I am getting error 1001 on my ipad 2 while upgrading updates

When click to upgrade updates on my ipad 2 i get error 1001 and says please try again later.

What iOS version is currently on your iPad?
The error number is not included in the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Similar Messages

  • I get error message on my ipad mini OxE800000A it worked okay a little while ago

    I get error message on my ipad mini OxE800000A it worked okay a little while ago

    Try the following document:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

  • I am continually getting error -69 when syncing iPad Air with latest iOS and iTunes versions. Any suggestions?

    I am continually getting error -69 when syncing iPad Air with latest iOS and iTunes versions. Any suggestions?

    Try Googling "sync without iTunes".
    There are free alternatives and there are not so free alternatives.
    Btw, to check if AVG is causing the problem, you should uninstall AVG and not just "turn it off".
    Also, can you describe how you go about uninstalling a program? For example, how did you "delete" iTunes?

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5)

    Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5) I have disabled my security software, but that doesn't help.  Any ideas?

    http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html

  • I am getting error 1156 when syning ipad and error 4002 in iCloud match

    Getting error 1156 when trying to sync my ipad and error 4002 when trying to use icould match how in the **** do you fix it I have tryied everything and even called apple who were no help other than they said they were working on it

    Same

  • Problem updating from Acrobat 10.1.10 to 11. Error 1001, and am told to connect to update server. When I activated the installer, message said Install failed, contact manufacturer for assistance, so I am.

    I am using a 2011 MacBook Pro, running OS X 10.9.5.  Have been using Acrobat 10.1.10, but got a pop-up notice from Adobe today, saying that it had been awhile since last logged on and my software was due for an update. However, after downloading the update Acrobat 11, the updater seems to be unable to FIND the file to update, so it asks me to select the file to update. When I found it, the file icon was grayed out, and wouldn't allow me to select it. Gave me a message for "Error 1001". I'm an experienced Mac user, but not a programmer, so I don't know what that means. When I tried to run the installer from the downloaded file, it stopped, saying "Installation Failed" due to encountering an error—which was NOT named or numbered—and that I should contact the manufacturer for assistance. Which I am ATTEMPTING to do, but it appears to be impossible to actually get direct help.
    Suggestions, or better yet, direct answers, would be appreciated.

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • I keep getting error -1202 when trying to download music or update my billing account.

    Help!  I have installed, uninstalled, and re-installed itunes because I get an unknown error -1202 when trying to buy music or update my billing account.  Any ideas?

    Same error # here  https://discussions.apple.com/thread/1688431?start=0&tstart=0
    If you installed the BubbleWrap app, try restoring the iPhone as a new device.
    How to set up your iPhone, iPad, or iPod touch as a new device

  • TS1702 I keep getting error message number 0x800B010F when I try to update my applications

    Whenever i try to update my iphone applications from the itunes program i get error message 0x800B010F. How do I fix this?

    Hbauer60 wrote:
    ...  How do I get around this?
    You cannot.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I'm in UK but am getting Errors 503, 105007 and 105002 when trying to update

    I'm in UK but am getting Errors 503, 105007 and 105002 when trying to publish updates to 2 websites. System maintenance is going on right now in US and Australia but nothing about Europe. its Sunday 1900 here ( UTC+1)
    I was getting the same errors about 20 hours ago too - surely maintenance in US won't affect Europe and wouldn't prevent publishing for 24 hours?
    Any suggestions =   I guess the Adobe help desk will be SNAFU

    From BC Blog Post:
    Partner registration, Trial site creation Muse Publish, APIs, FTP and some admin section will not be available for 4 hours on all data centers.
    If you see the errors after maintenance is complete contact BC Support.

  • I have my receipt of sale but can get the app on my ipad. The first update cause all kind of problems for me. May I have some help please?

    I have been trying for three months now and still can not get Goodreader back on my ipad. All the suggestions are not working. The last one I tried was to restore my ipad.

