I am getting error "An error ocurred while installing updates (103) when I try to do update for OSX

Whenever I try to update an OSX Update, I get the error message "An error ocurred while installing updates." (103).  Has anyone encountered any such error?

Try each of the following steps.
Step 1
If you're trying to install more than one update, do the updates one at a time.
Step 2
Triple-click anywhere in the line below on this page to select it:  
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password.

Similar Messages

  • Errors occurred while installing updates for  iTunes 11.1.4 on Windows VISTA

    I receive the message "errors occurred while installing updates" for  iTunes 11.1.4 on Windows VISTA.  What is the fix

    Hey applequilt,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may provide a solution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks,
    Matt M.

  • Error occured while installing updates for itunes 10.6.1

    I have been having issues lately trying to install my updates to iTunes.  I keep getting an error message that says "Error occurred while installing the updates.  If the problem persists, choose Tools > Download Only and try installing manually."  This happened on the last update as well, and the install manually didn't work.  I eventually had to uninstall iTunes and reinstall the latest version.  But, if I keep doing this, I have to re-add all of my music folders, and recreate all of my playlists for every single update that comes out.  That means like once a week.  Does anyone know why I keep getting this message?
    I have submitted a screenshot if that helps.
    Also, I am running windows 7 on my computer.  Thank you

    Hmmm. I was wondering if it was an issue with a broken setupadmin.exe mucking up the works (because it's a tiny little file). But it's apparently the itunes64.msi causing us grief.
    Plausibly, we might be looking at a disk/file damage thing that is preventing the msis and so forth from saving correctly. If so, running a disk check (chkdsk) over your C:\ Drive might help.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Attempted to install new version of itunes and now getting errors occurred while install updates. runtime error program: c:\program files (x86) an application has made an attempt to load the c runtime library incorrectly. please contact the applications

    attempted to install newest version of itunes and now get 'runtime error' program: c:\program files (x86) r6034

    Hey Debbiered1,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so are particularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • Have a first gen ipad. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools download only and try installing manually"

    Have a first gen iPad with 4.3 IOS. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools>download only and try installing manually". This is as far as I can get. Can't find tools to manually download. When I try to reset to factory settings, I get an error also.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I cannot update my iTunes with"error occurred while installing updates"

    Ever since I updated my Windows Vista Laptop to Service Pack 2, iTunes has not been able to update with the a popup with "error occurred while installing updates. If the problems persist choose Tools > Download Only". And i DID have to Reinstall iTunes from scratch, so please help me. I really want to get rid of this problem thats been bothering me for 2 years
    Thanks

    I've got it to work. If that's the same error you received, then I have to assume you're using Windows 64-bit (as all the people I found with the same problem do). This was what worked for me, courtesy of Shiggity from sevenforums.com -
    Go to "C:\ProgramData\Microsoft\Windows\Start Menu", right-click "Programs" and select "Properties".
    On the Security Tab, Click "Advanced".
    Go to the Owner tab, and Click "Edit".
    Change the owner to yourself, Check "Replace owner on subcontainers and objects", and Click OK.
    And then re-run the installation. Hope that works!

  • Error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

    error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

    Are you able to update if you use an iTunesSetup.exe (or iTunes64Setup.exe) installler file downloaded from the Apple website?
    http://www.apple.com/itunes/download/

  • After upgrading to 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the store

    After upgrading to iTunes 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the Store. How do I fix this?

    I got the solution from another post...
    use the Finder to navigate to /library/preferences/SystemConfiguration and delete NetworkInterfaces.plist ( you will be prompted for username and password), then reboot. You will get a message about new network interface found--just reset the network info.
    That did it for me.

  • HT4718 My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

    My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

    Welcome to Apple Support Communities
    If your Mac has been installing software updates for a long time, Software Update is probably frozen. Hold the Power button until your MacBook Air turns off, and turn it on again. OS X should start up.

  • Getting error while installing update for Windows 10

    Hi,
    I am getting below error message while installing window 10 preview using window update option. Please help me how to address this issue to install window 10 preview
    OS : Windows 7 Enterprise SP1 64 bit
    Upgrade to Windows Technical Preview for Enterprise
    Installation date: ‎10/‎3/‎2014 10:50 PM
    Installation status: Failed
    Error details: Code 80004005
    Update type: Recommended
    Install a preview of the next version of Windows.
    More information: 
    http://go.microsoft.com/fwlink/?LinkID=507415
    Help and Support: 
    http://go.microsoft.com/fwlink/?LinkId=507417
    Regards
    Selva

    Hi Selva,
    Can you download the ISO file from this site?
    Download Windows Technical Preview
    http://technet.microsoft.com/en-us/windows/dn783436
    If so, please download the installer and make a DVD or bootable USB, then try to perform the installation from there.
    Check following things first:
    1.Disconnect any devices connected to the PC.
    2.Disable/uninstall all anti-virus software (be sure to enable/reinstall later)
    3.Install all important updates from Windows Update before updating.
    If you still fail to install Windows, you will find $Windows.~BT under C drive (the system drive), please make sure to show up the Hidden file.
    Then, locate to the $Windows.~BT folder and find \Sources\Panther\setuperr.log and setupact.log, please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
    Kate Li
    TechNet Community Support

  • Errors occurred while installing update

    Has anyone had this error while installing update to itunes?
    The suggestion is to:
    click tools>download only> and try installing manually
    Thanks
    fabiofromwatertown

    I don't if you run Kaspersky or not, but thats what my problem was. I just simply turned off Kaspersky and it downloaded and updated with no problems. Hope this helps!

