I am getting charged again and again once I logout from AppStore on my iPhone...
I am first time using iPhone for business purpose and wondering why I am getting charged again and again, if I logout from AppStore. Last time, I had reset my phone setting and system logged me out. When I tried to download an app, system prompted me to verify my userid and card details. Nowhere, it has been said why this charges has been imposed. It's really stupid. Please help.. TIA!
Message was edited by: negi2u
You need to notice there is another poster here that has a complaint. When I respond to you, it shows it under my response. The troubleshooting response was for the other poster. I gave you information to contact iTunes. You should not be charged for anything as I said earlier unless the app you are downloading has a cost. Once you pay once, you do not pay again. Contact iTunes if your credit card is being charged. You do not mention that you have seen any charges on your account, just that it has asked you for your payment information more than once. Just asking for the information does not automatically charge you. PLEASE, go to the link that I gave you to contact iTunes.
Similar Messages
-
i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME
Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
ALE Change pointer BDCPS table gets processed again and again
Hello,
In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
We did client copy for building Test system from DEV (Gold client).
Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
Is there any way to get rid of it? Will BD22 help?
Thanks.
Rupali.>
Rupali K wrote:
> Hello,
>
> In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
> We did client copy for building Test system from DEV (Gold client).
>
> Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
>
> Is there any way to get rid of it? Will BD22 help?
>
> Thanks.
> Rupali.
Hi Rupali.
BD22 is used for erase change pointers. Why don't use WPMU ? or WPMA ? Using transaction WPMU, this
take change pointers, and mark it like processed. I'm using WPMU, and it's working.
Regards. -
hey i have forgotten iphone screen lock passcode and i have tried again and again so my iphone gets disabled . 1 and 23 hrs gone but it is still disabled . So please tell me what to do??? plzzz
recovery mode
open itunes on computer
plug cable into computer not phone
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4? I had the Hardcore mix and a rap mix and classic rock and grunge mixes...now I don't...I kinda want those back...the mixes I have now make no sense as most the songs on each do not correlate AT ALL to the genre mix they have been placed in. If someone could give me an answer that'd be great.
1. Don't confuse "Apple ID" with iTunes Account ID. You can have many Apple IDs but only one iTunes account active at a time.
2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
3. You can't merge the accounts - they remain separate. Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME and visa versa.
4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to. -
how i can create apple ID. i tried my best but get failed, bec it asking for Payment method again and again
If you don't want to give payment details then there are instructions on this page for how to create one (the instructions don't work for existing accounts) : http://support.apple.com/kb/HT2534 i.e. select a free app in the store and click on 'Create Apple ID' when 'buying' it
-
I have a wi fi network in my house it has been working fine with no problems at all. I can afirm that because my iPhone connects as soon as I get home. But my Mac sometimes it will connect without any problems but sometimes it will require me to input the user name and password again and again.
Please help!!I have a wi fi network in my house it has been working fine with no problems at all. I can afirm that because my iPhone connects as soon as I get home. But my Mac sometimes it will connect without any problems but sometimes it will require me to input the user name and password again and again.
Please help!! -
when i connect my ipad2 64 gb to power its getting restarted again and again any one have any solutions???
You only need to post one time.
-
please give this awsome app more by providing features::
1. thumbnails for pages ,
2. ability to annotaions( highlighter and underliner) to remain enabled once selected ( because many times it becomes hectic to select again and again the same annotaion when selecting multiple words in a single page).
thanks .. hope this will be soon adapted withplease give this awsome app more by providing features::
1. thumbnails for pages ,
2. ability to annotaions( highlighter and underliner) to remain enabled once selected ( because many times it becomes hectic to select again and again the same annotaion when selecting multiple words in a single page).
thanks .. hope this will be soon adapted with -
When I want to syncronize my photo's from my computer to my Ipad, I get the message "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
When I did so, the same message appears again and again.
Anyone knows the solution?
Thanks on forhand.Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
I am loading 0material_attr, getting error again and again
Hi Guru's
I am loading 0material_attr, getting error again and again as mentioned below:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
please anybody help me in this regard.Hi Manna,
goto the path Environment -> Transact. RFC -> Source System as mentioned in the error. It will ask for source system ID & password. Enter & login. check if anything is struck over there. If so, execute it manually or press F6.
You can also check SM58 trans for tRFC in BW system. If it is in Red, execute it manually.
You can also refer the below thread:
Missing data packages for PSA Table (BI 7.0 2004s)
Hope it helps & resolves your issue!
Regards,
Pavan
Edited by: PavanRaj_S on Jan 17, 2011 5:05 PM -
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
Thanks
Talat KhatriTry the following steps,
Sign into your computer and removal of credit card information. Here are the steps:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
Reset your account password from the following link:
http://iforgot.apple.com
Phase 3:
Download a free content on to get recognized in iTunes.
