I am getting an Error in CO13 while cancelling conformation
Dear Gurus ,
I am getting a error while i am cancelling the Conformation . I have copied the error message below . Can anybody help me out for the same .
Error Message : Confirmed activity must not be smaller than 0
(check entry)
Thanks in advance .
Regards
Shankar
hi
You have tried to confirm a negative activity or to cancel a confirmation.
This results in a negative total confirmed quantity for this activity.
Procedure
Check the total confirmed activity.
Enter a different quantity for the activity or cancel other confirmations.
you need to enter the quanity
-ashok
Similar Messages
-
I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"
Same problem here in Brazil.
It seems to be a problem with logging in App Store in the Mac (Yosemite 10.10.2).
When I tried the very same userid and password I was able to login in to use my iCloud account from the same computer and also from my iPhone. -
Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is backing up data from the iPhone before installing the new operating system. I have done everything suggested in Apple support with no success. I still get the error everytime (about 5 minutes into backing up iPhone data). How can I upgrade to iOS5 without losing all the data on my iPhone (the error message says that if I continue I will lose all data on the phone)? If I have already synced the phone before upgrading the OS, would I be able to restore my data after installing the new OS by syncing after the OS upgrade is complete? Any help would be greatly appreciated.
I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first. -
Everytime iTunes opens on my Windows 7 pc, I get the error message -42110 while it appears iTunes is trying to download a movie I didn't order. Any suggestions?
Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!
-
I am getting an "Error 1310 message while trying to install. What can I do to fix this?
I am getting an "Error 1310 message while trying to install. What can I do to fix this?
Error "1310: Error writing to file: C:Config.Msi..."
Mylenium -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?
The IOS5 upgrade will erase everything on your iPad, so make sure you have a good backup before you start.
If not, you will just have to reenter all of your settings all over again. Have you ever backed it up successfully? -
I keep getting "An error has occurred while trying to access the service".
I'm using Adobe Reader to convert pdf. to word for the first time. I keep getting "An error has occurred while trying to access the service". My subscription has gone thru and I am signed in. Help! I need to start using this ASAP
Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
[topic moved to ExportPDF forum] -
I get an error when attempting to cancel my subscription to The Daily Read.
Anyone getting an error when trying to cancel a subscription? I get a website error. It's pretty frustrating. I also get an Ajax error when trying to send a message to an HP expert.
Hi havequick99,
Try the solutions located at this website: How to Manage, Pause, or Unsubscribe from Prints and Faxes
If you got an error at ePrintcenter.com, it may be the website was experiencing technical problems and you can try again.
Please post here if you this solved your problem (and select Solved) or if you need further help.
I work on behalf of HP. -
Getting an error in startdb while restarting sap services
hi Experts ,
while restarting my sap services it gets an error at startdb and log file is shown below
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
16:33:22 22.11.2010 LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.00 5L-64 bit 070920
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 356538) is already running .....
saposcol already running
Running /usr/sap/LBD/SYS/exe/run/startdb
Trying to start LBD database ...
Log file: /home/lbdadm/startdb.log
/usr/sap/LBD/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
my startdb.log file
Mon Nov 22 16:33:23 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start LBD database ...
Mon Nov 22 16:33:23 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/LBD/102_64<
ORACLE_SID is >LBD<
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
checking V2 connect
"startdb.log" 77 lines, 2315 characters
Mon Nov 22 16:33:23 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start LBD database ...
