I am getting an error when I try to publish that says "Can't create the file "Mod_footer_bg.jpg."  How do I fix this?

I was previously getting the droppedimage.png error, but I deleted all of my PNG's and I looked up how to fix that one.  The problem is that now I am getting a "Mod_footer_bg.jpg" error when I attempt to publish my site (both the the FTP Server as well as to a local folder).  I checked out the HTML using cyberduck, and I see that the Mod_footer_bg.jpg's are the footers of each of my pages.  I went through all of my pages and made the "footer height" zero.  This did not work, so what do I need to do to fix this?  Thanks!

I can offer a shotgun effect fix but don't know if any a definite fix for this. Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
reboot.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Similar Messages

  • HELP I keep getting an error message on my IPHONE 4 that says Unable to connect to Cellular Data. How do I fix this?

    HELP I keep getting an error message on my IPHONE 4 that says Unable to connect to Cellular Data and I have tried to reset network settings and factory reset but nothing helping so far. Took it to Verizon and they couldn't fix it either, said it's a problem with the phone itself and to contact Apple. My warranty is expired so Apple isn't much help either. How do I fix this? I have a data package so confused and I have had my phone for over a year but never had this issue before.

    I am getting this message also.... mine cant update too...

  • Publish error iweb Can't create the file "Mod_footer_bg.jpg."

    Hi everyone,
    I need some help. I've imported slideshow widgets to my iweb and it's giving me the following PUBLISH ERROR:
    "Can’t create the file “Mod_footer_bg.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges."
    Can anyone help with this? Thanks a million!

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • When I try to download all my info like notes and contacts onto a new iphone an error appears saying that it is incompatible or the backup was corrup, how do I fix this?

    When I try to download all my info like notes and contacts onto a new iphone an error appears saying that it is incompatible or the backup was corrup, how do I fix this?

    Which is it?  Is "it" incompatible or is the backup corrupt?
    What specifically are you attempting and what specifically is occurring?

  • TS2167 i'm getting an error message.. can't create the file "header.jpg." The disk may be damaged or full, or you may not have suuficient access priveleges.

    I need to publish to a local folder on my desk top and I am getting this error message.
    can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
    Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • I'm getting a Publish Error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

    I'm getting a publishing error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.
    Does anyone know how to proceed?
    Thanks!

    Try the troubleshooting steps under "FIx iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    Some times all it takes is deleting the .plist to fix this but do the restart and permissions repair if you haven't done this proceedure for a while.

  • Help, used ipod will lock up mitunes when I try to add songs from library will stop after 20-30- songs How do I fix this?

    Help, used ipod will lock up mitunes when I try to add songs from library will stop after 20-30- songs How do I fix this?

    Need more info to be of any assistance
    Which version of iTunes are you using?
    What is the iPod Software version as shown in the iTunes summary page?
    Which model of iPod classic are you using?

  • When I open Firefox, the browser does not open. Instead I get a small window that says: TypeError: Components.classes[cid] is undefined. How do I fix this?

    I tried to uninstall AVG antiviral software, but it did not uninstall. Next, when I try to open Firefox I get a box popup that says:
    TypeError: Components.classes[cid] is undefined.
    If I click OK in that box, I can then open Firefox.
    Also I can no longer update Java.
    Help!

    Possibly you have "AVG Safe search" extension installed as part of "AVG Free", solution involves reinstalling :AVG Free" without the Link Scanner component see
    * http://kb.mozillazine.org/Problematic_extensions
    * symptom was noted in https://support.mozilla.com/questions/865877
    Other possibilities
    * "OneClick YouTube Downloader 1.07" as reported in
    *: https://support.mozilla.com/questions/864343
    * "Java console" needs to be updated as reported in
    *:https://support.mozilla.com/questions/863711]
    * "HP Smart Print 1.0" as reported in
    *: https://support.mozilla.com/questions/857283
    * "McAfee Site Advisor" as noted in (also see Problematic extensions above)
    *:https://support.mozilla.com/questions/802381
    *a theme After switching to the default theme the JavaScript error doesn't appear. (View > Page Style > No Style or if "Firefox" button use "Alt" first to get to the View menu)
    *:https://support.mozilla.com/questions/837840
    *various extensions/applications but is 1 year back and Firefox 3.6.6
    *:https://support.mozilla.com/questions/729606
    If none of the above solve you problem use diagnostic approach...
    *: https://support.mozilla.com/questions/837840

  • I accidentally deleted all the files inside Quicktime, and now when I try to import to iMovie it won't let me...how do I fix this?

    How do I get them back? It's from the Quicktime that already came with my Mac...please help me...It won't let me import movies to iMovie!!