  • Keep getting error message while instaling software updates

    i just receive my imac from apple store after they fix my HDD , my imac is using version 10.6.8 and have 2.66 GHz intel core i5 prossesor also have memory 12 GB 1067 MHz DDR3 , i had problem before with my imac and i sent it to apple store to fix it , after they fix it ( they said) i wont have any problem anymore with my imac , and when i try it at home, i used migration assistant to get back my old data to my fixed imac, and now everytime i try to update my imac from software update on apple icon, they can downloading the updates but when i click instal and restart my imac can not installing the updates, keep getting error instaling update on my imac.
    anyone can help me with this?

    This is just a guess, and it may not work, but it won't make things worse.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Copy or drag – do not type – the line below into the window, then press return.
    defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
    You can then quit Terminal.

  • Windows vista recovery error CTOERROR.flg and following that error 0x643 while installing update

    Hi All
    system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
    When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
    Last time i got this message too . When i did installing windows from recovery disks few months back, that time  i figured out to install all imp. updates  through  automatic  windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
    But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
     Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows dialog box - windows security update is not installed successfully . I need to install all updates in one go like last time from my understanding.:
    1. So if i install windows update (to try my luck as last time) it shows 0x643 error for .net framework and asks to restart and after that when i try to manually install failed updated 0x643 it asks me to restart the windows for pending updates.
    2. Alternatively, If i try to install failed update first just after recovery failure it won't allow me to install important updates for vista sp1 and asks to restart windows.
    All i need is to successfully update all updates through windows automatic update which is not happening at the moment.
    Not even able to upgrade to sp2 bcz it too restarts for installing.
    Please Help.
    Thanks in advance.

    Hi Mario-L,
    I manually downlaod the update  KB3035034 and tried to install in my preview build 9926, it shows The update is not applicable to your computer". Actually, what shows in my system when I check for updates, it detects update Kb 3037975
    and 3037975 redirects you to 3021953 see description in this link
    http://support.microsoft.com/kb/3021953
    After installing the updates, and view update history, it shows:
    Personally, I have no idea on this issue currently, please submit a report via Windows Feedback App
    Yolanda Zhu
    TechNet Community Support

  • Error 0x800f0922 while installing Update KB3035034

    Hi,
    every time I am trying to install update KB3035034 via Windows Update in settings app, the following error occurs: 0x800f0922. After a reboot and also some days later the error is remaining.
    What can I do to install the update?
    regards,
    Mario

    Hi Mario-L,
    I manually downlaod the update  KB3035034 and tried to install in my preview build 9926, it shows The update is not applicable to your computer". Actually, what shows in my system when I check for updates, it detects update Kb 3037975
    and 3037975 redirects you to 3021953 see description in this link
    http://support.microsoft.com/kb/3021953
    After installing the updates, and view update history, it shows:
    Personally, I have no idea on this issue currently, please submit a report via Windows Feedback App
    Yolanda Zhu
    TechNet Community Support

  • An error ocurred while installing os x - how to stop the upgrade process?

    Hello:
    I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
    How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?

    Hello:
    I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
    How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?

Maybe you are looking for

  • Apple loops sound warblely

    When auditioning apple loops in LP8 from the loop browser I've noticed that some loops sound warblely, as if they are being stretched out too much, even when they are playing at the original tempo. What gives?

  • How can I open a PDF file without first saving the file?

    How can I open a PDF file without first having to save the file?

  • Purchase Orders - One Time Order

    Hello. We are purchasing parts for a 1 time mock up of a product which has about 70 different pieces.  We are not going to keep track of inventory, and wondering if we must enter all these items in Item Master to create a PO? Or is there a way around

  • DataSource Connection Pooling in 903?

    We are having difficulty getting 9iAS DataSource Pooling to work. We are using 9iAS 9.0.3 (without Infrastructure) and, as per the J2EE Services Guide, have : 1) Added... Context ic = new InitialContext(); DataSource ds (DataSource) ic.lookup("jdbc/O

  • Driver SDK: nextResults()

    Folks - I've been playing around a bit with the driver sdk (cooooooool stuff). How exactly is one meant to use the nextResults() method, anyway?  From what I can tell it indicates some sort of ability to retrieve multiple data providers -- is that tr