To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
After you are able to download the free App try updating the billing information as usual. -
I dont know what happened, i get charged from my father visa credit card. I play Ragnarok Valkyrie Uprising game which can buy shop item(name ruby). First time i tried to purchasing 210 rubies it cost 189 In Rupiah(Indonesian currency) but it was failed and showing dialog box unable to purchase ruby. So I tried again and again bought rubies with different values (10 rubies,50 rubies,210 rubies) but that unable to purchase dialog box always appears. I though the purchasing rubies transaction was failed. Then i was trying to find whats wrong and get some information from the internet all day until i calling my credit card (Citibank/visa) technical support, he said i was already did some transaction for this. i ever did rubies transaction before and it was completely working. Please help. wheres my money gone? wheres my 210 rubies? I even cant check my billing information and purchased history cause my credit card is declined by itunes cause over limit. Pls give me respon to solve this.
Hello Ading,
It sounds like you were charged for an in App purchase but did not receive the item. I would report this issue to iTunes Store support with the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Thank you for using Apple Support Communities.
Regards,
Sterling -
Freezing Mac OS again and again, even when copying files
Ich arbeite viel mit 3D und meinen Fotos, Aperture und Poser 2014 Pro.
Erst dachte ich das es an den Anwendungen liegt, jedoch kam ein Update und eine kurze Verbesserung. Nur noch zwei mal am Tag neu booten über den Ein/Aus Schalter - versteht sich. Da die Maus und die Tastatur kein Ausschalten möglich war.
Nun werden die zeiten in den sich der Computer mit was auch immer beschäftigt, wieder häuiger. Den Bildschirmschoner und die Energiespar funktion habe ich schon seit ewigen Zeiten nicht mehr aktiv.
Da das aufwachen des Compters auch immer wieder Probleme bereitete.
Wenn ich keine Besserung mit 10.9.4 erhalte, spiele ich mit dem Gedanken, mit ein downgrade an zu tun, auf 10.8.x Da ich mit der Stabilität sehr unzufrieden bin. Ich besitze einen iMac 27" late 2013 mit Fussion Drive 1T. Daneben steht mein alter iMac late 2009, 27" mit 1TB HDD und iOS 10.7.5 der seit Tagen ohne Probleme läuft und mit dem ich in letzter Zeit doch mehr arbeite.
Ich habe immer wieder die bedenken, das unter umständen tagelange arbeite verloren gehen können. wie dieses Wochenende, das wieder einmal eine neu installation nötig war.
Wie sieht es aus, wann wird iOS 10.9.x stabil laufen ?
Oder Raten sie mit doch zu einem "Downgrade auf 10.8.x ?
Nun ist der nächte reboot nötig, da iOS nicht mehr weiss was es zu tun hat !
In English:
I work a lot with 3D and my photos, Aperture and Poser Pro 2014.
At first I thought that it is up to the applications, however, came an update and a brief improvement. Only two times a day to reboot via the on / off switch - of course. As the mouse and the keyboard was no turning is possible.
Now the times are in the computer with whatever is concerned, again häuiger. The screen saver and power save function I have been around forever no longer active.
Since the wake of compters also repeatedly caused problems.
If I get no improvement with 10.9.4, I play with the idea to do with a downgrade to, on 10.8.x I am very unhappy with the stability. I have an iMac 27 "late 2013 Fussion Drive 1T. Next to it is my old iMac late 2009 27" with 1TB HDD and iOS 10.7.5 running without problems for days and with whom I still work more lately.
I have the mind again and again, which can get lost for days work under some circumstances. as this weekend, which was a new installation once again needed.
How it looks, when will iOS running 10.9.x stable?
Or rate them with but a "downgrade to 10.8.x?
Best regards,
HorstHave you tried resetting the SMC? Please follow the directions below closely, if it doesn't work the first time do it a second time. If that still doesn't handle the issue then contact AppleCare (I'm assuming the machine is covered by AppleCare) so they can begin troubleshooting it.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Maybe you are looking for
-
I need to merge my apple id's or remove an email's association with it.
My dad and I have been using the same iTunes account for years as I was too young to have one of my own. Now that I am 18 and old enough to have my own card my dad wants to give me control of our iTunes account because I was the one who purchased all
-
i found a ipad but i tried unloking it but it has the find my iphone app and i tried to find the owner but nothing happend so what can i do?
-
Agent Inbox Resp. Group results
Hello Experts, In the Agent Inbox, when applying the responsible group filter (my group / identified department), the results still return all results instead of filtered results. Any assistance would be appreciated. Thank you, Tanya
-
This has probably been asked before but when I create a drop shadow around an object in Adobe Indesign CS3 it looks fine in the program but when I export to PDF I get like a square of discoloured white surrounding the effect. I'm not sure if this wou
-
ARCHIV_CREATE_DIALOG_META FM not working from apllication server?
Hi everyone, So, earlier I upload photos from my desktop and it worked. But now I have to upload photos from application server, so but ARCHIV_CREATE_DIALOG_META didn't upload the JPG file. file = ' /server/Photos/HRDEV/picture.jpg' . CALL FUNCTION '