    What installer software package files? Could you tell me how to get there?
    Afraid I'm not a mind reader. You have to download the installer packages from whatever source provides those installer packages. For instance, you would download the DivX installer package file from DivX. The Perian codec installer package would found at the Perian web site. QT "Pro" codec components installers may be include with older Motion or FCP Suite software or from the Apple site, etc., etc., etc. At this point all I know for sure is that that you have part of the DivX package installed and should reinstall the entire package if you plan to use it for anything.
    Everyone's codec component configuration may be different depending on what codecs the need to use. Perhaps it would be easier if I provide an image showing the codec components installed on my Snow Leopard configured laptop:
    This is a very basic set-up since I do most of my video work on my iMac which has FCP installed on it. In this case you can see:
    a) AC3MovieImport.component (Apple)
    b) AppleIntermediaCodec.component (Apple)
    c) AppleMPEG2Codec.component (Apple)
    d) Elgato Turbo.component (Elgato)
    e) EyeTV MPEG Support.component (Elgato)
    f) Flip4Mac WMV Advanced.component (Telestream)
    g) Flip4Mac WMV Export.component (Telestream)
    h) Flip4Mac WMV Import.component (Telestream)
    i) Perian.component (Perian)
    j) x264Encoder.component (MacUpdate)
    The first three codecs were installed by my System Installer w/iMovie package (i.e., pre-installed on system when purchased or added afterwards by iMovie). The Elgato codec installers came with with my Turbo H.264 and EyeTV hardware devices. (I you don't have such devices, then you don't needcan't use these codecs.) The WMV codecs were purchased from Telestream. The Perian codec was a free download from the Perian web site and is used for DivX, XviD, 3ivX, DTS, AC3, MKV, FLV, and other audio/video/file type support. (I.e., I don't use the DivX package.) The X.264 codec is a leftover from my old Leopard system and not really used much anymore since I now prefer using HandBrake GUI for most X.264 custom encodes.
    At this point, would assume you need to rerun the Snow Leopard/iMovie Installer if you purchased the system with system pre-installed or purchased the it as a system upgrade. Another alternative would be to find another Snow Leopard OS platform and simply copy the missing Apple iMovie codecs from a working system to your non-working system. All other codecs are up to you. Only you know what third-party codecs were installed on your system. And if you don't remember, you will probably find out what you are missing every time you try to play a video containing an unsupported codec.
    Since you seem to be very inexperienced here, you may wish to consider joining a local user group or seeking some one-on-one assistance from someone in your local area.

  • When I try to FaceTime someone it days FaceTime failed or blank is unavailable how do I fix this

    So I put in my friend vincents email and he put mine in but I cannot call him because it days either FaceTime failed call back or Vincent is unavailable. This happens when I FaceTime other people too. Also Vincent was able to call me but when the accept or decline screen comes up it disappears in a second! Tell me how to fix this!

    On the other devices go to Settings>FaceTime>You can be reached at and uncheck/delete email address/phone number  and add email address/phone number as appropriate.
    Bot that an iPod/iPad will only have a phone number if the same ID is used for Messages on both devices.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

  • My Mac will not let me install any software I download. In some cases (Like quicktime) i get a message that says "Can't create the folder" I have it with adobe air and its creating all sorts of issues. My software is up to date and I have 10.8.2.

    A whole bunch of issues here.
    I can't install any software. It started when iPlayer stopped working at all.  This led me to try to update software versions such as Adobe Air to 3.5 (Failed) then quicktime player 7.6.6 as recommended (Failed) then the printer packed up and I have tried to install the downloaded software drivers for Canon from the Apple site (Failed again) 
    In all cases they let me download so I have the file, but not install.
    Quicktime tells me it can't install a file "/var/folders/15....then a long string of numbers....ending in T//install.1347YKihUc".
    The Canon Print Driver has a very similar message.
    Adobe Air says "An error occurred whilst installing....contact my administrator" which is me and I am fine with it ;-)
    Remember this all started because my iPlayer (and my printer) just stopped working and I have been trying to fix those.
    I am a bit techy but not much.
    Can anyone assist?
    Many Thanks.
    Fozzie65

    I have Firefox 3.6.6, and now that Firefox 4.0 is available, it crashes constantly. Sometimes less than 5 minutes after I open it. I have a Mac 10.4.11, so Firefox 4.0 isn't an option for me. When I asked Ff to check my plug-ins it said there was an error and to check back later. Twice.
    Because I didn't have any (any) problems with my Ff before the upgrade became available, I am forced to question if Ff has done something to make the earlier version crash so you'll upgrade, but I can't afford to upgrade my Mac right now.
    In the meantime, I do need a browser that works! I dislike Safari, Chrome is also not available on Mac 10.4.11, and Explorer is just plain not available on Mac.
    Do you have any suggestions on how to fix my Firefox 3.6.6?
    Ty

  • An error comes up saying "The file is damaged" how do i fix this

    So I wanted to download adobe fireworks Cs6 and I had to download adobe downloading assistant, I started the download but it didn't work, Instead an error came up saying "This file is damaged" How can i fix this error or stop this? Please help!

    i used a direct link, Look at the problem. It says that i put my adobe dreamweaver cs6 to desktop, the other one says "A problem occured while extracting some files, Check available space on your computer and write down privileges on the destination folder."  

  • When i try to publish my changes it gives me a msg saying "can't create the file "feed.xml" The disk may be damaged or full or you may not have sufficient access privileges" Not sure why its saying that or how to fix it

    Any help would be greatly appreciated! Thanks!

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • I downloaded a movie with apple TV, but I get an error when I try and play.

    I downloaded a movie with apple TV but I get an error when I try and play

    And that erors is.....

  • Publish error : Can't create the file "Typesetter Header3.jpg."

    when i publish my website an error message comes up and says Can’t create the file “Typesetter Header3.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
    anyone have any idea?

    Welcome to the discussions. This thread may help:
    http://discussions.apple.com/thread.jspa?threadID=2296031
    ...If re-starting iWeb doesn’t help, this may:
    Go to Finder -> HomeFolder -> Library
    Move entire folder "Caches" to desktop
    Restart iWeb and publish
    It may work now
    You can now delete "Caches" folder in desktop.

Maybe you are looking for