Feb 26 14:34:26 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 133
Release check o.K.
Tue Feb 26 14:35:05 2008
ERROR => DpHdlDeadWp: W0 (pid 888) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 2704) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 924) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 2088) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 1780) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W5 (pid 2932) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W6 (pid 1328) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W7 (pid 1332) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W8 (pid 2948) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 492) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 1976) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W11 (pid 2288) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W12 (pid 2716) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W13 (pid 2564) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W14 (pid 712) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W15 (pid 3080) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W16 (pid 1588) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W17 (pid 3084) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W18 (pid 1616) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W19 (pid 2856) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W20 (pid 1912) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:15 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Feb 26 09:05:15 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 888 Ended no 1 0 0
1 DIA 2704 Ended no 1 0 0
2 DIA 924 Ended no 1 0 0
3 DIA 2088 Ended no 1 0 0
4 DIA 1780 Ended no 1 0 0
5 DIA 2932 Ended no 1 0 0
6 DIA 1328 Ended no 1 0 0
7 DIA 1332 Ended no 1 0 0
8 DIA 2948 Ended no 1 0 0
9 DIA 492 Ended no 1 0 0
10 UPD 1976 Ended no 1 0 0
11 UPD 2288 Ended no 1 0 0
12 UPD 2716 Ended no 1 0 0
13 ENQ 2564 Ended no 1 0 0
14 BTC 712 Ended no 1 0 0
15 BTC 3080 Ended no 1 0 0
16 BTC 1588 Ended no 1 0 0
17 BTC 3084 Ended no 1 0 0
18 SPO 1616 Ended no 1 0 0
19 UP2 2856 Ended no 1 0 0
20 UP2 1912 Ended no 1 0 0
Dispatcher Queue Statistics Tue Feb 26 09:05:15 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
4
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 2 ( 25%), shm 6 ( 75%)
since last update total 8, udp 2 ( 25%), shm 6 ( 75%)
Dump of tm_adm structure: Tue Feb 26 09:05:15 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Feb 26 09:05:15 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:20 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >srvsappd_PRD_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2404) (SOFT_KILL)
Stop icman
killing process (308) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2404 HANDLE:1476)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:21 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2404 HANDLE:1476)
wait for end of icman
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:22 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:23 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:24 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:25 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:26 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:27 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:28 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1484)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1505
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 26 14:35:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:308 HANDLE:1484)
DpStartStopMsg: send stop message (myname is >srvsappd_PRD_00 <)
NiIMyHostName: hostname = 'srvsappd'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Feb 26 14:35:33 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1380 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1380 (pos=2)
SiSelNRemove: removed sock 1380
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/21
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1380
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1888) [dpxxdisp.c 10417]
Good Bye ..... -
Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
Kernel Extensions in backtrace:
com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver 1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 7.1.2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.ATIRadeonX2000 7.1.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.CoreStorageFsck 182.10
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AirPortBrcm43224 500.36.11
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI2600Controller 7.1.2
com.apple.kext.ATISupport 7.1.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.CoreStorage 182.10
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
DaveHi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave -
Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers -
HELP!!! I bought two new phones from Verizon stores for Christmas presents and can't activate either one. When I try to go on-line I get a message that the activations can't be processed.
When I try to call, I get a message that they have Activation support for today but long hold times (understandable) and the automated system keeps hanging up on me (not understandable).
Any hints on how to talk to someone and get these working today?massive frustration that the phone process kept hanging up on me. finally got to chat with a customer service person (not sure how because I could never find a chat option on-line). Kari was GREAT; stayed with me and fixed what ever needed to be fixed.
-
Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download from other stores. Why do am i forced to try to nread Japanese when I have selected English as my language. The price for Downloads is no different and even if it was I am happy to pay. This also applies to Movie rental which is crazy and extremely restrictive. I a supposed GLOBAL community why does Apple do this.
You can buy ONLY from the itunes store of your country of residence (As proven by valid billing address of credit card) and ONLY while inside the borders of that country.
These are the terms of the itunes store. -
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
Getting "Origin is not allowed" When Trying to Invoke RESTful Service from Another Domain
I am having problems trying to invoke my RESTful web service from a different domain. I'm well aware of the normal restrictions of cross-site / cross-domain scripting but in Oracle documentation it says that all origins are allowed by default when creating a RESTful service without using authentication.
I have created a very simple service and am trying to invoke it using jQuery.Ajax calls from a different domain and I am getting XMLHttpRequest cannot load http://address_to_my_web_service. Origin http://calling_from_address is not allowed by Access-Control-Allow-Origin.
I understand that using JSONP instead of JSON is actually the best practice around cross-site scripting but it appears as though APEX does not support JSONP because with JSONP, there are URI parameters added to the base request (callback).
I am stuck and would greatly appreciate any help.
I'm starting to wonder if this could be a bug because Oracle documentation says all origins should be allowed when using a service that does not require authentication. I also tried to force the origin to be allowed by typing it in and also using the wildcard '*' and it still did not work.
Thanks,
Mark Williamson
EDIT: It is now working after adding a URI prefix to my web service module.The SSL handshake works differently to a browser as it is making the connections automatically.
The browser asks every time if you want to trust an expired certificate, and it also recommends not to. Its impractical to manually check every service call to say do you trust the certificate so the functionality doesn't exist. I doubt any integration product does this. Therefore there isn't a option to ignore the certificate if it has expired.
This makes sence as the certificate is untrustworthy. The whole idea around SSL is trusting the site you are communicating with, all parties need to be trusted. This stops hackers from replicating their site and intercepting data.
