I am getting an error while coding between CS5 and Flash CC specifically: Access of undefined property instrument_txt. I am using a book that is made for CS5. Is there a current book or resources for Actionscript 3.0 and Flash CC?

Scene 1, Layer 'actions', Frame 1, Line 47, Column 2
1120: Access of undefined property instrument_txt.
this is my problem. any ideas. thanks

I did try this and nothing happened, same error codes. The code works fine from CS5 and CS6 Flash versions. The animation runs well, the text displays where it should in the instrument_txt frame. It is when I try this in Flash CC that it creates the code error. here was an error that came up regarding text problems, something with FLT text converted to another text (I am not sure of the name of the text-type and the "FLT" I am not sure of either).
thanks

Similar Messages

Error Code 1120 access of undefined property...help please

I am fairly new to Flash - I have CS4 and am not sure if I am in the right place to get help.
I am trying to build a click through gallery with small buttons that you click on and it switches the larger image out as you click through.
I copied over a gallery I had successfully built with 10 images. The new gallery has 20 images.
Basically the movie just runs continuously without being able to click on the thumbnails.
I am getting the following compiler errors
Scene1 Layer 'actions', Frame 1, Line 42 1120:Access of undefined property btn11_btn Source - btn11_btn.addEventListener(MouseEvent.CLICK, showimage11);
I get this for image 11 through 20
The following is my code
stop();
btn1_btn.addEventListener(MouseEvent.MOUSE_OVER, showimage1);
function showimage1(event:MouseEvent):void {
gotoAndPlay("label1");
btn2_btn.addEventListener(MouseEvent.CLICK, showimage2);
function showimage2(event:MouseEvent):void {
gotoAndPlay("label2");
btn3_btn.addEventListener(MouseEvent.CLICK, showimage3);
function showimage3(event:MouseEvent):void {
gotoAndPlay("label3");
btn4_btn.addEventListener(MouseEvent.CLICK, showimage4);
function showimage4(event:MouseEvent):void {
gotoAndPlay("label4");
btn5_btn.addEventListener(MouseEvent.CLICK, showimage5);
function showimage5(event:MouseEvent):void {
gotoAndPlay("label5");
btn6_btn.addEventListener(MouseEvent.CLICK, showimage6);
function showimage6(event:MouseEvent):void {
gotoAndPlay("label6");
btn7_btn.addEventListener(MouseEvent.CLICK, showimage7);
function showimage7(event:MouseEvent):void {
gotoAndPlay("label7");
btn8_btn.addEventListener(MouseEvent.CLICK, showimage8);
function showimage8(event:MouseEvent):void {
gotoAndPlay("label8");
btn9_btn.addEventListener(MouseEvent.CLICK, showimage9);
function showimage9(event:MouseEvent):void {
gotoAndPlay("label9");
btn10_btn.addEventListener(MouseEvent.CLICK, showimage10);
function showimage10(event:MouseEvent):void {
gotoAndPlay("label10");
btn11_btn.addEventListener(MouseEvent.CLICK, showimage11);
function showimage11(event:MouseEvent):void {
gotoAndPlay("label11");
btn12_btn.addEventListener(MouseEvent.CLICK, showimage12);
function showimage12(event:MouseEvent):void {
gotoAndPlay("label12");
btn13_btn.addEventListener(MouseEvent.CLICK, showimage13);
function showimage13(event:MouseEvent):void {
gotoAndPlay("label31");
btn14_btn.addEventListener(MouseEvent.CLICK, showimage14);
function showimage14(event:MouseEvent):void {
gotoAndPlay("label14");
btn15_btn.addEventListener(MouseEvent.CLICK, showimage15);
function showimage15(event:MouseEvent):void {
gotoAndPlay("label15");
btn16_btn.addEventListener(MouseEvent.CLICK, showimage16);
function showimage16(event:MouseEvent):void {
gotoAndPlay("label16");
btn17_btn.addEventListener(MouseEvent.CLICK, showimage17);
function showimage17(event:MouseEvent):void {
gotoAndPlay("label17");
btn18_btn.addEventListener(MouseEvent.CLICK, showimage18);
function showimage18(event:MouseEvent):void {
gotoAndPlay("label18");
btn19_btn.addEventListener(MouseEvent.CLICK, showimage19);
function showimage19(event:MouseEvent):void {
gotoAndPlay("label19");
btn20_btn.addEventListener(MouseEvent.CLICK, showimage20);
function showimage20(event:MouseEvent):void {
gotoAndPlay("label20");
Any advice would be great
I dont know if I have to start from scratch - which would be a pain for sure
Thanks

I feel foolish - I solved my own problem!
I figured out that I had not given buttons 11 - 20 an instance name
Once I did that - voila problem solved
Sorry for bothering you all.

