I am getting an error to record
i have downloaded AU CC - i am now getting an input errord for mic and speakers for some reason. i am using line in for a high end mic and just the normal computer output for speaker sound. it worked fine when i was using AU 3.0 - now i am getting this record error and i CANNOT do anything.
As others have said, we need much fuller details, particularly of your audio hardware and signal routing.
A couple of general comments:
A "high end" mic plugged into a Line Input will never work. Mic level is around 40 or 50dB lower than line level--and that's before we even start to think about phantom power which you may well need. I have to assume you have some other gear in the circuit if it used to work with AA3.0.
Second, just in general terms, the set up for your audio inputs is on Edit/Preferences/Audio Hardware Setup. Trouble is, to be more specific about settings we need to know more about your hardware and set up.
Similar Messages
-
When Syncing with Desktop I get a error message "Record with Specified fffffeoa not found
I can sync with my desktop using my Playbook but will not sync with my 9700 bold and receive this error message.
You're most likely gonna have to backup, then erase your phone, as described here:
http://support.apple.com/kb/ht5014
If Orange has informed you your request has been processed, this should do the trick. -
Hi,
I am trying to open JRockit recorded xml file with JRA tool. Getting message ' Error parsing recording file'.
Thanks
rangaFor older versions of JRockit, you had to use exactly the same version of JRockit when you created the recording as when you opened it.
With more recent versions (R26.0 and later iirc) it is sufficient if the JRA reader version is >= the version of JRockit producing the recording. Or in other words, make sure you are running the latest version of JRockit on your developer workstation.
-- Henrik -
Intellisync error "Duplicate records found"
I am trying to sync my BB 8300 with Outlook 2007. I am using Blackberry Desk Manager 4.2.2.14.
I was able to sync before but now it get this error "Duplicate records found in the device" and it won't sync.
Any ideas to fix this problem?
I tried to un-install and re-install DM.
I also tried to delete Intellisync folder
Thanks!JJKD wrote:
I am trying to sync my BB 8300 with Outlook 2007. I am using Blackberry Desk Manager 4.2.2.14.
I was able to sync before but now it get this error "Duplicate records found in the device" and it won't sync.
Any ideas to fix this problem?
I tried to un-install and re-install DM.
I also tried to delete Intellisync folder
Thanks!
Hi JJKD;
What is your email application?
Backup your device.
Review the BB KB Here...
There are a couple of approaches to this. If your not needing to complete a two way sync, you can clear the calendar on the BB Handheld by going to BACKUP / ADVANCED and clearing the calendar on right side of the Advanced GUI. Then just try a regular sync.
This can also work by clearing
If you do need to complete a two way sync you can BACKUP the device and clear the Calendar (edit), then RESTORE just the the calendar in BACKUP / ADVANCED by menu'ing the backup you created and complete a restore of the calendar. By backing up and then clearing and then restoring, this will clear any issues with the calendar DB and reindex the data. Then try a regular sync and see if the symptom is taken care of.
Good luck and let us know how your doing...
Message Edited by hmeister on 10-10-2008 09:48 PM
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister -
ESS: Error in record worktime
Hi,
I am getting following error in record worktime iview of ESS.
can you please help e resolving this:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: The profile in use has 65 columns. A maximum of 40 columns are allowed
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.setMessages(FcCatRecordInterface.java:1713)
at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.setMessages(FcCatRecordInterface.java:1661)
at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.onInit(FcCatRecordInterface.java:452)
at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface.onInit(InternalFcCatRecordInterface.java:234)
at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface$External.onInit(InternalFcCatRecordInterface.java:484)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendar.onInit(VcCatCalendar.java:251)
at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendar.onInit(InternalVcCatCalendar.java:194)
at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendarInterface.onInit(VcCatCalendarInterface.java:162)
at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface.onInit(InternalVcCatCalendarInterface.java:146)
at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface$External.onInit(InternalVcCatCalendarInterface.java:222)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
Thanks
AnkurHi ankur,
please check the data entry profile in use.
In SAP there is a limitation of showing max of 40 columns only.
go to t.code cac2 and check the columns showing for the data entry profile and ensure the correct profile is added to the user using CVR parameter in user profile in ECC system.
This should solve the issue.
Hope this helps.
Cheers-
Pramod -
For some reason, I cannot watch a video I recorded on my iPhone. I can see the first frame of it in the gallery, but when I click on it, I get the error that the requested URL could not be found on this server. Why would that display, if the file is on my iPhone? I'm not using iCloud to back up photos,, but I do have Photo Streaming enabled. Is there any way to get to this video? I don;t want to lose it, as it was a priceless moment.