Mon Nov 22 16:33:23 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/LBD/102_64<
ORACLE_SID is >LBD<
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
checking V2 connect
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 22-NOV-2010 16:33:23
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/sap/LBD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = lodhabidev)
(PORT = 1527))) (CONNECT_DATA = (SID = LBD) (GLOBAL_NAME = LBD.WORLD)))
OK (30 msec)
tnsping: V2 connect to LBD
Mon Nov 22 16:33:23 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
R3trans: connect check finished with return code: 12
Database not available
Mon Nov 22 16:33:28 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Nov 22 16:33:53 IST 2010
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 22 16:33:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1526726656 bytes
Fixed Size 2021064 bytes
Variable Size 771754296 bytes
Database Buffers 738197504 bytes
Redo Buffers 14753792 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Nov 22 16:35:07 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/LBD/SYS/exe/run/startdb: Terminating with error code 12
~
~
~
~
~
~
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 22 16:33:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1526726656 bytes
Fixed Size 2021064 bytes
Variable Size 771754296 bytes
Database Buffers 738197504 bytes
Redo Buffers 14753792 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Nov 22 16:35:07 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/LBD/SYS/exe/run/startdb: Terminating with error code 12
my trans.log file
ETW000 [dev trc ,00000] Rolling back transaction ... 38 0.261052
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0x11100fb98,usrhp=0x110ffc360)
4 ETW000 208 0.261260
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 531 0.261791
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 56 0.261847
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBa
tch
4 ETW000 51 0.261898
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110ff4580 0x11100c9f8 0x111
00c2a8
4 ETW000 52 0.261950
4 ETW000 [dev trc ,00000] Assigning username to user session 0x110ffc360 28 0.261978
4 ETW000 [dev trc ,00000] Assigning password to user session 0x110ffc360 36 0.262014
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8,usrhp=0x110ffc360)
4 ETW000 63 0.262077
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=28000
4 ETW000 3892 0.265969
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x11100fdb8)
4 ETW000 46 0.266015
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8)
4 ETW000 61 0.266076
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x11100fdb8 358 0.266434
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '28000'
4 ETW000 73 0.266507
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 28000 40 0.266547
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 28000 performing CON [dblink#5 @ 431]
4 ETW000 220 0.266767
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-28000: the account is locked [dblink#5 @ 431]
4 ETW000 69 0.266836
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'LBD'"
here i checked my TNSListener is running
please check why it is not starting
Regardshi sunil
please find below trans.log file
vi trans.log
"trans.log" 97 lines, 9755 characters
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.11.2010 - 18:07:14
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Nov 22 18:07:14 2010
100 0.000100
4 ETW000 [dev trc ,00000] db_con_init called
28 0.000128
4 ETW000 [dev trc ,00000] create_con (con_name=R/3)
54 0.000182
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/LBD/SYS/exe/run/dbo
raslib.o' ...
4 ETW000
70 0.000252
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/LBD/SYS/exe/run/db
oraslib.o), hdl 0
4 ETW000
14694 0.014946
"trans.log" 97 lines, 9755 characters
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.11.2010 - 18:07:14
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Nov 22 18:07:14 2010 100 0.000100
4 ETW000 [dev trc ,00000] db_con_init called 28 0.000128
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 54 0.000182
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' ...
4 ETW000 70 0.000252
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/LBD/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000 14694 0.014946
4 ETW000 [dev trc ,00000] Library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' loaded
4 ETW000 45 0.014991
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000 49 0.015040
4 ETW000 [dev trc ,00000] Version of '/usr/sap/LBD/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.144)
4 ETW000 1087 0.016127
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000 49 0.016176
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000 302 0.016478
4 ETW000 [dev trc ,00000] New connection 0 created 155 0.016633
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 57 0.016690
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 56 0.016746
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 45 0.016791
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.016844
4 ETW000 [dev trc ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/LBD/SYS/exe/run:/oracle/client/10x_64/instantclient from e
nvironment
4 ETW000 531 0.017375
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 332 0.017707
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 30 0.017737
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 8192 0.025929
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 43 0.025972
4 ETW000 [dev trc ,00000] Connecting as /@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 43 0.025972
4 ETW000 [dev trc ,00000] Connecting as /@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 48 0.026020
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBa
tch
4 ETW000 50 0.026070
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110ff4580 0x11100c9f8 0x111
00c2a8
4 ETW000 62 0.026132