Need help with error msg 1120: Access of undefined property

I am not a coder, so I need coding help. Any help would be greatly appreciated.
I'm doing a Flash banner that has clickTAG instructions from Google. The code they said to put on the button is:
ClickTAG parameter code for ActionScript 3:
import flash.events.MouseEvent;
import flash.net.URLRequest;
someButton_or_displayObject_to_receive_mouseClick.addEventListener(
      MouseEvent.CLICK,
      function(event: MouseEvent) : void {
      flash.net.navigateToURL(new URLRequest( root.loaderInfo.parameters.clickTAG), "_blank");
Replace someButton_or_displayObject_to_receive_mouseClick with the actual name of button that will receive the click.
Note that it's not necessary to specify the destination URL for the ad anywhere in this code; this is taken care of through the usage of clickTAG. Also, depending on the structure of your Flash ad, it may be necessary to prepend "_root." or "_level0." to "clickTAG" above, resulting in "_root.clickTAG" or "_level0.clickTAG". It is strongly recommended to upload the ad into your account and verify that the ad is behaving normally prior to it going live, allowing time for any necessary changes.
And this is the code I put in (btnClickTag is the name of my button):
import flash.events.MouseEvent;
import flash.net.URLRequest;
btnClickTag.addEventListener(
      MouseEvent.CLICK,
      function(event: MouseEvent) : void {
      flash.net.navigateToURL(new URLRequest( root.loaderInfo.parameters.clickTAG), "_blank");
and this is the error I got:
Scene1, Layer 'actions', Frame 1, 1120: Access of undefined property btnClickTag. btnClickTag.addEventListener(

First, make sure you have assigned that name to the button via the properties panel, then, be sure to adjust the code so that it is not spread out over several lines... normally it needs to be on one line. You should not nest the function in the event listener either, so try the following (no need for the import statements)...
btnClickTag.addEventListener(MouseEvent.CLICK, tagClick);
function tagClick(event:MouseEvent):void {
      navigateToURL(new URLRequest( root.loaderInfo.parameters.clickTAG), "_blank");

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Im using firefox 4.0.1 and Idm 6.05, I get an error while i click download button.

Im using firefox 4.0.1 and Idm 6.05, I get an error while i click download button.
ERROR Displyed is : "cannot connect to dl120.duckload.com:80" and "permission denied. check your Firewall settings and ensure IDM has permits to access internet"
But i have disabled Windows firewall and i dont have Antivirus.. Plz help me...
For more plz see tis screen shot : [http://img845.imageshack.us/img845/5234/idmerr1.png link text]

See if the "stable" version released on 30 June is compatible with Firefox 5.0. That page doesn't mention which versions of Firefox it is compatible with, a serious oversight, IMO. <br />
https://www.torproject.org/torbutton/
Plus, it looks like that developer hasn't updated his AMO page in over a year, which makes it impossible for users of that add-on to get automatic updates as each new version of Firefox is released. <br />
https://addons.mozilla.org/en-US/firefox/addon/torbutton/

HT4009 Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice

Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice

http://support.apple.com/kb/HT1311

I am getting a error while executing the Web Dynpro Application Page.

Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
    The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_WDR_CLIENT_APPLICATION=====CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
    Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika

>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

Getting "SAPSQL_ARRAY_INSERT_DUPREC" error while creating a new layout

Hi,
I deleted a layout from a level. When I tried to create a new layout with the same technical name, I was getting a run time error.
Name of the error : SAPSQL_ARRAY_INSERT_DUPREC
Exception : CX_SY_OPEN_SQL_DB
I went to ST22 and analyzed the dump. I found that the entries for the layout that I deleted were still present in the following 2 tables:
1) UPP_PARAMT
2) UPP_ELEMT
My questions are:
1) Is there any possibilities that I can retrive the layout that I deleted with the help of the entries present in the above tables?
2) Can I remove the entries from these two tables so that I can create a new layout with the same technical name?
Thanks,
Seetharaman V

Hi Matt
Thanks for your comments. I was getting this error while trying to save the new layout i created and not during the creatiion.
Thanks,
Seetha

Getting Connection error while creating Substituion Rule in UWL

Hi Everybody,
Getting below error while creating Substitution Rules in UWL.
"error for the u201Cconnectionu201D to SAP_R3_Finance ".
Can be able to see all Work Items belongs to me. getting the errror while creating Substitution Rule only..
Could anybody tell me what might be the Reason what steps i need to take to resolve this issue.
Thanks,
Naveen Kumar

Hi Uds,
are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
If so try creating the repository file specifying a directory on the Linux server.
For example to:
/tmp/sample_repository
So Choose 'File' from drop down menu
Enter /tmp/sample_repository
Click on create button
This should create the file called sample_repository in /tmp on the Linux server.
Can you tell us what your environment is?
Regards Cel

Getting an error while adding the user in Sharepoint foundation 2010 environment.

