I am getting JavaScript Errors when I attempt to use the Multiscreen Preview function in DW CS 5.

When I attepmpt to use the Multiscreen Preview button in DW CS 5 I get the following error:
"While executing onShow in MultiscreenPreview.htm, the following JavaScript error(s) occured:
In file "Multiscreen Preview":
onShow is not defined"
This leads to either an unusable multiscreen preview box or another series of similar JavaScript errors.
Is there a solution to this problem and if so what is it?
Thank you for your time.

Follow this KB article:
http://kb2.adobe.com/cps/405/kb405604.html
Start with 12 & 4 and then go through the rest if needed.

Similar Messages

  • Security error when lightroom attempts to use the internet

    When using plugins e.g. smugmug or facebook after upgrading to Lightroom 3 I get -
    System returned "securityError"when lightroom attempted to use the Internet.
    tried to repair LR3, did not work.  Suggestions on how to fix this?

    Reply
    Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

  • Why I get an error when running a sequence using the LabVIEW operator interface ?

    I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
    Thanks

    Hello Verdulken,
    I have a few additional questions:
    Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
    What is the error that you are receiving?
    Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
    Does the error occur on the step that calls this very same VI again later in the sequence?
    Does your application function correctly if you use the development adapter for all of your calls?
    Thank you in advance for this information,
    Matt G.
    National Instruments
    Applications Engineering

  • HT1926 I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

    I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99885)

  • I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update.  They tried ch

    I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update.  They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

    Wowuor, 
    Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted. 
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software.

    I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software. after about 50% of the way, it just crashes.
    Thank you,
    JTF

    I am having the same problem - the install crashes around 40%. 
    I am using MAC OS 10.10.2 and purchased Acrobat Pro monthly subscription.  The error message is: 
    'Acrobat installer has encountered an unexpected failure.  Please try again.  If it continues to fail, contact Adobe support.'
    I have tried several times but keep getting the same error message.  Any ideas?
    Thanks,
    Cindy

  • I switched to Apple Mail in the last two months.  When I attempt to print an email message, I get a blank piece of paper.  When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened.  Any ideas?

    I switched to Apple Mail in the last two months.  When I attempt to print an email message, I get a blank piece of paper.  When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened.  Any ideas?

    Which version of Mail are you using as well as which Snow Leopard version you are using? 

  • TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

    I get "server error" when I try to use icloud.1 on my Windows 7 pc
    How do I resolve this problem?

    Hi doggywag,
    Yes, you must have an iOS device or a Mac to create an iCloud account.
    Cheers,
    GB

  • I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

    I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website  Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

    Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
    Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

  • Getting an error when i try and download the free photoshop trial

    getting an error when i try and download the free photoshop trial

    I have no problem downloading the trial from http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
    If you still have these problems, try downloading from http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    Make sure you follow the Very Important Instructions on that page.

  • Error when I try to use the XMLElement(), XMLForest(), etc functions?

    I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
    Cheers,
    Fish

    Reply
    Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

  • Everytime I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone.  What is the solution?  The cable is fine and is the original charger!

    Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone.  What is the solution?  The cable is fine and is the original charger!

        Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • Lost my iPad and when I attempt to use the "LOST" feature in icloud, the NEXT and CANCEL buttons are not responding.  I have tried this on 3 different windows based computers.  Any ideas???

    When using icloud because I lost my ipad...when i attempt to use the "LOST" feature the "next" and "cancel" buttons do not respond.  I have attempted this on 3 different windows based computers on 3 different networks.  Any ideas? 

    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

  • I get an error when i try to use my ni 5112

    When I want to use a typical digitiser application or example like one channel scope.vi I get an error at AI group config. This also happens when I want to ackuire a waveform. The device in MAX is ok, the test panels are ok. I constantly get this wessage whenever I want to use the card.
    Any ideas?

    The problem you are having is because you are using an example that uses the NI-DAQ driver as the API. The One Channel Scope.vi is an example program that actually uses MIO DAQ devices and not our High Speed Digitizers. When you look at the example finder in LabVIEW, it will actually give you a list of supported devices for each VI.
    To get the example programs for your high speed digitizer using the NI-SCOPE API, go to Sart>>programs>>National Instruments>>NI-SCOPE>>Examples.
    Best Regards,
    Jeremy R.
    NI - Applications Engineer

  • How do I fix a corrupted admin account? I get an error when I attempt to log in.

    There was a shut down due to a power failure. When the mac started again, it did not show my Home folder, which is on an external drive. The desktop was not correct and everything looks sort of generic, rather than reflecting my preferences.
    I use the Advanced Options in the user accounts to reset my home folder, although it seemed to show the correct location for it. When I changed it, the locations was shown as externaldisc1 rather than externaldisk, which I thought was the correct name (not the real names). I used disk utility to check name of the external disk and it should the volume as externadisk1, so I went ahead and made the change.
    Now I cannot login. I get an message that says Cannot log in at this time because an error occurred.
    I have two drives that I can use as a startup. The internal drive is running 10.9. This is the one that has the problem. I can still login if I startup from the external drive, which is running 10.8, as can be seen below, and is the disk on which the Home Folder is located.

    Well, if it were me, I'd try a couple of other things first:
    - Force a reset of the admin password
    As before, boot into Recovery HD
    From the menu, choose Utilities, Terminal
    Type "resetpassword" (without the quotes) and hit enter
    Select the Macintosh HD volume
    Select your account from the list and give it a new password, click Save
    Restart normally and test
    - Reset your Home directory permissions
    Do steps 1-5 above, choosing yet another password
    Also click "Reset"
    Restart normally and test
    I Believe in trying things that to from the least potential harm to the greatest   if these don't work, please reply back.
    My next choice would be to do a restore from time machine from a point before you had this trouble (you do have backups?) and, in the absence of advice from more experienced community members, you could try the linked article, bearing in mind that a full erase and reinstall might be needed.

Maybe you are looking for