I am getting "dns server not responding"

I am staying in a hotel and my 3gs iphones keep getting "dns server not responding" my computers work fine in my room. My iphones don't but if I walk out in the hallway the iphones work fine. Help?

Found what was the problem on my configuration.
Since NLB VIP did not respond when traffic was going from other networks (Internet included) i had to reconfigure NLB from unicast to multicast. Then thing started to work but i had DNS resolution error.
Solution:
A BUG! When you change NLB cluster type, ipv6 that is configured on it gets removed so you have to enter it again. That's the same IPV6 IP under Infrastructure servers - DNS that ends with :3333::1 for your .domain.local

Similar Messages

Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

DNS server not responding on HP Pavilionp7-1012 desktop

When online I`m constantly having to refresh web connection, sometimes it works ,sometimes not. Only message I get is Dns server not reponding. ISP techs are worthless.

Hi
Please find the links given below might help you to fix your issue.
Video Link
Web Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

DNS server not responding

Hi!
I've been having problems lately about my network. I cannot find any connections on my computer, and I have to use an ethernet cable to connect and use the WiFi. The trouble shooter told me to plug the ethernet cable in and try if it works, but later on
it tells me that my computer is configurated correctly and the device or dns server isnt responding.
Now i have searched up some things, and to fix the dns server response you have to type ncap.cpl and click on the wifi connection. After that you go to properties and enter in the dns address code.(208.67.222.222)
Can anyone help me?The Problem is,
i can only see the ethernet connection section.If i plug my ethernet cable out of my computer I cant connect to anything, and I dont know how to fix this and connect to my wireless wifi.
Can anyone help me? PLEASE I AM DESPERATE THANK YOU

hi Mr.
Park
Are
you able to fix the issues. Do you need any assistance ?

Direct Access: DNS error on Operations Status (DNS server not responding)

Hi!
I am testing Direct Access on Windows 2012 R2 Standard. So far I have deployed the Remote Access role to our server "ABC-DA1". I have completed the configuration wizard for a Single NIC deployment and defined a FQDN as the "public name"
(da.domain.com).
After completing the wizard I go to the the Operations Status page and find the an error telling me one of the DNS servers is unavailable. The mentioned server is no longer operational as it was running on an old Win2k8R2 DC server that was demoted.
Is there a way to remove the reference to the old server? I have 3 new DNS servers running on the new Domain Controllers but it seems like the old DC did not completely remove itself.
Below is a screenshot of the operations status.
Thank you for your help :)

Hi,
Please go to the Name Resolution Policy and check if you can change the DNS server there.
Computer Configuration -> Policies -> Windows Settings -> Name Resolution Policy
Hope this helps.
Jeremy Wu
TechNet Community Support

DNS server not available/not responding

Hi,
I have 6-7 windows 7 system 2 of them system getting error while access anything
not always 2-3 time within a days.
DNS server not available
DNS server not responding
Please help me
Thanks,
Madhukar

Hello,
please post an unedited ipconfig /all from the problem machine and the DC/DNS server they use on the NIC.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

With 3g, I keep getting "server not responding" on my iPad2...what do I do?

at home, where I do not have WIFI, I have been unsuccessful for the last day to get an internet connection via 3G. Getting emails is not a problem, but when I try to access the internet, all I get is "server not responding".....do I contact ATT or is there something else I can try? This problem appeared out of the blue.

If you have a very slow 3 g signal, or worse, a signal so bad that it falls back to 2 g or edge, many servers will time out before you can get the data. There are some apps that will let you test your connection speed, such as speed test.
If you are in a real congested area, or wayyyy out in the sticks, this may be the problem. A good way to test is to goto a known good signal area, like a starbucks, join their wifi, and see if the pages work. Then leave the wifi, but in a known good 3 g area, see if the it is better.

I cannot access my email on i-pad or i-pod, get pop-up mail server not responding I have a problem with computer internrt

I cannot access my email on i-pad or i-pod keep getting message server not responding although I am connected

You need to go to options and switch back to classic

Ipad server not responding

I was restoring my Ipad and allI get is Ipad server not responending the Ipad is stuck in recovery mode?

I started having the same problem when I was in PA. I was connected then one night just stopped right in my hands while I was browsing. I checked the settings and was connected. I thought maybe something was wrong with internet where I was. Waited until I got home, says I'm connected but still getting Safari Server not responding. I've tried all the fixes that seemed to work for everyone else. No luck with my iPad.