If the administrator of the remote site is not willing to renew the certificate, are they really interested in SSL. I suggest they expose a non SSL service.
cheers
James -
Getting .ServiceException while invoking a web service from a client
I created a web service and then created a web service client from wsdl in eclipse. I am getting the following error when trying to call the web service from client.
javax.xml.rpc.ServiceException: There is no stub implementation for the interface: examples.ejb.ejb20.basic.statelessSession.TraderBeanService
Please find the files here -
wsdl - http://www.sourcepod.com/uneksu63-9627
Trade.java - http://www.sourcepod.com/mltizr21-9628
TradeResult.java - http://www.sourcepod.com/npledh19-9629
TradeResultService - http://www.sourcepod.com/hbjevm45-9630
TradeResultServiceLocator.java - http://www.sourcepod.com/mrpagh85-9631
TradeResultSoapBindingStub.java - http://www.sourcepod.com/zjrkjv91-9632
package examples.ejb.ejb20.basic.statelessSession;
import javax.xml.ws.WebServiceRef;
import javax.xml.namespace.QName;
public class HelloClient {
@WebServiceRef(wsdlLocation="http://localhost:7001/webservice/services/TraderBean?wsdl")
String url = "http://localhost:7001/webservice/services/TraderBean?wsdl";
QName qname = new QName("http://statelessSession.basic.ejb20.ejb.examples", "TraderBeanService");
public static void main(String[] args) {
try {
HelloClient client = new HelloClient();
client.doTest(args);
} catch(Exception e) {
e.printStackTrace();
public void doTest(String[] args) {
try {
TraderBeanServiceLocator service = new TraderBeanServiceLocator(url,qname);
TraderBean port = (TraderBean) service.getPort(TraderBeanService.class);
System.out.println("Invoking the sayHello operation on the port.");
TradeResult response = port.buy("INR", 100);
System.out.println(response.getNumberTraded());
} catch(Exception e) {
e.printStackTrace();
}How to solve the stub implementation error?
Edited by: 901007 on 12 Aug, 2012 10:57 AMThat did not work either. There was getPorts() and not getPort() and I used getPorts(). And I am getting the below error,
java.lang.ClassCastException: java.util.HashMap$KeyIterator
But when I try like the below,
@WebServiceRef(wsdlLocation="http://localhost:7001/webservice/services/TraderBean?wsdl")
String url = "http://localhost:7001/webservice/services/TraderBean?wsdl";
QName qname = new QName("http://statelessSession.basic.ejb20.ejb.examples", "TraderBeanService");
TraderBeanServiceLocator service = new TraderBeanServiceLocator();
TraderBean port = (TraderBean) service.getPort(TraderBean.class);
System.out.println("Invoking the sayHello operation on the port.");
TradeResult response = port.buy("INR", 200);
System.out.println(response.getNumberTraded());I am getting the below error,
Invoking the sayHello operation on the port.
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.lang.InstantiationException: examples.ejb.ejb20.basic.statelessSession.TraderBean
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}hostname:Gopi_Desktop
java.lang.InstantiationException: examples.ejb.ejb20.basic.statelessSession.TraderBean
As you can see the statement"Invoking the sayHello operation on the port." is getting printed but after that error is thrown.
I tried changing it to, TraderBean port = (TraderBean) service.getPort(qname, TraderBeanServiceLocator.class);
But even this is throwing the same error, java.lang.InstantiationException: examples.ejb.ejb20.basic.statelessSession.TraderBean
I changed my webservice using Axis2 web service runtime and this time when I try to invoke using client, I am getting the following,
[WARN] Weblogic's StAX implementation is unsupported and some Axiom features will not work as expected! Please use Woodstox instead.
Exception in thread "Main Thread" org.apache.axis2.AxisFault: javax.xml.stream.XMLStreamException: Error at line:1 col:217 ':' Already got a ':' in name
at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:531)
at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:375)
at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:421)
at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
at examples.ejb.ejb20.basic.statelessSession.TraderBeanStub.addTwoNumbers(TraderBeanStub.java:185)
at examples.ejb.ejb20.basic.statelessSession.TestClient.main(TestClient.java:15)
If you need more details, I can post the steps I did to build it...
Any help is greately appreciated.
Edited by: 901007 on 15 Aug, 2012 10:27 PM
Edited by: 901007 on 15 Aug, 2012 10:49 PM -
How do I transfer contacts from an Android to an iphone 6? I have backed up everything to Verizon Cloud but I can't get the two phones to pair up?
The problem is non compatible devices. You could go to a Verizon corporate store and they could try to transfer them, however many customers stated this has resulted in loss of contacts. They don't guarantee a transfer.
http://www.macworld.co.uk/how-to/iphone/transfer-contacts-music-photos-apps-from-android-iphone-3459466/
Move content from your Android phone to iPhone - Apple Support
Verizon's cloud is rated at the bottom.
Good Luck
Maybe you are looking for
-
In the last week or so, Design view in CS5 has become completely broken for me. I usually use Code View, but sometimes it's handy to switch to Design view or Split view, which are now always grayed out. I had installed the HTML 5 pack, not sure if th
-
Opening a stored procedure in Crystal 12 with all formatting intact
Is it possible to use Crystal to revise something in a stored procedure when the entire report was created via SQL? For clarity, I didn't create the procedure in question. I am trying to update some wording in a text box, but when I tried to pull up
-
HT4489 how can transfere my contact from the old phone to the new one
Hi Please assist Im struggling to transefere my information {phone book, gallary etc} from my old to the new please assist Regards
-
Why ios 7 isn´t compatible with iPod touch 4th?
why the iPod touch 4 cant suppport the ios 7?
-
Connect Laserjet M680 MFP on 2 Networks with Firewall
Hello We were thinking of connecting the printer HP Laserjet M680 MFP to our Local Secure Network and to an Unsecured Internet Wireless Network through a second JetDirect (the latter is to enable Wireless Printing ) - And by connecting the printer to