Ok, then as long as the videos reside on your PC, do the following:
1) In iTunes on your PC, unsync the music videos (On the Music tab, uncheck "Include Music Videos, and then sync your iPad).
2) Sync the music videos back to the iPad (check that same box again and sync once more).
Does this fix it? -
Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro XHello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen -
Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?
Read this
http://support.apple.com/kb/ts1583 -
I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregonmikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR -
I'm getting this error:Recording engine: Media is busy, usually by an unmou
Help. I've never gotten this before. I tried to burn too big of a project, but now I get this message for even the smallest project.
I have tried other iMovie projects. Now I'm receiving "Burning is finished. There were errors. Recording engine: media is busy; probably an unmountable volume" on every iMovie file and Quicktime file that I try.
-
Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanksskim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I get an error about the registry settig when I try and launch Tunes. Also when I try to burn a playlist, it says "no recorder found"
This may help:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Also try the driver section of:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Always get an error when trying to record an action
I record the steps in an action, but when I try to run it, I get an error dialog with the following message: Check the actionʼs properties and try running the workflow again. What does this mean?
Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Getting error when record type is used
Hi Experts,
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
IS
TYPE emp_record IS RECORD
(empno emp.empno%TYPE,
ename emp.ename%TYPE,
sal emp.sal%TYPE);
TYPE emp_type is TABLE OF emp_record INDEX BY binary_integer;
PROCEDURE EMP_PROC;
PROCEDURE sal_update_PROC
( p_rule in emp_type
, p_deptno in number
, p_job in number
END;
CREATE OR REPLACE PACKAGE BODY emp_details_proc
IS
PROCEDURE EMP_PROC
IS
V_DEPTNO NUMBER := 10;
V_JOB VARCHAR2(20):='CLERK';
BEGIN
for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
loop
sal_update_PROC
( p_rule => rc
, p_deptno => V_DEPTNO
, p_job =>V_JOB
end loop;
EXCEPTION
WHEN OTHERS THEN
DBMS_output.put_line(SQLERRM);
END;
PROCEDURE sal_update_PROC
( p_rule in emp_type
, p_deptno in number
, p_job in number
IS
V_ename VARCHAR2(20);
V_SAL NUMBER;
BEGIN
V_ename := p_rule.ename;
V_sal := p_rule.sal;
IF V_sal <=3000 THEN
UPDATE EMP SET sal=sal+v_sal*10 WHERE ename=v_ename;
commit;
END IF;
dbms_output.put_line(v_ename||' '||v_sal);
END;
END;
Instead of this
SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno;
PROCEDURE sal_update_PROC
( p_rule in emp_type
, p_deptno in number
, p_job in number
If I use
SELECT * FROM emp where deptno =v_deptno
PROCEDURE sal_update_PROC
( p_rule in emp%ROWTYPE
, p_deptno in number
, p_job in number
I am not getting any error.
Please help me.Why I am getting error what is wrong in my code.
Thanks in advance.for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
loop
sal_update_PROC
( p_rule => rc
, p_deptno => V_DEPTNO
, p_job =>V_JOB
p_rule => rc --> What exactly in rc? It's just a counter. You are using this (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)query but not using a single value returned from this query in the code.
Ishan -
I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC
I am getting this error whenever I try to play its file type on my MacBook Pro,"The document “VN622195.WMA” could not be opened. The movie's file format isn't recognized."The mac has no native way to read .wma files (these are Windows Media Audio files). Do a search on the internet for playing wma files on a mac. You will find several links to solution (one is to use flip4mac).
Maybe you are looking for
-
What remote controls will work with the iMac 27inch.
Okay I hung the new iMac on the wall in my kitchen. Used the apple adapter I have a little apple remote control that works the dvd player fine. Of course the wireless keyboard and the wireless mouse work fine. I have an elgato tuner because this iMac
-
How do you zoom a e-mail. I hit the zoom option in the tool bar but it just shrinks my window. Some e-mails I get have really small text. Is there a way to make it bigger?
-
Hai all How can a j2me application withstand multiple key press while doing some process. Please help me with some ideas Thanks Jinesh
-
Disabling auto-restore for .doc files in Pages
Perhaps the most infuriating feature of Lion is the auto-restore feature that assumes you want to open previous documents every time you use the app (a bewildering assumption). So fine, I go into the system preferences and uncheck "Restore windows wh
-
All I get now is a full month of history.