Hi,
I am having full control access to SharePoint site. Then i tried add user for that site.
But i am getting following error while adding the user to the site.
An unexpected error has occurred.
Troubleshoot issues with microsoft SharePoint Foundation.
Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
Can you please help me anyone on this.
Thanks,
Ashok

This could be any one of a number of things. You need to lookup the Correlation ID in the ULS logs on the SharePoint server. That should provide the additional information necessary to diagnose and solve the problem. Here's a blog post
on how to find the error.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Getting an Error while installing Microsoft Visual Studio 2013

Hi team
I am getting an error while installing Microsoft Visual Studio 2013
PFB error : this version of visual studio requires a computer with a never version of windows
P.S. I am having Windows 7 64 bit processor , van you please advise ASAP

Hi Kanchan Gandhi,
A similar issue is addressed here, hope it’s helpful.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/127869c4-7e00-450d-b7fc-1b3cd11ebf07/this-version-of-visual-studio-requires-a-computer-with-a-newer-version-of-windows?forum=vssetup
This is system requirement of Visual Studio 2013:
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Getting an error while copying pdf file into RMS enabled document library using copyTo() method

In SharePoint 2010, I am trying to copy pdf file programmatically from a non-RMS protected document library into RMS protected library using copyTo() method.
But I am getting an error while doing so. it gives error as mentioned below -
This library does not accept files of the given type. You must either upload a
new, unprotected file that supports rights management or re-upload a document
that was previously downloaded from this library.
Please suggest some solution.
Thanks,

Are You sure that you have give 'PDF' in caps in your program? and check whether you are getting all the datas before calling the method.
in my program, i have used like this and it is working fine for me,
I am getting PDF content from the form...
DATA ls_formoutput     TYPE fpformoutput.
DATA pdf_content        TYPE solix_tab.
DATA lp_pdf_size        TYPE so_obj_len.
DATA lv_mail_title      TYPE so_obj_des.
*Attach the PDF .
      lp_pdf_size = XSTRLEN( ls_formoutput-pdf ).
      pdf_content = cl_document_bcs=>xstring_to_solix(
          ip_xstring = ls_formoutput-pdf ).
      document->add_attachment(
        i_attachment_type     = 'PDF'
        i_att_content_hex     = pdf_content
        i_attachment_size     = lp_pdf_size
        i_attachment_subject = lv_mail_title ) .

I keep getting an error while trying to reinstall itunes?

I am trying to reinstall itunes and i am having an issue. I keep getting an error while trying to install and I keep getting very far but I always seem to end up with this.
"Could not open key
UNKNOWN\Components\DA42BC89BF25F5BD0AF…
\b25099274a207264182f8181add555d0.
Verify that you have sufficient access to that key, or contact your support personnel"
I was attempting to reinstall due to an error message appearing when I opened itunes
"Itunes requires a newer version of Apple Mobile Device Support Please uninstall
both Apple Mobile Device Support and iTunes, then install iTunes again."
I have tried a few solutions and for the first error when installing one was an attempt at editing a registry file which I do not think succeeded because I am running windows 8 and was being directed for windows 7.

"Could not open key
UNKNOWN\Components\DA42BC89BF25F5BD0AF…
\b25099274a207264182f8181add555d0.
Doublechecking. Have you tried the following user tip?
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Getting an error while creating a ERP Quotation from CRM Sales Web-UI.

Hi Experts,
I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here I am enclosing the screen shot. Please give me the solution for this.Thank you in advance.
Regards
Kishor Kumar.

Hi Kishore,
Please refer to the link below -
Entry of ERP Sales Documents in SAP CRM - Sales Quotation and Order Management - SAP Library
Also, refer to the SAP note -
1446253 - FAQ note: ERP documents in the CRM Web UI (lead-to-cash scenario)
This note will give you the related topic and the configuration required through SAP help links.
Hope this will be useful.
Thanks and Regards
DJ

I am getting an error while coding between CS5 and Flash CC specifically: Access of undefined property instrument_txt. I am using a book that is made for CS5. Is there a current book or resources for Actionscript 3.0 and Flash CC?

Similar Messages

Maybe you are looking for