"server not responding" error msg on my ipad

I'm getting a "server not responding" error msg but my internet connection is strong. My itunes, netflix, tv apps, safari....all not working - but facebook is?

Hello there, Swass26.
The following Knowledge Base article provides some great in-depth troubleshooting steps to get to the bottom of your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Server not responding mini iPad safari

Server not responding when touching the safari network

I started having the same problem when I was in PA. I was connected then one night just stopped right in my hands while I was browsing. I checked the settings and was connected. I thought maybe something was wrong with internet where I was. Waited until I got home, says I'm connected but still getting Safari Server not responding. I've tried all the fixes that seemed to work for everyone else. No luck with my iPad.

When emailing from iPhoto I keep on getting 'server not responded' message.

Would anyone be able to help with the issue I have with iPhoto. Every time I try to email photos directly from iPhoto I get this message 'server not responded'. I have the lates Mountain Lion OSX installed on MBA. Also, in addition to iCloud account I tried to add two more email accounts to iPhoto hoping that this might solve the problem, but it didn't. Would anyone have any ideas what I might be doing wrong?
Thank you.

Marius,
set the mailer in the iPhoto Preferences to "Mail.app", not to "iPhoto"
iPhoto > Preferences > General
Email Photos using: Mail
This way you will be able to mail your photos directly from iPhoto, but you cannot use the iPhoto cards; use the Mail Photo stationary instead, once the mail panel opens.
For some reason mailing using iPhoto as Mailer works for me only, if I am mailing from my iCloud accoun,t and if Mail is set to use the iCloud account by default.
Regards
Léonie

Cannot use Safari or any net based apps. Keep getting "server not responding" any ideas?

when trying to use Safari, or any internet based Apps (ie:facebook,youtube) my daughters Ipad gives me a few min wait, then says " unable to connect, server not responding" . At first I thought it was my Wifi.. nope.. everything else in the house connects just fine. Then I thought that maaaybe I needed to re-login onto my wifi from the Ipad... nope.
Any ideas??
Thank you
I am asking about an original Ipad... idk whyit says Ipad2

Even though other devices are connected to wifi, it still could be that you are not connected. Is the wifi icon at the top of the display illuminated.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/

Installer - all day I get Server not responding Error code 207

Trying to install CC Desktop - all day I get Server not responding Error code 207. Is this an internet performance issue or a real issue with the server?

Hi,
Thanks for the suggestion Romit. I believe the reported error code was installer app code rather than Windows error code.
I have now had my broadband installed so have retried this install again, rather than on original public wifi. I'm pleased to say that it has all installed very well. I'm therefore pretty sure that it was an internet performance issue.
Hope this helps anyone in the future.

Linux issue: "server not responding" msgs starting to appear in DreamWeaver MX

I have an Ubuntu Server on my small network that acts (among
other things) as a Web page testing server. I have DreamWeaver set
up to connect to our remote host for putting operations, and the
testing server is our local Linux machine. It worked great, as
testing a page was instantaneous over the LAN.
Then something (I have no idea what, and I'm pretty much a
Linux Noob) changed and now, when we test on server or try the
“test” button on the site configuration menu, we get
ten to fifteen seconds of “Server Not Responding / connecting
to server,” then it connects fine.
The server pings fine and I can connect via an OS (both Mac
and PC) fine. It’s just that we went from instantaneous
connection to an irritating delay. Any idea where I start
diagnosing/fixing this?
Here is a bit of background on the machine. I’m sorry
I’m not sure what’s relevant — if I forgot
something, please let me know, and ignore anything that’s
superfluous.
It recently upgraded to 2.6.24-21. The upgrade went fine, but
I had to reinstall the LAN drivers. The Linbox is assigned an IP
via the router’s (Linksys 310N) DHCP Reservation Table, based
on the Linbox’s MAC address. I don’t believe I’ve
set a static IP on the box (/etc/network/interfaces is generic and
unmodified). I’m using ProFTPD and WebMin, but mostly with
default settings.
Thanks,
Rhythm

Problem solved:
For the use of anyone who someday finds this thread, here is
how things worked out:
I went to the ProFTPD Server module of
[url=http://www.webmin.com/]WebMin[/url], then to Networking
Options. I changed two entries:
Do reverse DNS lookups of client addresses? (From default to
no)
Lookup remote Ident username? (from default to no)
I then restarted ProFTPD and voila, it worked like it did
before!
http://www.proftpd.org/docs/faq/faq_full.html#AEN341

I am getting "dns server not responding"

Similar Messages

Maybe you are looking for