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 38 0.026170
4 ETW000 [dev trc ,00000] Allocating server context handle 30 0.026200
4 ETW000 [dev trc ,00000] Attaching to DB Server LBD (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8)
4 ETW000 87 0.026287
4 ETW000 [dev trc ,00000] Assigning server context 0x11100fdb8 to service context 0x11100fb98
4 ETW000 109025 0.135312
4 ETW000 [dev trc ,00000] Allocating user session handle 166 0.135478
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8,usrhp=0x110ffc360)
4 ETW000 60 0.135538
4 ETW000 [dev trc ,00000] Assigning user session 0x110ffc360 to service context 0x11100fb98
4 ETW000 32455 0.167993
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE (:A0, :A1); END;
4 ETW000 192 0.168185
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO (:A0); END;
4 ETW000 111 0.168296
4 ETW000 [dev trc ,00000] Now '/@LBD' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 1135 0.169431
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 62 0.169493
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 465 0.169958
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 962 0.170920
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 39 0.170959
4 ETW000 [dev trc ,00000] Rolling back transaction ... 37 0.170996
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0x11100fb98,usrhp=0x110ffc360)
4 ETW000 205 0.171201
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 549 0.171750
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 57 0.171807
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 57 0.171807
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBa
tch
4 ETW000 52 0.171859
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110ff4580 0x11100c9f8 0x111
00c2a8
4 ETW000 51 0.171910
4 ETW000 [dev trc ,00000] Assigning username to user session 0x110ffc360 29 0.171939
4 ETW000 [dev trc ,00000] Assigning password to user session 0x110ffc360 35 0.171974
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8,usrhp=0x110ffc360)
4 ETW000 65 0.172039
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=28000
4 ETW000 3869 0.175908
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x11100fdb8)
4 ETW000 47 0.175955
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8)
4 ETW000 47 0.176002
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x11100fdb8 357 0.176359
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '28000'
4 ETW000 72 0.176431
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 28000 39 0.176470
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 28000 performing CON [dblink#5 @ 431]
4 ETW000 218 0.176688
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-28000: the account is locked [dblink#5 @ 431]
4 ETW000 67 0.176755
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'LBD'"
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.11.2010 - 18:07:14
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Nov 22 18:07:14 2010 100 0.000100
4 ETW000 [dev trc ,00000] db_con_init called 28 0.000128
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 54 0.000182
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' ...
4 ETW000 70 0.000252
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/LBD/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000 14694 0.014946
4 ETW000 [dev trc ,00000] Library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' loaded
4 ETW000 45 0.014991
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000 49 0.015040
4 ETW000 [dev trc ,00000] Version of '/usr/sap/LBD/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.144)
4 ETW000 1087 0.016127
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000 49 0.016176
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000 302 0.016478
4 ETW000 [dev trc ,00000] New connection 0 created 155 0.016633
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 57 0.016690
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 56 0.016746
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 45 0.016791
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.016844
4 ETW000 [dev trc ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/LBD/SYS/exe/run:/oracle/client/10x_64/instantclient from e
nvironment
4 ETW000 531 0.017375
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 332 0.017707
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 30 0.017737
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 8192 0.025929
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 43 0.025972
4 ETW000 [dev trc ,00000] Connecting as /@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407) -
getting an error message while trying to backup my IPhone 4 that says i will lose all content if i continue. error message is (-5000). what does this mean and how do i fix the problem?
Well, when you click on "update" and it goes partway through and then says it can't continue that does look somewhat error-like to me. :-). I did do a synch when I first plugged the iPad into my desktop, but had to upgrade iTunes and reboot before upgrading the iPad OS, so everything should be backed up. I hope! I don't know how to check on whether things like my appointments or files that I have created get saved in a synch. Selecting each of my pictures and emailing them to myself is an option, I guess.
I am new to the apple world and the thought of losing six month's worth of stuff is intimidating. If only I knew which things would get lost, I'd be able to work with it.
Thanks! -
Getting an error in WebUtil while opening a custom form in EBS
I am trying to use Webutil in Oracle EBS Release 12.1.3. I have configured all the following options:
1. Downloaded frmwebutil.jar and jacob.jar and copied those files in $ORACLE_HOME/forms/java
2. Downloaded jacob.dll and copied this file in $ORACLE_HOME/forms/webutil
3. Did the following configuration in webutil.cfg
install.syslib.location=http://pksundev.uead.uep.com.pk:8030/OA_JAVA/oracle/apps/fnd/jar