    That may be a problem related to network settings on your computer, or on the router that you use for connecting to the Internet.  Take a look at this article for a possible solution
    http://support.apple.com/kb/TS1368
    Since this actually a problem with using iTunes, and not directly related to an iPod (or an iPad), you may also want to ask your question in the appropriate iTunes forum category
    https://discussions.apple.com/community/itunes
    The specific problem is that you cannot connect to the iTunes Store when using the iTunes app, even through your computer has Internet access.

  • HT201210 getting error message cannot restore ipad disk space full ???

    cannot restore the ipad  its locked up and I am getting an error message that says cannot restore ipad disk space full what to do?
    thanks

    Well you are going to have to delete something to make room

  • TS1286 I am getting Error 9 on my iPad.

    I have tried the fixes recommended here and it doen't solve the problem.  Still showing an iTunes logo and USB cable picture.  Anyone got any other ideas.  Have tried updating iTunes software from two different laptops and also have used different USB cables.  Thanks!

    What iOS version is currently on your iPad?
    The error number is not included in the 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Getting Error ORA-01012: not logged on while connecting as sys

    We have just upgraded from Oracle 8.1.7 to Oracle 9.2.0.5. Currently we have 2 databases in oracle 9i - db2 and scen. scen has been newly upgraded to Oracle 9i.
    When I set the ORACLE_SID to scen (as per entry in oratab), and connect to sqlplus using sys / as sysdba, it connects to an idle instance. and displays the error message ORA-01012: not logged on. I do not encounter this when I connect to the other database db2. There should be some settings which have been missed out.
    Could anybody help me out with this....

    I managed to get the settings corrected.Thanks anyway....

  • Getting Error:Failed to open the connection while calling crystal report

    I am getting the below error while calling the crystal report from dot net app. I am using OLEDB to connect to database. It is working perfectly in our DEV environment but as soon as I move it to production information after changing the logon information in the report it start giving the below error.
    Failed to open the connection.C:\WINDOWS\TEMP{C2FD97D9-2ADE-41BB-88FF-23A4DF20BC6F}.rpt
    Details: [Database Vendor Code: 17 ]

    Are you able to connect to the database from the production machine using a UDL file?
    If you haven't tried this, here's how to do it. Take these steps on the machine that is hosting the application. Create a new text file on the desktop. Change the file extension to ".udl" (without the quotes). Double-click on this to bring up the OLEDB connection test: start on the Provider tab and select the appropriate provider. Click "Next" and on the following tab enter your connection information. Click the "Test Connection" button to test the connection. Does it connect  to the database successfully?
    If you click on "OK" to close the dialog and then open the UDL file with Notepad, you should see an OLEDB connection string. In this string should be the same property values for server, database, user id and password which you are providing through your application. If they are not the same, modify your application to use these values.
    If testing your connection information with the UDL file works but your application is still failing when using the same credentials, try profiling or tracing the database. Do you see connection attempts from the application? Are there any errors?
    If you're impersonating, have you set up windows authentication correctly for both the application and the database?

Maybe you are looking for

  • Mobile Applications folder missing

    Hello everyone, I am trying to acces files, which are supposed to be located inside the "Mobile Applications" folder, which should be located at C:\Users\<username>\Music\iTunes\iTunes Media. However, this folder is missing. The only things that are

  • How can I add the crop tool to my Navigation Panel?

    How can I add the crop tool to my Navigation Panel?

  • DNS Server on Solaris 10

    Hi. I'm trying to install DNS in a Solaris 10, But there is some strange and is that the inetd file is so short, and in the rc2.d directory isn't the S72inetsvc that is the file that start | stop -TCP services. I copied that file from another server

  • Tab error in Facebook

    I have a problem which is open with tab delay or after closed tab is still appear and after disappear blank space between two tab is still stay as i was using in facebook.Although it is not always.

  • Java file to dll

    hello i have written program in My eclipse..is it possible to convert the program into dll file if so can anyone help me howw to do it? Thanks