I am getting error message 2  when trying to open itunes.

Apple mobile device manager failed to upload. Why do you think i am getting this error. I have tried uninstalling and reinstalling several times and the result is the same. HELP PLEASE

Security software issues perhaps, look here for help.
http://support.apple.com/kb/TS3694#error3194

Similar Messages

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • PC crashed. Attempted to install NEW copy of Elements 10 that I had in reserve. Always get ERROR MESSAGE 400 when trying to open the program. Please advise how I get around this error.

    My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit

    if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5

  • Why do I frequently get error message 408 when trying to open a page?

    Recently Firefox has been running slowly and I often get error code 408 (browser did not submit a complete request in time) when I try to open a page. I have tried refreshing Firefox to the recommended settings twice, but this did not help.

    Is this problem with some web pages, many, most?
    Can you post a few links? No Personal Information Please !
    https://support.mozilla.org/en-US/kb/server-not-found-connection-problem
    https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
    https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message

  • Error message (-50) when trying to open iTunes 8

    Has anyone come across this error message when installing iTunes?
    Looks as though install ok - but the app will not open.
    "iTunes could not be opened. An unknown error (-50) occurred."

    Message numbers in the 13000 range are usually do to a problem with Genius. I have seen 2 totally different fixes posted here in the forums. edit - Sounds like you already tried method 1.
    *Method 1*
    Rename these files, or delete them
    iTunes Library Genius.itdb
    iTunes Library Extras.itdb
    Try opening iTunes again. And turn off Genius as fast as you can. You can turn it back on later, but first get iTunes running.
    *Method 2*
    Go to Control Panel > Add/Remove Programs
    Choose iTunes, press the Change button and then the repair button.
    Message was edited by: Katrina S.

  • Keep getting "Error code 600" when trying to open itunes.Lost my tunes??:(

    I left my computer on for a couple of days and had closed down itunes. when i tried to open it back up the " error code 600" came up and i cant get to my music. can anyone help me!

    wmv is a Windows Media format.  I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
    You need
    Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
    After installation a new Flip4Mac pane will appear in System Preferences.  Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
    or play the files with VLC
    VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
    While you're at it you might install:
    Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
    Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
    Perian doen't do WMV but it's handy to get many things to play in Quicktime.
    Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

  • Error message 13005 when trying to open iTunes

    Hi, my iTunes updated over the weekend and now will not open. I get the following error message.
    "The iTunes application could not be opened. An unkown error occurred (13005)."
    Have completly uninstalled iTunes and re installed. Have uninstalled and installed an older version of itunes. Tried moving my Library file to my desktop to re install it (but couldn't open itunes to re install it). Tried deleting all genius files etc.
    Followed every idea I've seen on the forum but to no avail! I run my library on a timecapsule.....saw something about a potential problem with a firm wear update but no solution....
    Anyone got any ideas?
    thanks

    Message numbers in the 13000 range are usually do to a problem with Genius. I have seen 2 totally different fixes posted here in the forums. edit - Sounds like you already tried method 1.
    *Method 1*
    Rename these files, or delete them
    iTunes Library Genius.itdb
    iTunes Library Extras.itdb
    Try opening iTunes again. And turn off Genius as fast as you can. You can turn it back on later, but first get iTunes running.
    *Method 2*
    Go to Control Panel > Add/Remove Programs
    Choose iTunes, press the Change button and then the repair button.
    Message was edited by: Katrina S.

  • New Error Message found when trying to open iTunes 7.3.1!!!!!!!!!!!!!!!!!

    It clearly says, "iTunes cannot run because it has detected a problem with your audio configuration."
    It didn't do this when i had iTunes 7.3. Why now?
    Can someone help me fix this?

    Try this:
    http://docs.info.apple.com/article.html?artnum=304424

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

    Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • HT201210 Getting error message 2003 when trying to resore 3g handset....any help much appreciated...regards Mike

    Hi Hello,
    Getting error message 2003 when trying to restre repaired 3g handset?...any assist greatly appreciated...Kind Regards...Mike.

    Hi there,
    This may be caused by a USB conflict or and issue with your security software. It looks like the article you came from has this information toward the bottom.
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    -Griff W.

  • I am getting error message 3194 when trying to update software.

    I am getting error message 3194 when trying to update software.

    Security software issues perhaps, look here for help.
    http://support.apple.com/kb/TS3694#error3194

  • I keep getting error message U44M1P2003 when trying to update photo shop elements 12

    I keep getting error message U44M1P2003 when trying to update photo shop elements 12 can any one help an OAP Luddite?

    See if that can help:
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements

  • Getting error message (-3150) when trying to set up itunes home share

    getting error message (-3150) when trying to set up itunes home share

    Hey there dahliafromphiladelphia,
    If you're unable to set up Home Sharing in iTunes on your computer, then I'd like you to please follow the directions in the article below.
    Troubleshooting Home Sharing - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Keep getting error message 4310 when trying to burn music onto CD? How can I fix this for free?

    Keep getting error message 4310 when trying to burn music from playlist onto CD. How can I fix this for free?

    You can use the email form here >  Apple - Support - iTunes Store - Contact Us
    iTunes Store & Mac App Store: About your Apple ID and password

Maybe you are looking for

  • HT1175 How can i add a 1TB hard disc to my time capsule with usb?

    I  bought a 2TB time capsule and now I have two questons actialy. First I want to add a 1TB external HD to my TC, second I want to access my data's from another places with any network. These are possible and how can I do these things please help me?

  • Same algorithm in function and procedure then which one will better?

    Why pl sql function is better to computes a value instead of procedure? If I apply same algorithm in function and procedure then which one will perform better?

  • Format Lists

    Please help me. All I want to do is have a Masked input/Update Field. I am creating a simple update form in ASP.NET VB connecting to an Access Database. I seem to be able to choose one of the default format options in the Bindings Panel i.e. Alpha/Ca

  • How to get list of HTML5 features used by a Edge Project

    Hi All, Is there a way for me to know what all features of HTML5 does my Edge project actually use. I know there are a lot of sites which tests what all HTML5 features are supported by a browser, but I want to know which all features are being used b

  • JOIN error

    Can anyone help why sqlplus gives an error for this (and for all SELECTs with JOINS) query? Thanks. SQL> run 1 SELECT 2 G.NOM_GARE, 3 T.VOIE, 4 SUM( DECODE( T.ID_CLASSE, 0, 1, 1, 1, 2, 1, 3, 1, 4, 1, 0 ) ), 5 SUM( DECODE( T.ID_CLASSE, 0, 1, 0 ) ), 6