# Change size and version if necessary, like when upgrading the library.
# Normally this would not be required since most of these libraries come with
# install itself.
#install.syslib.0.7.1=jacob.dll|94208|1.0|true
#install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
#install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
install.syslib.0.7.1=jacob.dll|106496|1.10.1|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
#NOTE: By default the file transfer is disabled as a security measure
#transfer.database.enabled=FALSE
#transfer.appsrv.enabled=FALSE
#transfer.appsrv.workAreaRoot=
#transfer.appsrv.accessControl=TRUE
#List transfer.appsrv.read.<n> directories
#transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
#transfer.appsrv.write.1=c:\temp
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=
transfer.appsrv.accessControl=TRUE
#List transfer.appsrv.read.<n> directories
transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
transfer.appsrv.write.1=c:\temp
4. Did the following configuration in forms_web_1012_cfg.tmp under $FND_TOP/admin/template/custom
;[apps]
; Customization webutil config
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
archive_jini=frmall_jinit.jar
archive=frmall.jar, frmwebutil.jar, jacob.jar
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
5. Renamed appsbase.htm to appsbaseCustom.htm and added my own configuration and added webutil configuration:
else if (isIE == true) {
var IEhtml = xHTMLpreApplet;
var IEhtmlWebutil = xHTMLpreApplet;
//IEhtml += '<OBJECT classid="' + xpluginclsid + '"';
if (xappletMode == "nonforms")
{ IEhtml += ' name="' + xappletName + '"';
IEhtml += ' width=' + xuiw + ' height=' + xuih ;
IEhtmlWebutil += ' name="' + xappletName + '"';
IEhtmlWebutil += ' width=1 height=1' ;
else { IEhtml += ' width=558 height=120';
IEhtmlWebutil += ' width=1 height=1';
if(xplugin == "jdk"){
IEhtml += ' codebase="' + xpluginurl + '">';
IEhtml += '<' + 'PARAM name=legacy_lifecycle value="' + xsunpluginlifecycle +
'">';
IEhtmlWebutil += ' codebase="' + xpluginurl + '">';
IEhtmlWebutil += '<' + 'PARAM name=legacy_lifecycle value="' + xsunpluginlifec
ycle + '">';
if(xplugin == "jinit"){
IEhtml += ' codebase="' + xpluginurl + xjiname + '#' + xjivername + '">';
IEhtml += '<' + 'PARAM name=jinit_appletcache value="' + xjiappcache + '">';
IEhtmlWebutil += ' codebase="' + xpluginurl + xjiname + '#' + xjivername +
'">';
IEhtmlWebutil += '<' + 'PARAM name=jinit_appletcache value="' + xjiappcache +
'">';
IEhtmlWebutil += '<' + 'PARAM name=type value="' + xpluginmimetype + '"
';IEhtmlWebutil += '<' + 'PARAM name=codebase value="' + xcodebase + '">';
IEhtmlWebutil += '<' + 'PARAM name=code value="oracle.forms.webutil.commo
n.RegisterWebUtil">';
IEhtmlWebutil += '<' + 'PARAM name=archive value="' + xwebutiljarfile + '">
writeJInitBeginTag(xpluginclsid,IEhtmlWebutil);
writeJInitEndTag();
// Separate the less-than character from PARAM to prevent Appletviewer
// from seeing these as param tags outside of an applet tag.
IEhtml += '<' + 'PARAM name=type value="' + xpluginmimetype + '">';
IEhtml += '<' + 'PARAM name=codebase value="' + xcodebase + '">';
IEhtml += '<' + 'PARAM name=code value="' + xcode + '">';
if (xjarloading == "all") {
IEhtml += '<' + 'PARAM name=archive value="' + xmacarchive + '">';
} else if (xjarloading == "core") {
IEhtml += '<' + 'PARAM name=archive value="' + xcorejarfile + '">';
} else if (xappletMode == "nonforms") {
IEhtml += '<' + 'PARAM name=archive value="' + xajarfile + '">';
} else {
IEhtml += '<' + 'PARAM name=archive value="' + xarchive + '">';
IEhtml += '<' + 'PARAM name=separateFrame value="' + xuisf + '">';
IEhtml += '<' + 'PARAM name=WebUtilLogging value="' + xWebUtilLogging +
'">';
IEhtml += '<' + 'PARAM name=WebUtilLoggingDetail value="' + xWebUtilLoggingDe
tail + '">';
IEhtml += '<' + 'PARAM name=WebUtilErrorMode value="' + xWebUtilErrorMode
+ '">';
IEhtml += '<' + 'PARAM name=WebUtilDispatchMonitorInterval value="' + xWebUtil
DispatchMonitorInterval + '">';
IEhtml += '<' + 'PARAM name=WebUtilTrustInternal value="' + xWebUtilTrustInte
rnal + '">';
IEhtml += '<' + 'PARAM name=WebUtilMaxTransferSize value="' + xWebUtilMaxTransf
erSize + '">';
