I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please!
I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please
You can try going through this troubleshooting document
iPod nano: Error message saying that iPod 'could not be identified properly' - Apple Support
Similar Messages
-
Getting an error when i am execution a BI query using ABAP.
Hi Expert,
I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
Property Data Integrity has been set differently to the system default.
Current setting: 0 for GHRGPDM12
System default: u2019 7 u2018
As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
when i am debugging , I am getting error from
create instance of cl_rsr_request
CREATE OBJECT r_request
EXPORTING
i_genuniid = p_genuniid.
this FM. Its not able to create the object. Can any one please help me out.
Thanks in advance.
Regards
SatrajitHi,
I am able to solve this problem
Regards
Satrajit -
"An ipod has been detected, but it could not be identified properly. Please disconnect an reconnect the iPod, then try again. An unknown error occured (2005)."
What does this mean? I have an iPod shuffle 4th gen but its not detected in itunes... it can only be seen in the device manager, but I can't see it on the task bar. Can anyone please help me?I have same error except that i get it even when my phone is not connected.
-
In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.I have same error except that i get it even when my phone is not connected.
-
Ipod could not be identified properly - HELP!
Whenever I connect my Ipod, I get the following message on itunes:
An iPod has been detected, but it could not be identified properly.
Please disconnect and reconnect the iPod, then try again.
I have tried that, restarting the computer, repairing itunes, removing and reinstalling itunes, and restarting the iPod service.
Help, somebody, please?
Email is [email protected]
Help me here or email me, please.
<Edited by Moderator>Rats!
Well close iTunes, and tell me what drive letter the iPod shows up as in Windows.
Maybe changing the drive letter to something else would help. Way further down in the alphabet, like Q or W.
Directions for changing drive letters in Windows are here
http://docs.info.apple.com/article.html?artnum=93499 -
I have uninstalled and reinstalled itunes and I am still getting this error message. An iPod has been detected, but it could not be identified properly. Please disonnect and reconnect the iPod, then try again.
Hey there gentzdo,
Welcome to Apple Support Communities.
This article provides information and troubleshooting tips that'll resolve most issues like the one that you've described, where your iPod nano isn't identified properly by iTunes.
iPod nano: Error message saying that iPod could not be identified properly - Apple Support
Cheers,
-Jason -
why can't I restore and it says software update server could not be contacted? Help Please
Most likely because the phone was jailbroken or hacked to unlock it.
-
Help, just got a new hard drive installed and now my videos in iPhoto say, "a necessary data reference could not be found"
Not sure what happened but I was able to click on the movie, go to File then Reveal in Finder, then drag it to my desktop and then drag it back into iPhoto and it worked.
-
I am gettting the error message:
itunes the procedure entry point ?videotracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0a@VCrashonoverf low@2@@***@@xz could not be located in the dynamic link Library C:\Program files (86x)\Common Files\Apple\Apple Application Support\Webkit.dll.
After I get this error iTunes will not open, and does not respond
I have't been able to find any info on this can anyone help?Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99827) -
The project could not be prepared for publishing because an error occurred. (-50)
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
i have FF 23.0.1, when i close the browser [Press the X on the top right] i get the error: "The instruction at ..... referenced memory at ...... The memory could not be written"
I have windows XP.
The issue occurs only when closing the browser, does not happen when opening it.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Ssuddenly I am not getting my audio notifications when email arrivs into my inbox on my Ipad. I have tried turning up the volume, .. Changing my sound choice..... NNothing!! The volume button on my Ipad works for other thing, You Tube, etc, but just not my email??? HELP PLEASE !! Xx
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Make sure Side Switch is set to "Lock Rotation" and make sure sound is not muted in Control Center (little bell)
http://i1224.photobucket.com/albums/ee374/Diavonex/ac7f6dc314aca5d618ac2f55616be 20e_zpsa92a3ebd.jpg -
When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened. The information store could not be opened'.
I cannot set any calendar events for my shared calendar. Can ayone help?If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).
-
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
TS3716 pop up saying "Apple Mobile Device Service is not started" can anyone help please?
My i-phone was connecting to itunes, the installed Tune Up Utilities 2013 and ran, this it's posibly tuned off the sync, unsure.
But when i connect now the pop up come up any answers?I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.
Maybe you are looking for
-
Save As button missing in Adobe Reader X
Is there anyway to add the Save As button to the tool bar?
-
PDF SCANS ERROR MESSAGE: CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF
OFFICEJET PRO 8600 PLUS , WIN 7, SCAN TO COMPUTER AS A PDF FILE. ERROR MESSAGE: " CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF
-
Interacting with email in inbox takes me to CRM_IC/BuPaDetailB2b
I've defined specific controller substitutues in config. One of them is to call Z_CRM_IC/BuPaDetailB2b2 instead CRM_IC/BuPaDetailB2b2, however when I search in my inbox for emails. Select one and hit interact, the view that's display is the CRM_IC/
-
Retrieving a copy of my iphone 3g purchase receipt
I would like to retrieve a copy of my iphone 3g purchase receipt and there is no easy way to contact Apple's service that address the issue above. I'm from israel and would like to contact Apple's service via email or by chat service (which is prefer
-
I have set up a Smart Camera (NI-1772) in an grading system which is used to measure and count product fed passed the camera by a conveyor system. The prodcut is sized by length, (by the camera ) and a PLC actuates mechanism that put the product in