// End Customer Webutil Deploy
6. Finally ran Autoconfig.
After all the above configuration when I tried to run the form that is using webutil feature , I got the following error:
oracle.forms.webutil.fileTransfer bean not found. WEBUTIL_FILE_TRANSFER.getMatTransfer will not work.
oralce.forms.webutil.host.HostBean not found WEBUTIL_HOST.execute will not work.
Kindly let me know why I am getting this error and which setup am I missing.
Regardshi
You have tried to confirm a negative activity or to cancel a confirmation.
This results in a negative total confirmed quantity for this activity.
Procedure
Check the total confirmed activity.
Enter a different quantity for the activity or cancel other confirmations.
you need to enter the quanity
-ashok -
Getting An error has occured while processing Report error
Ok so I know that the
An error has occured while processing Report The query processor ran out of internal resources and could not produce a query plan.
has been discussed a million times, but I have a problem that I think might be new. I can not change the query that is in use. I need to be able to force SQL to use as much memory as it needs to generate the execution plan and run the query regardless of
impact on performance. Is there any way to do this.
I am running SQL2008R2.
I know that the best thing to do is rewrite the query or to break it into smaller parts but I can not do anything with the current query.
Thanks for any help with this.Have you tried running the query in SSMS?
Check this blog
http://mssqlwiki.com/tag/the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan-this-is-a-rare-event-and-only-expected-for-extremely-complex-queries-or-queries-that-reference-a-very-large-numbe/
In the end it also mentions few kb articles which are known issues for this error. Check those as well.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Getting an error "bad parameter" while saving
Hi,
I am trying to open a particular pdf in IE9 browser from my application and trying to save PDF file to my computer. I observed that Save option is disabled for that PDF file in IE9 browser. When I try to save the same file using Ctrl+Alt+S option, I am getting an error "bad parameter". I am not getting any further details on this issue. I am able to save same PDF in IE8 and mozilla browsers. Can you please help me in solving this issue.
Please find below my environment details.
Os: Windows 7
Browser: IE9
Adobe Reader Version: 11.0.03.
PDF template is created using Adobe PDF Creater 11.0.03.Two things I would try:
update to Reader 11.0.5
try saving the PDF without opening it in Adobe Reader (right-click on link, then Save target as...) -
I keep getting the message "error 8003", while trying to download a pre-purshased TV show from iTunes. What does it mean? What should I do?
Help!Have you tried exiting iTunes and restarting? The times I've seen this error this has worked. After restarting iTunes the program asks me to sign into my account and then the downloads begin.
Maybe you are looking for
-
I am trying to open Olympus raw files in CS4 and it keeps telling me that it is the wrong type of file. I have downloaded and installed DNG converter and the PS updater and STILL the program won't open Oly raw files (Tells me it's the wrong kind of
-
my neices ipod touch was given to a 3 year old and the incorect pin code was entered to many times it now says on the screen ipod disabled try again in 22,653,384 minutes which is like 45 years please help as to what i can do to undo this as we can u
-
User exits for delivery note vl02
i want to add some field in delivery note at item level susch as no of package per item for this which user exits i use
-
I live in a rural area and have Satellite internet. That means Data caps. But, I have 5 hours of unlimited each night. 12:00am-5:00. Is there a software program or way to schedule my downloads from iTunes? I can usually manage my software updates, bu
-
Display mode for Account assignment category for NB document type
Dear MM gurus, Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible? Thanks in advance.